PC to Amiga1200 Problem... =(

bytestorm · 23 March 2003, 11:06

I tried Amiga Explorer but i can't run the Setup... (on the amiga side) the cable works...cuz i get the files to my amiga but...well ...here is the whole process:

First i run setup on the PC side then i'm asked to do the following:

it starts fine, first i have to type:

Type SER: to RAM:Setup
*that works..i get the setup file to my amiga RAM*

then next i'm prompted to type:

RX RAM:Setup
*then i get this info:*
ARexx Version 1.15
Copyright © 1987 by William S. Hawes
All Rights Reserved.
Command returned 5/1: Program not found

!!!!!!
""Command returned 5/1: Program not found""
i get this every time i try... what is wrong?
please...

i have tried 100 of times... i have tried to run it from a floppy instead:

SER: to DF0:Setup
then
RX DF0:Setup

but still get the same error.....i'm running XP by the way....

anyone know a good way/program to transfer files from the PC to AMiga1200 with?? i use a null modem cable.

thanks in advance.

//The-ultra-amiga-n00b...=/

Miggy2TheMax · 23 March 2003, 11:28

I use twin, it can be downloaded from aminet. Twin is just a command line tool to transfer files thru NULL between you amiga and PC. The only thing with running twin on PC is that you need to be in DOS. I know running twin from DOS prompt window _within_ win95 will not work, you need to quit out of windows all together, into a DOS prompt. Keeping that in mind I don't know how twin will behave under XP, never tried it.

scaf · 23 March 2003, 11:32

The Amiga Explorer method with Arexx never worked here.
So I booted my Amiga with a Workbench 1.3 and used the other method, with wb1.3. (you know : AmigaExplorer asks you if you have a WB2.0 (or above) or 1.3)

If you have a WB1.3 floppy, you can try this method

bytestorm · 23 March 2003, 11:42

too bad i dont have any wb disc lower than 3.0....=((((

mess · 23 March 2003, 12:19

Hi Bytestorm

You can try Network Pc I have used it for a long time now
and it works great.
Follow this link http://www.weirdscience.co.uk/produc...etworkpc.shtml

haribootje · 06 May 2003, 10:22

Can you provide the pinouts of this cable for us ? So we can rebuild ???

mess · 07 May 2003, 17:39

YesI can

I work 14 hours every day now so I try this friday or saterday, so I will try too get it up sunday.

haribootje · 08 May 2003, 01:32

Okay, Great !!

23 March 2003, 11:06	#1
bytestorm Registered User Join Date: Mar 2003 Location: sweden Posts: 36	PC to Amiga1200 Problem... =( I tried Amiga Explorer but i can't run the Setup... (on the amiga side) the cable works...cuz i get the files to my amiga but...well ...here is the whole process: First i run setup on the PC side then i'm asked to do the following: it starts fine, first i have to type: Type SER: to RAM:Setup that works..i get the setup file to my amiga RAM then next i'm prompted to type: RX RAM:Setup then i get this info: ARexx Version 1.15 Copyright © 1987 by William S. Hawes All Rights Reserved. Command returned 5/1: Program not found !!!!!! ""Command returned 5/1: Program not found"" i get this every time i try... what is wrong? please... i have tried 100 of times... i have tried to run it from a floppy instead: SER: to DF0:Setup then RX DF0:Setup but still get the same error.....i'm running XP by the way.... anyone know a good way/program to transfer files from the PC to AMiga1200 with?? i use a null modem cable. thanks in advance. //The-ultra-amiga-n00b...=/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PS2 Keyboard and AMIGA1200	snowman	support.Hardware	21	03 August 2015 21:57
Please help about Amiga1200	kaushikkalu	New to Emulation or Amiga scene	20	22 February 2010 19:49
Wanted: New (or near new) boxed Amiga1200	zerec@hotmail.d	MarketPlace	14	19 December 2009 13:40
Can some one help me please with my amiga1200.	powerslam1973	Amiga scene	2	29 December 2008 17:34
Amiga1200	cosmiq	Retrogaming General Discussion	45	26 May 2005 23:31

23 March 2003, 11:28	#2
Miggy2TheMax Junior Member Join Date: Jan 2002 Location: Australia Age: 45 Posts: 381	I use twin, it can be downloaded from aminet. Twin is just a command line tool to transfer files thru NULL between you amiga and PC. The only thing with running twin on PC is that you need to be in DOS. I know running twin from DOS prompt window _within_ win95 will not work, you need to quit out of windows all together, into a DOS prompt. Keeping that in mind I don't know how twin will behave under XP, never tried it.

23 March 2003, 11:32	#3
scaf Registered User Join Date: Jan 2003 Location: france Age: 48 Posts: 116	The Amiga Explorer method with Arexx never worked here. So I booted my Amiga with a Workbench 1.3 and used the other method, with wb1.3. (you know : AmigaExplorer asks you if you have a WB2.0 (or above) or 1.3) If you have a WB1.3 floppy, you can try this method

23 March 2003, 11:42	#4
bytestorm Registered User Join Date: Mar 2003 Location: sweden Posts: 36	too bad i dont have any wb disc lower than 3.0....=((((

23 March 2003, 12:19	#5
mess Registered User Join Date: Jan 2002 Location: Copenhagen/ Denmark Posts: 30	Hi Bytestorm You can try Network Pc I have used it for a long time now and it works great. Follow this link http://www.weirdscience.co.uk/produc...etworkpc.shtml

06 May 2003, 10:22	#6
haribootje Registered User Join Date: Apr 2003 Location: Holland/Germany Age: 52 Posts: 73	Can you provide the pinouts of this cable for us ? So we can rebuild ???

07 May 2003, 17:39	#7
mess Registered User Join Date: Jan 2002 Location: Copenhagen/ Denmark Posts: 30	YesI can I work 14 hours every day now so I try this friday or saterday, so I will try too get it up sunday.

08 May 2003, 01:32	#8
haribootje Registered User Join Date: Apr 2003 Location: Holland/Germany Age: 52 Posts: 73	Okay, Great !!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)