22 May 2015, 22:42 | #1 |
Registered User
Join Date: Feb 2013
Location: Fort William
Posts: 122
|
Preparing CF in WinUAE
I'm using WinUAE on a virtualised Windows 7 machine (my host is MAC). I have a USB CF Card reader attached.
Now, I HAVE prepared a CF card on this very same configuration before, but for the life of me I cannot remember what I did, and I can't seem to get it working now. I have used Diskpart to clean the CF card, and I can attach it in WinUAE and I select IDE0. Now regardless of which machine config I choose (A500, A500+, A1200 etc), when I load HDToolBox, I get a message saying Driver Not Loaded. |
23 May 2015, 00:35 | #2 |
Games-Coffer
Join Date: Aug 2012
Location: London / England
Posts: 131
|
Hi,
Are you running WinUAE in Administrator mode? |
23 May 2015, 07:43 | #3 |
Registered User
Join Date: Feb 2013
Location: Fort William
Posts: 122
|
Yes I am.
|
23 May 2015, 09:21 | #4 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,518
|
Most common reason: Mainboard hardware config is not correct. Chipset panel chipset extra must be IDE compatible (A600, A1200 or A4000) and KS ROM must match.
|
23 May 2015, 22:43 | #5 |
Registered User
Join Date: Feb 2013
Location: Fort William
Posts: 122
|
Ok, I've managed to partition and format the CF card. I've created DH0 as a 100MB partition using PFS3DS as the file system with a Max Transfer of 0x1FE00
My next problem is that I cannot boot from this CF using the standard CDTV configuration. I have a custom 1.3 kickstart which has the patched SCSI.DEVICE (using http://aminet.net/package/util/boot/kick13scsipatch). |
24 May 2015, 00:18 | #6 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,001
|
PFS3DS needs Kick 2.0 at least. Try PFS3AIO instead. http://aminet.net/package/disk/misc/pfs3aio
|
24 May 2015, 11:24 | #7 |
Registered User
Join Date: Feb 2013
Location: Fort William
Posts: 122
|
Thomas - it is PFS3AIO that I am trying - I have put the PFS3_aio-handler into the RDB, and when I choose which File System to use, it shows as PDS\03
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Preparing CF Card in WINUAE | actualreality | support.WinUAE | 7 | 13 April 2012 23:03 |
Preparing | commodoresales | New to Emulation or Amiga scene | 7 | 25 March 2012 12:21 |
Noob preparing a 20gb HD for an A1200 in Winuae. Halp! | benzocaine | New to Emulation or Amiga scene | 2 | 04 February 2010 21:47 |
Preparing 8gb CF in Winuae for transfer to real Amiga 1200 | Molcos | New to Emulation or Amiga scene | 4 | 09 March 2008 18:12 |
Preparing HDD for Amiga using WinUAE? | Fingerlickin_B | support.Hardware | 4 | 20 April 2007 17:10 |
|
|