Is two HD's possible on a SX-32 MK1?

Akiko · 19 May 2013, 22:12

Anyone know if it's possible to have two CF cards Master/Slave hooked up to the IDE connector on the SX32 at the same time?

If not would one of those A1200 buffered IDE interfaces work?

Michael · 22 May 2013, 20:16

Should not be a problem, with the twin ide cable.
But be warned, if you use 2.5" devices, they take power from the ribbon cable and you can overload it and burn it (or the port!).

19 May 2013, 22:12	#1
Akiko Registered User Join Date: Feb 2009 Location: UK Posts: 257	Is two HD's possible on a SX-32 MK1? Anyone know if it's possible to have two CF cards Master/Slave hooked up to the IDE connector on the SX32 at the same time? If not would one of those A1200 buffered IDE interfaces work?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cyberstorm mk1 SCSI LED?	xc8	support.Hardware	3	28 November 2010 21:45
Sega Saturn MK1 screws	alexh	Retrogaming General Discussion	9	19 December 2009 06:03
SX32 MK1 manual?	alexh	support.Hardware	16	20 April 2008 10:56
CS MK1 and kickflash	craven1200	support.Hardware	10	01 January 2008 20:16
CyberStorm Mk1 and other amiga parts	brknck	MarketPlace	1	05 September 2002 11:46

22 May 2013, 20:16	#2
Michael A1260T/PPC/BV/SCSI/NET Join Date: Jan 2013 Location: Moscow / Russia Posts: 840	Should not be a problem, with the twin ide cable. But be warned, if you use 2.5" devices, they take power from the ribbon cable and you can overload it and burn it (or the port!).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)