21 September 2014, 22:48 | #721 | |
PSPUAE DEV
|
Quote:
Once loaded though I can slide it to right. |
|
22 September 2014, 00:14 | #722 |
Zone Friend
Join Date: Nov 2005
Location: Italy
Posts: 139
|
WinUae beta 14-17 hangs when you press pag-up for Action Replay Mode.
Beta 13 is last working version. |
22 September 2014, 03:00 | #723 |
Registered User
Join Date: Sep 2011
Location: USA North America
Posts: 211
|
I am getting very erratic behavior from FXpaint and from VHI studio which is also from IO Spirit. I am using FXpaint 2.01. I assume it is due to some fault or defeciency in the Qemu emulation. It worked fine in the pre Qemu betas but was extremely slow. All the other PPC software I have tried has worked very well with Qemu except these two IO Spirit programs. There is a slight improvement from beta 16 and I usually get both programs to start but they both freeze at some point. VHI studio usually gets a bit further and I get to the point where it seems to be working but it freezes when I try to do something. FXPaint freezes on loading but I can still use the workbench and other software with a partially loaded FX screen.
|
22 September 2014, 13:08 | #724 |
m68k all the way
Join Date: Aug 2011
Location: Koalaland
Posts: 523
|
|
22 September 2014, 13:53 | #725 |
Registered User
Join Date: Sep 2011
Location: Paris/France
Posts: 274
|
Hello
(Beta17 works here too) some questions 1) In the "Cpu and Fpu" settings : Does the "PPC CPU Options" are the only options that impact ppc emulation/speed ? Or does some options impact both 68k and ppc ? 2)From amiga side is there a way to obtain a 32 bit wb screen (not 16/24bits) ? using an other RTG card ? Thanks Alain Thellier |
22 September 2014, 14:26 | #726 | ||
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Read changelog.
Quote:
There is no difference if m68k is stopped. Quote:
Emulated hardware won't have any bandwidth restrictions but you need to patch existing drivers to allow selection of higher modes that original hardware does not support. |
||
22 September 2014, 14:52 | #727 |
PSPUAE DEV
|
Open the config in notepad and edit it manually.
Will edit below text later at home. 32 bits "classic" PowerPC */ /* PowerPC MPC603 microcontrollers */ { "MPC8240", "603" }, { "MPC52xx", "MPC5200" }, { "MPC5200", "MPC5200_v12" }, { "MPC5200B", "MPC5200B_v21" }, { "MPC82xx", "MPC8280" }, { "PowerQUICC-II", "MPC82xx" }, { "MPC8241", "G2HiP4" }, { "MPC8245", "G2HiP4" }, { "MPC8247", "G2leGP3" }, { "MPC8248", "G2leGP3" }, { "MPC8250", "MPC8250_HiP4" }, { "MPC8250_HiP3", "G2HiP3" }, { "MPC8250_HiP4", "G2HiP4" }, { "MPC8255", "MPC8255_HiP4" }, { "MPC8255_HiP3", "G2HiP3" }, { "MPC8255_HiP4", "G2HiP4" }, { "MPC8260", "MPC8260_HiP4" }, { "MPC8260_HiP3", "G2HiP3" }, { "MPC8260_HiP4", "G2HiP4" }, { "MPC8264", "MPC8264_HiP4" }, { "MPC8264_HiP3", "G2HiP3" }, { "MPC8264_HiP4", "G2HiP4" }, { "MPC8265", "MPC8265_HiP4" }, { "MPC8265_HiP3", "G2HiP3" }, { "MPC8265_HiP4", "G2HiP4" }, { "MPC8266", "MPC8266_HiP4" }, { "MPC8266_HiP3", "G2HiP3" }, { "MPC8266_HiP4", "G2HiP4" }, { "MPC8270", "G2leGP3" }, { "MPC8271", "G2leGP3" }, { "MPC8272", "G2leGP3" }, { "MPC8275", "G2leGP3" }, { "MPC8280", "G2leGP3" }, { "e200", "e200z6" }, { "e300", "e300c3" }, { "MPC8347", "MPC8347T" }, { "MPC8347A", "MPC8347AT" }, { "MPC8347E", "MPC8347ET" }, { "MPC8347EA", "MPC8347EAT" }, { "e500", "e500v2_v22" }, { "e500v1", "e500_v20" }, { "e500v2", "e500v2_v22" }, { "MPC8533", "MPC8533_v11" }, { "MPC8533E", "MPC8533E_v11" }, { "MPC8540", "MPC8540_v21" }, { "MPC8541", "MPC8541_v11" }, { "MPC8541E", "MPC8541E_v11" }, { "MPC8543", "MPC8543_v21" }, { "MPC8543E", "MPC8543E_v21" }, { "MPC8544", "MPC8544_v11" }, { "MPC8544E", "MPC8544E_v11" }, { "MPC8545", "MPC8545_v21" }, { "MPC8545E", "MPC8545E_v21" }, { "MPC8547E", "MPC8547E_v21" }, { "MPC8548", "MPC8548_v21" }, { "MPC8548E", "MPC8548E_v21" }, { "MPC8555", "MPC8555_v11" }, { "MPC8555E", "MPC8555E_v11" }, { "MPC8560", "MPC8560_v21" }, { "601", "601_v2" }, { "601v", "601_v2" }, { "Vanilla", "603" }, { "603e", "603e_v4.1" }, { "Stretch", "603e" }, { "Vaillant", "603e7v" }, { "603r", "603e7t" }, { "Goldeneye", "603r" }, { "604e", "604e_v2.4" }, { "Sirocco", "604e" }, { "Mach5", "604r" }, { "740", "740_v3.1" }, { "Arthur", "740" }, { "750", "750_v3.1" }, { "Typhoon", "750" }, { "G3", "750" }, { "Conan/Doyle", "750p" }, { "750cl", "750cl_v2.0" }, { "750cx", "750cx_v2.2" }, { "750cxe", "750cxe_v3.1b" }, { "750fx", "750fx_v2.3" }, { "750gx", "750gx_v1.2" }, { "750l", "750l_v3.2" }, { "LoneStar", "750l" }, { "745", "745_v2.8" }, { "755", "755_v2.8" }, { "Goldfinger", "755" }, { "7400", "7400_v2.9" }, { "Max", "7400" }, { "G4", "7400" }, { "7410", "7410_v1.4" }, { "Nitro", "7410" }, { "7448", "7448_v2.1" }, { "7450", "7450_v2.1" }, { "Vger", "7450" }, { "7441", "7441_v2.3" }, { "7451", "7451_v2.3" }, { "7445", "7445_v3.2" }, { "7455", "7455_v3.2" }, { "Apollo6", "7455" }, { "7447", "7447_v1.2" }, { "7457", "7457_v1.2" }, { "Apollo7", "7457" }, { "7447A", "7447A_v1.2" }, { "7457A", "7457A_v1.2" }, { "Apollo7PM", "7457A_v1.0" }, |
22 September 2014, 16:27 | #728 |
Supernormal
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 43
Posts: 1,410
|
I'm having problems getting AmigaOS4.1 run without freezing (and bringing WinUAE down with it). I can not use F12 and I have to press ctrlaltdel to return to desktop.
After OS4.1 starts, I can use it for a couple of seconds (between 10 and 40), I tried checking screenmode prefs and managed to choose and save 1024x768 16bit. |
22 September 2014, 16:45 | #729 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Quote:
|
|
22 September 2014, 16:55 | #730 | |
Supernormal
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 43
Posts: 1,410
|
Quote:
This time it happened without me doing anything (I did not even move the mouse pointer) |
|
22 September 2014, 17:01 | #731 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
|
22 September 2014, 17:20 | #732 |
Supernormal
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 43
Posts: 1,410
|
|
22 September 2014, 17:48 | #733 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
|
22 September 2014, 18:58 | #734 |
PSPUAE DEV
|
You talking about rainbow strips? if so, then its an OS4.1 thing with certain GFX setups.
|
22 September 2014, 19:25 | #735 |
Banned
Join Date: Feb 2013
Location: spain
Posts: 897
|
where is the quemu library for winuae b17 ??????
I downloaded the one here http://eab.abime.net/showthread.php?t=75062 but not works when I run some ppc programs says "ppc loading quemu library" I click ok then the ppc program works but no jit accel |
22 September 2014, 19:49 | #736 | |
PSPUAE DEV
|
Quote:
|
|
22 September 2014, 19:49 | #737 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Display related crash seems to be caused by invalid sized cirrus logic chip blit that crosses end of VRAM which is not checked because original qemu checks are broken, they rejected many types of valid blits. Looks like better check is needed..
Quote:
|
|
22 September 2014, 20:00 | #738 |
Registered User
Join Date: Aug 2014
Location: Germany
Posts: 58
|
I encountering several freezes in the OS 4.0 environment since switch to b17.
I can access settings with F12 without any problem and I can restart WinUAE. I used to configure the emu starting clean with Amiga 4000 profile and setting the known options. Any ideas? |
22 September 2014, 20:17 | #739 | |
Supernormal
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 43
Posts: 1,410
|
Quote:
|
|
22 September 2014, 20:18 | #740 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Do I really have to remind again that "not working" "reports" ARE NOT ALLOWED!
EDIT: It is very important to include everything possible (config, logs all) because I won't do any PPC debugging, especially OS4! Last edited by Toni Wilen; 22 September 2014 at 20:24. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE 2.6.1 beta series | Toni Wilen | support.WinUAE | 21 | 19 June 2013 11:54 |
WinUAE 2.3.3 beta series | Toni Wilen | support.WinUAE | 124 | 17 September 2011 15:48 |
WinUAE 1.6.1 beta series | Toni Wilen | support.WinUAE | 54 | 18 June 2009 11:05 |
WinUAE 1.5.1 beta series | Toni Wilen | support.WinUAE | 242 | 12 August 2008 12:42 |
WinUAE 1.5.0 beta series | Toni Wilen | support.WinUAE | 453 | 19 June 2008 09:05 |
|
|