|
14 July 2018, 10:34
|
#1 |
|
Registered User
Join Date: Jun 2018
Location: Hamburg
Age: 55
Posts: 56
|
Micromys 4 better cable
Was bothered from bad contact with the micromys adapter, because the 9-Pin in the A600/1200 sit deeper than the case. So it's not possible to get fitting contact with the metal plug and the A600 does not have screws to pull the contacts together. So the solution was to change the cable to half of a joystick extender.
Inside the micromys is a 10 pin double row with a plug, here you can squeeze the new cables. Pin 7 as ground metal is not used, so 1-6 and 8-10 must be connected. Result: Perfect fit 
|
|
|
14 July 2018, 19:04
|
#2 |
|
Registered User
Join Date: May 2008
Location: Mason, Ohio / USA
Age: 48
Posts: 391
|
Nice solution!
|
|
|
|
14 July 2018, 21:14
|
#3 |
|
Registered User
Join Date: Sep 2007
Location: Stockholm
Posts: 4,332
|
I don't understand why commercial mouse adaptors either use a stiff housing plugged directly into the mouse port or a cable made for serial ports. All adaptors I make use at least a flat cable.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Micromys 4 - Bad experience | Solderbro | support.Hardware | 5 | 28 June 2018 19:27 |
| An optical PS/2-mouse, which works with Micromys? | emuola | support.Hardware | 3 | 24 October 2017 07:21 |
| Micromys v4 woes | chromium | support.Hardware | 4 | 19 January 2015 09:43 |
| Micromys V4 featuring auto-detect | Schoenfeld | News | 9 | 21 March 2014 11:01 |
| Micromys driver needed? | Mr B | project.ClassicWB | 2 | 10 August 2012 15:07 |
|
|
