Cybervision 64/3D and setpatch

[JackLeather]

Originally Posted by thomas

then IMHO you are still using the Commodore 68040(old).library, because 68040.library (the dummy) is loaded first, checks which accelerator is present and then loads either 68040old or 68040new.library depending on what hardware it found.

If i run 'version 68040.library' in the shell i get 46.5 - does this sound like i am using the new library? should i just do away with dummy/old/new and replace the old library with the new phase 5 one?

[thomas]

should i just do away with dummy/old/new and replace the old library with the new phase 5 one?

That's what I'd try to do.

[JackLeather]

Originally Posted by thomas

That's what I'd try to do.

OK, i just replaced the original commodore 68040.library with the phase 5 one and all works well (getting rid of old/new/dummy etc). i have also modifed the post above.

Also, is there a thread or definitive list of the best versions of standard libraries?

[TheCorfiot]

@JL

I'm also using the Phase 5 v46.5 68040 library with my A4000 / A3640 & found it stopped random crashes & improved overall stability so I would stick with it for sure.

TC