I can't view no more AMR pages! - Page 2

Codetapper · 14 January 2008, 23:21

Well I can't see any reason why that happens, every midnight RCK runs a script that resets the scan counts back to 0 each day. Unless your IP address changes all the time I can't think what can be done... I've reset the counts back to 0 this instant so jump on and see what it says now, should be on 0.

15 January 2008, 08:42

Yep - that sorted it

I can't see how this could have happened either - might have been the phase of the moon! Unless my ISP is doing NAT through IPs - the web server logs may tell you if there were any requests for scans from that IP over the past couple of days.

Many thanks for your response, and a magnificent site.

AlfaRomeo · 15 January 2008, 09:41

Now I can view the pages again.
The IP I put is the IP that I read in IPconfig and that the site Whatsmyip.org reports. Im at the office of the companny I work that have a network with hundreds of PC´s but I doubt that there is another persons with amiga interests

Any way I´m glad that now can view more amiga mags..
Thanks Codetapper

matthew · 20 February 2008, 14:51

Last week I had to reconnect my router and wifi setup, at first I was able to read pages on AMR but now I haven't been able to read any for 5 days.

I've attached an image which shows my IP address.

Codetapper · 20 February 2008, 21:11

I have reset it again back to 0. How about next time you login, before you look at a single page you check to see what the count is at. It should be at 0 every day, if it's not then your IP is probably being used by someone else before you are.

matthew · 21 February 2008, 05:25

Thanks for the help.

27 February 2008, 19:21

I havn't been able to to view any pages for over a week now.

It says I have viewed the maximum amount of images.

My IP is 87.81.26.7

Thanks in advance for any help

Galaxy · 27 February 2008, 21:00

I've tried resetting the scan counts - hope this works. If not I'm afraid I can't help you and you'll have to contact codetapper.

Codetapper · 27 February 2008, 21:23

Quote:

Originally Posted by kenny8373

I havn't been able to to view any pages for over a week now.

It says I have viewed the maximum amount of images.

My IP is 87.81.26.7

Thanks in advance for any help

Can you guys please follow my instructions? When you view the site for the FIRST time each day, look at the bottom and see if the bar is showing 0 scans viewed. If it is on the maximum before you start everyday (and tell me what the number is) then that at least gives me something to go on. Just saying I can't view any gives me little to go on and I have sod all spare time to investigate without having to run a detective agency to find out basic details!

27 February 2008, 23:20

Sorry for the hassle Codetapper.

I have been getting on the site for the last week it has said i have viewed the maximum 200 pages.

20 February 2008, 14:51	#24
matthew Zone Friend Join Date: Jun 2006 Location: England Age: 46 Posts: 108	Last week I had to reconnect my router and wifi setup, at first I was able to read pages on AMR but now I haven't been able to read any for 5 days. I've attached an image which shows my IP address. Attached Thumbnails

27 February 2008, 19:21	#27
kenny8373 Posts: n/a	Viewed the maximum pages I havn't been able to to view any pages for over a week now. It says I have viewed the maximum amount of images. My IP is 87.81.26.7 Thanks in advance for any help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pages with Amiga gamemusic	mai	request.Modules	8	04 September 2011 16:02
All pages?	Amiga1992	AMR suggestions and feedback	17	05 June 2009 07:16
REQ:The one amiga 77 (pages 24-26)	Orion	AMR suggestions and feedback	5	18 June 2008 17:59
AMR now has 32,500 scanned pages!	Galaxy	AMR news	24	14 September 2007 01:39
Irfan view	Fred the Fop	Retrogaming General Discussion	34	30 July 2002 11:49

14 January 2008, 23:21	#21
Codetapper 2 contact me: email only! Join Date: May 2001 Location: Auckland / New Zealand Posts: 3,182	Well I can't see any reason why that happens, every midnight RCK runs a script that resets the scan counts back to 0 each day. Unless your IP address changes all the time I can't think what can be done... I've reset the counts back to 0 this instant so jump on and see what it says now, should be on 0.

15 January 2008, 08:42	#22
myk Posts: n/a	Yep - that sorted it I can't see how this could have happened either - might have been the phase of the moon! Unless my ISP is doing NAT through IPs - the web server logs may tell you if there were any requests for scans from that IP over the past couple of days. Many thanks for your response, and a magnificent site.

15 January 2008, 09:41	#23
AlfaRomeo A1200 040 SAM440EP 667 Join Date: Jan 2008 Location: Lisbon / Portugal Posts: 873	Now I can view the pages again. The IP I put is the IP that I read in IPconfig and that the site Whatsmyip.org reports. Im at the office of the companny I work that have a network with hundreds of PC´s but I doubt that there is another persons with amiga interests Any way I´m glad that now can view more amiga mags.. Thanks Codetapper

20 February 2008, 21:11	#25
Codetapper 2 contact me: email only! Join Date: May 2001 Location: Auckland / New Zealand Posts: 3,182	I have reset it again back to 0. How about next time you login, before you look at a single page you check to see what the count is at. It should be at 0 every day, if it's not then your IP is probably being used by someone else before you are.

21 February 2008, 05:25	#26
matthew Zone Friend Join Date: Jun 2006 Location: England Age: 46 Posts: 108	Thanks for the help.

27 February 2008, 21:00	#28
Galaxy Registered User Join Date: May 2004 Location: Canberra, Australia Age: 46 Posts: 1,417	I've tried resetting the scan counts - hope this works. If not I'm afraid I can't help you and you'll have to contact codetapper.

27 February 2008, 23:20	#30
kenny8373 Posts: n/a	Sorry for the hassle Codetapper. I have been getting on the site for the last week it has said i have viewed the maximum 200 pages.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)