Just install a tiny push-button on my Amiga keyboard to control AGA/RTG ! - Page 2

wizard66 · 10 October 2006, 18:34

MMmmm.. I Love this migi Forum big time

wizard66 · 03 November 2006, 16:10

Hardware is setup right now.
I only need the software CGXPatch can't find it on aminet or any other place for that mater.
Anybody have the proggie ?

Nevermind found it will be testing now

keropi · 03 November 2006, 16:53

oh yes, tell us how it goes!!! please!

wizard66 · 03 November 2006, 18:50

Software installed but need cgxsystem.library v42.7 it say´s
But i think that library is a part of cybergraphics4.
I´m useing p96 drivers for my picallo card.
my cybergraphic cd only has v42.0 .so i´m

So i need CGXSYSTEM.LIBRARY v42.7 to continue this quest.
I think you have to use cybergraphics insted of p96.
If I get hold of version 42.7 i will make a new install.

keropi · 03 November 2006, 18:53

cgx > p96

cgx rules, do you have the CGX4 cd?

wizard66 · 03 November 2006, 19:17

Quote:

Originally Posted by keropi

cgx > p96

cgx rules, do you have the CGX4 cd?

Yes I have a original also a update disk to v42.1

I have removed the p96 in monitors and installed cg4 from flopy.
Then the install from cd takes over for the rest of the install
but CGXPatch is not patching the library wrong version

keropi · 03 November 2006, 19:22

damn!!!!
searched aminet for an update?

wizard66 · 03 November 2006, 19:26

Yup, no dice :-(

I Need a update disk to v42.7 i think.
mebay there was a single library but not likely.

keropi · 03 November 2006, 19:45

we must make a new thread requesting it!

wizard66 · 03 November 2006, 20:00

Quote:

Originally Posted by keropi

we must make a new thread requesting it!

Yeay okey I think your right, i'm searching into my flopy's right now all 10.000 of them.
feel free to open a new thread about it, thanks.

keropi · 03 November 2006, 20:34

http://phase5.a1k.org/index.php?id=3

here it is! thanx to an a.rog user!

wizard66 · 04 November 2006, 10:51

Quote:

Originally Posted by keropi

http://phase5.a1k.org/index.php?id=3

here it is! thanx to an a.rog user!

Hey Great Thanks.

Well it's working now!!!! hey i'm very happy.

I have a piccalo and a scanmagic (internal version) on this board.
My new mediator is on this way i hope it will also work.
Vga card is a voodoo5 5500 64mb.
I don't know if the mediator suports CGX.

thank for your help Keropi

keropi · 04 November 2006, 11:37

you mean it works fully automatic? you have a piccolo workbench, run a whdload game and the switch is automatic?
...and unfortunatelly mediator uses picasso96 and not cgx...

wizard66 · 04 November 2006, 12:05

Quote:

Originally Posted by keropi

you mean it works fully automatic? you have a piccolo workbench, run a whdload game and the switch is automatic?
...and unfortunatelly mediator uses picasso96 and not cgx...

Yip,
I Have a piccolo workbench screen 1024*768 played cannon fodder cd 32 version and it is auto switching all on one pc monitor..

So i have mebay a problem withe the mediator then ?

keropi · 04 November 2006, 12:19

yes, there are no cgx drivers for mediator, mediator only has picasso96 drivers... so this patch won't work...

wizard66 · 04 November 2006, 12:32

Damm !!

That's a setback for me !!
Mebay there is a progie that works withe P96 ?
I hope so because i was almost there.
I just buyed a brandnew 3000/4000 mediator at elbox.

By the way the transistor i used was a BC458
The picture shows the transitor (this is the test fase so soldering is not very good a.t.m)

keropi · 04 November 2006, 13:26

oh, thanx for this pic!
I do not actually test it,the cs-ppc on my setup is broken...

wizard66 · 04 November 2006, 13:53

Quote:

Originally Posted by keropi

oh, thanx for this pic!
I do not actually test it,the cs-ppc on my setup is broken...

Okey then,

You have your one problems is see. If your cyberstormPPC has broken then its no good news.

Anyway the autoswitch is working look at pic howe to install transistor and resistor.

So I'm looking for a p96 patch or other program for useing this pice of hardware under picasso96 drivers.
Anybody any clu ??

wizard66 · 25 November 2006, 16:02

Can somebody please patch this driver for me ?
I don't no any code !!

04 November 2006, 12:32	#36
wizard66 FPGA Replay inside A590 Join Date: Sep 2004 Location: Rotterdam/Netherlands Age: 57 Posts: 294	Damm !! That's a setback for me !! Mebay there is a progie that works withe P96 ? I hope so because i was almost there. I just buyed a brandnew 3000/4000 mediator at elbox. By the way the transistor i used was a BC458 The picture shows the transitor (this is the test fase so soldering is not very good a.t.m) Last edited by wizard66; 11 May 2011 at 08:34.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Control amiga mouse with PC keyboard	geecab	support.WinUAE	2	16 August 2011 19:41
Wanted CHINON floppy drive push button A1200	xraynorm	MarketPlace	0	21 February 2011 20:33
Push-Over with keyboard? NTSC version?	stet	support.Games	2	20 January 2009 14:40
Push Push Penguin for Amiga	tomcat666	Amiga scene	16	09 October 2004 19:37
AMIGA Keyboard button	Sebastian	support.WinUAE	4	08 May 2002 19:07

10 October 2006, 18:34	#21
wizard66 FPGA Replay inside A590 Join Date: Sep 2004 Location: Rotterdam/Netherlands Age: 57 Posts: 294	MMmmm.. I Love this migi Forum big time

03 November 2006, 16:10	#22
wizard66 FPGA Replay inside A590 Join Date: Sep 2004 Location: Rotterdam/Netherlands Age: 57 Posts: 294	Hardware is setup right now. I only need the software CGXPatch can't find it on aminet or any other place for that mater. Anybody have the proggie ? Nevermind found it will be testing now

03 November 2006, 16:53	#23
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	oh yes, tell us how it goes!!! please!

03 November 2006, 18:50	#24
wizard66 FPGA Replay inside A590 Join Date: Sep 2004 Location: Rotterdam/Netherlands Age: 57 Posts: 294	Software installed but need cgxsystem.library v42.7 it say´s But i think that library is a part of cybergraphics4. I´m useing p96 drivers for my picallo card. my cybergraphic cd only has v42.0 .so i´m So i need CGXSYSTEM.LIBRARY v42.7 to continue this quest. I think you have to use cybergraphics insted of p96. If I get hold of version 42.7 i will make a new install.

03 November 2006, 18:53	#25
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	cgx > p96 cgx rules, do you have the CGX4 cd?

03 November 2006, 19:22	#27
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	damn!!!! searched aminet for an update?

03 November 2006, 19:26	#28
wizard66 FPGA Replay inside A590 Join Date: Sep 2004 Location: Rotterdam/Netherlands Age: 57 Posts: 294	Yup, no dice :-( I Need a update disk to v42.7 i think. mebay there was a single library but not likely.

03 November 2006, 19:45	#29
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	we must make a new thread requesting it!

03 November 2006, 20:34	#31
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	http://phase5.a1k.org/index.php?id=3 here it is! thanx to an a.rog user!

04 November 2006, 11:37	#33
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	you mean it works fully automatic? you have a piccolo workbench, run a whdload game and the switch is automatic? ...and unfortunatelly mediator uses picasso96 and not cgx...

04 November 2006, 12:19	#35
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	yes, there are no cgx drivers for mediator, mediator only has picasso96 drivers... so this patch won't work...

04 November 2006, 13:26	#37
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	oh, thanx for this pic! I do not actually test it,the cs-ppc on my setup is broken...

25 November 2006, 16:02	#39
wizard66 FPGA Replay inside A590 Join Date: Sep 2004 Location: Rotterdam/Netherlands Age: 57 Posts: 294	Can somebody please patch this driver for me ? I don't no any code !!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)