English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 24 November 2011, 07:35   #1
Synthesize Me
Amigaholics Anonymous

Synthesize Me's Avatar
 
Join Date: Aug 2011
Location: Philadelphia, U.S.A./Bautzen, Germany
Age: 29
Posts: 80
Send a message via Skype™ to Synthesize Me
EasyNet wireless card from AmigaKit problems..

Hey everyone,

Once again I come to you with problems... Because nothing ever works out of the box or is easily fixable..
I recently purchased the Easy net wireless PCMCIA kit from amigakit and tried setting it up today by following the manual.
My setup is as follows: A1200 with blizzard 1260+scsi kit running an external scsi cd-rom drive. Kickstart 3.1, Amiga OS 3.9 no boing bags since they cause my Amiga to crash (!?).
So anyway, after everything is setup I reboot and get this error during booting:

C:SetPrism2Defaults failed return code 20
Object name invalid
C:SetPrism2Defaults failed return code 20

Then after everything boots I open easy net and click on go online. Then this message box pops up:

AmiTCP/IP version 3 or later must be started first.

* * * * * * * * *Exit AmiTCP:Bin/IFConfig* * * * * * *

So I click the "exit..." button twice and get the same message but different exit button:

* * * * * * * * * Exit AmiTCP:Bin/Route* * * * * * *

I tried changing the user-startup sequence by deleting the one AmiTCP assign since os 3.9 put an assign for AmiTCP in there for Genisis. I figured maybe the two were conflicting with one another.. I also made sure that the assign for easy net AmiTCP was correct (which it was).
Anyway, I could really use some help here guys because i dont want to contact amigakit just yet.. Thanks for any help you can offer!

Last edited by Synthesize Me; 24 November 2011 at 07:39. Reason: spelling error
Synthesize Me is offline  
AdSense AdSense  
Old 24 November 2011, 14:10   #2
amigakit.com
Registered User

amigakit.com's Avatar
 
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 1,717
It looks like you have not entered your wireless settings correctly into the Wireless Configuration window:



Once you have entered information click SAVE button
amigakit.com is offline  
Old 26 November 2011, 10:23   #3
Synthesize Me
Amigaholics Anonymous

Synthesize Me's Avatar
 
Join Date: Aug 2011
Location: Philadelphia, U.S.A./Bautzen, Germany
Age: 29
Posts: 80
Send a message via Skype™ to Synthesize Me
I'll give this a try when I finally get some free time away from my girlfriend tomorrow hopefully!
Thanks a bunch for the tip, I'll let everybody know if it works out.

I just thought it was strange that it said amitcp/ip needed to be started first...
Synthesize Me is offline  
Old 26 November 2011, 14:00   #4
amigakit.com
Registered User

amigakit.com's Avatar
 
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 1,717
That error message will appear when something is generally not configured properly.
amigakit.com is offline  
Old 06 October 2013, 04:01   #5
Vicky
Registered User
 
Join Date: Sep 2010
Location: Tempe Arizona USA
Posts: 112
Error Messages

Quote:
Originally Posted by amigakit.com View Post
That error message will appear when something is generally not configured properly.
No, that is not the fix. I am having the exact same problems. Same everything.
Vicky is offline  
Old 19 July 2014, 01:54   #6
ancalimon
Supernormal

ancalimon's Avatar
 
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 37
Posts: 1,229
Quote:
Originally Posted by Synthesize Me View Post
C:SetPrism2Defaults failed return code 20
Object name invalid
C:SetPrism2Defaults failed return code 20
This problem is not about the card itself. It seems to be related with some patch causing incompatibility.
Did you find what was causing this? I'm having the same problem with the old version of prism2.device. It seems like I have something (a patch probably) causing this. Will try on a fresh Os3.9 partion.
ancalimon is offline  
Old 19 July 2014, 14:07   #7
FOL
PSPUAE DEV

FOL's Avatar
 
Join Date: Nov 2006
Location: Barry / UK
Age: 39
Posts: 5,592
Send a message via MSN to FOL Send a message via Skype™ to FOL
Quote:
Originally Posted by ancalimon View Post
This problem is not about the card itself. It seems to be related with some patch causing incompatibility.
Did you find what was causing this? I'm having the same problem with the old version of prism2.device. It seems like I have something (a patch probably) causing this. Will try on a fresh Os3.9 partion.
That error is because your still trying to use the old prisma command. You need to remove it from startup as prisma v2.2 driver uses wirelessmanager now, if i recall.
FOL is offline  
Old 13 August 2014, 01:30   #8
ncafferkey
Registered User

 
Join Date: Sep 2013
Location: Ireland
Posts: 31
Quote:
Originally Posted by ancalimon View Post
This problem is not about the card itself. It seems to be related with some patch causing incompatibility.
Did you find what was causing this? I'm having the same problem with the old version of prism2.device. It seems like I have something (a patch probably) causing this. Will try on a fresh Os3.9 partion.
If you really want to use the old prism2.device (WEP only), an error from SetPrism2Defaults usually means it was given the wrong parameters. If you want further advice on this, paste the full command line here.
ncafferkey is offline  
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Easynet wireless PCMCIA from AmigaKit Reynolds support.Hardware 21 18 October 2013 19:23
Does the Amigakit Easynet Wireless Card work with a VM SuperHub? BarryB support.Hardware 44 07 January 2012 01:45
AmigaKit CF card problems! arendal support.Hardware 21 19 August 2010 20:01
Retail News / Sales : Wireless PCMCIA Networking Card from AmigaKit.com Paul News 7 17 December 2007 05:51
PCMCIA wireless netword card problems adgloride support.Hardware 3 23 April 2006 23:01

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 06:52.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Page generated in 0.20307 seconds with 12 queries