11 July 2007, 19:17 | #41 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
it is indeed 60ns, hmmm. I will search my box of known FMP modules that work with apollos, I am sure i have a 16MB that works wonders with it. if i find it you can have it for postage m8.
Just PM me |
13 July 2007, 04:57 | #42 |
Amiga NetRunner
Join Date: Apr 2005
Location: Spain
Age: 45
Posts: 941
|
Thanks zetro for the offer. I'm working on my way of a 32mb simm, and in case i couldn't get one here i will pm you. Very appreciated!.
|
13 July 2007, 19:45 | #43 |
Amiga NetRunner
Join Date: Apr 2005
Location: Spain
Age: 45
Posts: 941
|
While i am working on the 32mb simm, i have been tinkering with the board playing whdload games and some software. Playing whd is perfect, but i have a question regarding doom. I just installed adoom for testing purposes and it plays very well for a 030, but when i have a while playing, the game will freeze and a sound will came from the speaker(bzzzrrrrrrr). I have touched the processor as i have the trapdoor open and it is very hot, you can get hurt if kkep the finger on it. Should the doom prob i listed because of overheating?. I know that in summer all computer components become more hotter, but not know if it affects too much the Amiga.
Thanks in advance!!! |
16 July 2007, 15:16 | #44 |
Amiga NetRunner
Join Date: Apr 2005
Location: Spain
Age: 45
Posts: 941
|
Bump!
|
16 July 2007, 15:22 | #45 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
@TheCrow
030's run toasty any way, and when you put something as CPU intensive as DOOM... its gonna get roasty hot. The system Hangups are a symptom of overheating. I would seriously recomend some passive or preferably Active cooling if you can fit it in you computers case. |
16 July 2007, 16:45 | #46 | |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
Quote:
I think the reason could be that this board has overclocked processors as reported by Amiga resource (from 40 Mhz to 50 Mhz) http://amiga.resource.cx/exp/apollo1230mk1 Sincerly I have no problems with my Blizzard 1230/IV with full 50 Mhz 68030, however I've no FPU (but I don't believe DOOM uses it) and only 16MB. You could have a bugged DOOM version. I would try some long and heavy demos. You can find many of them WHDLoad installed too. |
|
16 July 2007, 17:37 | #47 |
Amiga NetRunner
Join Date: Apr 2005
Location: Spain
Age: 45
Posts: 941
|
Ok, thanks to both of you. Now it seems time to go and butcher an old pc for heatsink and/or a handy fan. Since it is in the original desktop case, can you reccommend anything to increase the height of the case(like some custom legs i hear of another people here) and of what material?.
Thanks in advance!!! |
16 July 2007, 18:32 | #48 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
well to add active cooling, you wil need to slightly modify the trapdor a smidge to allow for this
http://cgi.ebay.co.uk/Video-Card-CPU...QQcmdZViewItem and to affix it to the CPU, use this http://cgi.ebay.co.uk/3M-Thermal-Sti...QQcmdZViewItem Power for the fan can come from the FDD +5v (RED) . Personally i would think about modifying a laptop heatsink / cooler and modify the case. but thats a little more work. |
17 July 2007, 03:47 | #49 |
Amiga NetRunner
Join Date: Apr 2005
Location: Spain
Age: 45
Posts: 941
|
Nice suggestions. These 3m thermal stickers are the same compound as thermal paste of bigger processors like x86 Athlons or Pentiums?
|
17 July 2007, 03:59 | #50 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
@TheCrow
The thermal grab pads (stickers lol) provide heat-transference similar to thermal past / putty, although not as good, still good enough. The 3M thermal grab pads will provide better than adequate heat-transfer to an active cooling solution on an 030 and an active cooling solution will help increase the working life of the 030 accellerator too |
17 July 2007, 04:22 | #51 |
Still an Amiga user
Join Date: Nov 2006
Location: Kent
Age: 55
Posts: 2,715
|
What would you suggest for 060 accelerators Zetr0?
I have a small heat sink from an old PC graphics card which is about the size of a CPU - I was wondering if this would be of any benefit to fit... what would be the best way of "sticking" it on? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Which A500 accelerator? | Mustangjeff | Retrogaming General Discussion | 23 | 10 January 2014 10:26 |
Choosing the right Accelerator | DonAmiga | support.Hardware | 36 | 02 May 2010 14:50 |
Is this an accelerator? | ruffian | Hardware pics | 12 | 16 November 2009 15:29 |
PC / PC Bits for Accelerator | Macca | Swapshop | 0 | 30 January 2008 20:17 |
Accelerator for my A500 | RuitjesRaver | MarketPlace | 16 | 18 October 2005 16:49 |
|
|