Uae4All2-SDL Amiga Emulator for Android

[lubomyr]

Few words about SWOS and career mode
Generally game freezes with start in career mode
But i found out some settings when game not freezes
With settings: CPU speed 56Mhz and ECS chipset - career mode works (without freezes or graphics glitches)
Also career mode works with settings: CPU speed 115Mhz (ECS or AGA) but exist graphics glitches

[FOL]

Originally Posted by lubomyr

Few words about SWOS and career mode
Generally game freezes with start in career mode
But i found out some settings when game not freezes
With settings: CPU speed 56Mhz and ECS chipset - career mode works (without freezes or graphics glitches)
Also career mode works with settings: CPU speed 115Mhz (ECS or AGA) but exist graphics glitches

Think it needs Cycle Exact.

[lubomyr]

My custom configs for few pinball games:

SlamTilt AGA
config
game screenshot
Custom screen
OnScr. screen
pos. screen

Pinball Illusion AGA
config
game screenshot
Custom screen
OnScr. screen
pos. screen

Pinball Prelude OCS/ECS
config

[lubomyr]

uae4all2-sdl-2.3.5.7.apk
uae4all2-sdl-2.3.5.7-neon.apk

2.3.5.7 (changes)
- (GUI) added sliders for memory managment
- Added hack for blitter stuck (thanks to TomB)
- Bugfix in custom_bget -> HoneyComb-Demo now working (thanks to TomB)
- Improved blitter compatibility a bit (thanks to TomB)
- Added Immediate Blitter

[rsn8887]

Originally Posted by pbareges

- Shield gamepad has one d-pad and two analog sticks so it would be nice to be able to map mouse and joystick to anyone oh those. especially for the mouse. I tried all of the mapping options but none of them seemed to work..
-and this is it!!

I just got myself a Shield also, and I second that. Is it possible to map Joystick Up/Down/Left/Right to the digital gamepad? This would be a great improvement!

The shield comes with an input mapper, but with that one diagonals do not work on the dpad.

[amiga1200gamer]

Originally Posted by rsn8887

I just got myself a Shield also, and I second that. Is it possible to map Joystick Up/Down/Left/Right to the digital gamepad? This would be a great improvement!

The shield comes with an input mapper, but with that one diagonals do not work on the dpad.

Agreed, it would be good to see d-pad support at some point. I have a nyko playpad (which is supposed to be shield compatible) and the Dpad is much more precise for digital old games/emulators

Presuming the mappings are the same as the shield, the d-pad is seen as a POV HAT with the following input events

AXIS_HAT_X -1 (dpad left)
AXIS_HAT_X 1 (dpad right)
AXIS_HAT_Y -1 (dpad up)
AXIS_HAT_Y 1 (dpad down)

It is not mappable through uae4all2 menus or the "remap physical keys" in the initial SDL device configuration.

There was sdl hat mappings for amiga joystick in the dreamcast/gizmondo version. Something similar would likely need porting over http://sourceforge.net/p/uae4all/cod...src/od-joy.cpp
However since the hat isnt detected as a "remap physical key" in android/SDL device configuration maybe it would need adding there too.

how bring i my amiga-hd-DIR to functioning with uae4all2

[FOL]

Originally Posted by mbus

how bring i my amiga-hd-DIR to functioning with uae4all2

Setup HDD HDF or DIR in WinUAE, then put it in the correct folder on your android device then select it in the menu.

yes, thats mz problem, i don|t know the correct folder. i dont find it on mz android. the adf files i already
put into the correct folder.

[FOL]

Originally Posted by mbus

yes, thats mz problem, i don|t know the correct folder. i dont find it on mz android. the adf files i already
put into the correct folder.

Put it in the root folder for uae4all2, then use uae4all browser to find it.

Hi Lubomyr,

would you please consider implementing support for the D-Pad on the Samsung Game Pad? Though its fire buttons can be mapped to custom functions, the directions on the digital game pad do not work at all. Most Amiga classics do not play well with the analog slide controls. Thanks a lot in advance!

[lubomyr]

playaddict,
I think it similar as Nvidia shield dpad problem.
DPAD - detected in system as 3-rd joystick (not as physical buttons up,down,left,right) (1-st and 2-nd joystick used by analog pads)
As pelya informed me, libSDL still not supported use more than two joysticks.
I hope it will be fixed soon.

[endre1952]

How do I access the Amiga keyboard on the Xperia Play? I don't mean the generic Android keyboard, but the one built into the emulator. I'm able to access it on my JXD S7800b console.

[Amigajay]

Hi, its been a while since i played with uae4all2 on my nvidia shield, but since the last Android update it fails to load my hd file, just Stays on white screen, i'm using kgload launcher for the hd dir any help appreciated!

[lubomyr]

Test version with Nvidia Shield gamepad (digital joystick) support
https://dl.dropboxusercontent.com/u/...t-16102014.apk
Please check if it works

[FOL]

Originally Posted by lubomyr

Test version with Nvidia Shield gamepad (digital joystick) support
https://dl.dropboxusercontent.com/u/...t-16102014.apk
Please check if it works

Im having lots of problems with the later versions.
None of kickstarts and hdf's that used to work anymore.

I cant find the version they originally worked on.
I have since given up on trying, .

[amiga1200gamer]

Originally Posted by lubomyr

Test version with Nvidia Shield gamepad (digital joystick) support
https://dl.dropboxusercontent.com/u/...t-16102014.apk
Please check if it works

Hi lubomyr

I have tested this with my Nyko playpad (shield compatible)
I can confirm the DPAD is now working as well as the analogue thumbstick.. i can now use either.

One small problem is with Diagonals. if you press a diagonal direction perfectly it works, but rolling your thumb around the dpad ignores the diagonals.

For exampleThe nyko sends an AXIS_HAT_X 1 >AND< AXIS_HAT_Y 1 for down-right. Pressed accurately this works.

Rolling your thumb from right (AXIS_HAT_X 1 AXIS_HAT_Y 0) to down (AXIS_HAT_X 0 AXIS_HAT_Y 1) does not detect a X1+Y1 state.

Im not sure if this is an issue that would affect the official shield, hopefully someone will test it.

Thanks again for your hard work.

Edit: i love looking at changes to pelyas code. on github the code was called
private static final CrappyDragonRiseDatexGamepadInputWhichNeedsItsOwnHandlerBecauseImTooCheapAndStupidToBuyProperGamepad

Hi Lubomyr,

thanks a lot for crafting the digital joystick test version. I can confirm that it actually works with the Samsung game pad digital input, too. However, I also have to confirm amiga1200gamer's findings:

Originally Posted by amiga1200gamer

One small problem is with Diagonals. if you press a diagonal direction perfectly it works, but rolling your thumb around the dpad ignores the diagonals.

Rolling your thumb from right (AXIS_HAT_X 1 AXIS_HAT_Y 0) to down (AXIS_HAT_X 0 AXIS_HAT_Y 1) does not detect a X1+Y1 state.

This also applies to the Samsung. For example, it is nearly impossible to perform a proper jump in Turrican where you have to jump (joystick up) while running (joystick left or right) at the same time. Using the analog nub, this works flawlessly.

Maybe you can work this out?

[lubomyr]

playaddict,
I hope it will be fixed. Thanks for feedback

[lubomyr]

Final fix for Nvidia Shield gamepad support. Thanks to pelya

uae4all2-sdl-2.3.6.0-neon.apk