so i got that new ECS double scanner.. - Page 2

8bitbubsy · 24 February 2010, 15:09

Get a very thin knife tool and gently push it in, then you can bend the metal thingie back.

Put the knife the way shown on the picture (red line):

Just be careful

Good luck!

lost_lemming · 24 February 2010, 19:20

thanks for that advice, in the end. Had to get a much more experience solderist that myself to do the job of fixing on a new 48 pin socket. Was hard getting it off .... but said was easy getting a new one on. It's in and now and working great!!!!!!!!!!!!!! well you get the odd flicker here and there but I guess it just hasn't warmed up yet

xc8 · 24 February 2010, 19:58

Quote:

Originally Posted by lost_lemming

...well you get the odd flicker here and there but I guess it just hasn't warmed up yet

Does your monitor have an 'autoconfig' button? I have sometimes a 'strange' flicker on the TFT , but its fixed when I press that button.

Chris

lost_lemming · 24 February 2010, 23:02

Quote:

Originally Posted by xc8

Does your monitor have an 'autoconfig' button? I have sometimes a 'strange' flicker on the TFT , but its fixed when I press that button.

Chris

mine has an autotune thingie. but it didn't fix the flickering

24 February 2010, 15:09	#21
8bitbubsy Registered User Join Date: Sep 2009 Location: Norway Posts: 1,709	Get a very thin knife tool and gently push it in, then you can bend the metal thingie back. Put the knife the way shown on the picture (red line): Just be careful Good luck! Last edited by 8bitbubsy; 24 February 2010 at 15:17.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Double PAL / Double NTSC, oficially supported by WHDLoad...	Shoonay	project.WHDLoad	3	15 May 2021 19:42
Double dragon 2 ECS fixed in "The Zone!"	Vollldo	support.Games	66	11 October 2017 02:36
scanner	lost_loven	support.Hardware	1	18 February 2012 07:49
Scanner	amiga	request.UAE Wishlist	2	25 March 2006 13:54
ECS Agnus / Full ECS ChipSets....	Chapas	support.WinUAE	7	17 June 2005 05:27

24 February 2010, 19:20	#22
lost_lemming Registered User Join Date: Aug 2009 Location: Birmingham Age: 38 Posts: 391	thanks for that advice, in the end. Had to get a much more experience solderist that myself to do the job of fixing on a new 48 pin socket. Was hard getting it off .... but said was easy getting a new one on. It's in and now and working great!!!!!!!!!!!!!! well you get the odd flicker here and there but I guess it just hasn't warmed up yet

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)