18 August 2004, 18:42 | #1 |
Posts: n/a
|
GVP G-force 030 board for A2000-problem switching between 030 and 68k
Hello, just found this site, will register, but just wanted some help with my 030 accelerator board. The problem I'm having is in disabling the 030 board to run older software that is not compatible. The instructions say that jumper J11 disables the board to allow the A2000 to operate in regualr 68k mode. this doesn't seem to work right, sometimes it seems to do nothing and the Amiga boots up with the 030 board activated no matter if the J11 jumper is opern or closed, other times it just seems to disable the entire computer and nothing hapens when I turn it on except for the HD starts up. Does anyone have this G-force board that can help me? Is there another way to disable the board for software compatibility? I've had a LOT of problems finding the correct use of the jumpers for this thing, the origianl instructions are bogus, I finally got it working by finding the jumper settings for my particular 40mhz/mmu/68882/030 board online, but disabling the board without opening up the Amiga and actually removing the board has eluded me. PLEASE HELP!!!
|
18 August 2004, 23:32 | #2 |
Registered User
Join Date: Aug 2004
Location:
Posts: 3,347
|
If you download the GVP install/tools disk (which is/was available at http://www.gvp-m.com/), you can use the GvpCPUCtrl command to go into 68000 mode:
GvpCpuCtrl BOOT68000 It's quite simple to modify your startup-sequence so that command is called if e.g. the left mouse button is pressed while booting. -- M |
19 August 2004, 01:48 | #3 |
Posts: n/a
|
Their download page doesn't work so I uploaded a disk to the zone which might be the one you are talking about. (Only registered members can access the zone.)
|
19 August 2004, 05:37 | #4 |
Posts: n/a
|
Thankyou very much, but is there a URL for the zone? is it just the zone.com or something? I'll try that...
|
19 August 2004, 06:01 | #5 |
Posts: n/a
|
thanks for the help guys, but I just stumbled upon the disk for the G-force030...never knew I had it!
|
19 August 2004, 10:04 | #6 | |
Posts: n/a
|
Good to hear that but if you ever need to access the zone then:
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A1200 030/40mhz faster than A2000 030 50mhz? | desantii | support.Hardware | 24 | 28 July 2011 23:50 |
GVP G-Force 030 / 50MHz Accelerator Problems | hurtz | support.Hardware | 5 | 15 January 2011 18:22 |
GVP G-Force 030/40 combo problem with A2000 | keropi | support.Hardware | 8 | 17 January 2008 21:27 |
FS : GVP G-Force 030 Combo for Amiga 2000 | coze | MarketPlace | 14 | 07 June 2007 10:20 |
FS: GVP G-Force 030 Combo for Amiga 2000 | coze | MarketPlace | 0 | 01 June 2007 00:45 |
|
|