ScanJuggler NEWS - scandoubler (and flickerfixer) for A1200/A4000 - Page 6

CrashMidnick · 25 November 2013, 13:57

Not too bad

Lord Aga · 25 November 2013, 14:47

Looks really good

What about display ratios (16:10 and 16:9) ? Can you centre the pic on a wide monitor or will it be squashed on full screen

seb132 · 25 November 2013, 14:56

Very clean! :thumbup:

Nostromo · 25 November 2013, 19:51

Does it output at 50hz or it forces everything @60hz like the Indivision?

Mohican · 25 November 2013, 20:11

@Lord Aga
The Rev.3 is designed in order to make it possible. Couldn't test it yet, though.

@Nostromo
It's now outputting the same Hz as the input. It has an FRC (frame-rate conversion) feature, as well, but it is not fully implemented yet.

@all
We can try to make some test with CRT and LCT TFT monitors (I hope) in this week, so we will back the results.

NovaCoder · 25 November 2013, 22:37

Cool, looks sharp

dJOS · 25 November 2013, 22:47

Does the scanjuggler output @ 75hz for normal Amiga modes seeing as most LCD's don't support 50hz?

Mohican · 25 November 2013, 23:50

Many LCD's support 50Hz (even if the specs say >56Hz or so), of course not with 15,6kHz HSync (PAL), but 31kHz.
Otherways, please look at the answer given to Nostromo above.

Lord Aga · 26 November 2013, 00:50

Quote:

Originally Posted by Mohican

@Lord Aga
The Rev.3 is designed in order to make it possible. Couldn't test it yet, though.

@Nostromo
It's now outputting the same Hz as the input. It has an FRC (frame-rate conversion) feature, as well, but it is not fully implemented yet.

@all
We can try to make some test with CRT and LCT TFT monitors (I hope) in this week, so we will back the results.

Cool

Let us know as soon as you can please

Retrofan · 26 November 2013, 03:09

Quote:

Originally Posted by Mohican

@all
We can try to make some test with CRT and LCT TFT monitors (I hope) in this week, so we will back the results.

What I know for what I've seen from another scandoubler is that that's the hardest part: to make it to work with all the posible monitors/Tv's (not solved there). What I can say is that I don't mind to wait -I mean, it doesn't have to be these Christmas- as long as this will be the best possible product.

I will understand perfectly anyway if it doesn't give full screens in all of them, and I don't mind an small black bar on it's borders; even WinUAE has got it sometimes.

Exit · 14 December 2013, 16:14

does it have rtg capabilities?

Nostromo · 14 December 2013, 17:10

I'd love to have a Picasso on Fpga!

seb132 · 16 December 2013, 12:05

Hope it will happen for Xmas...

What about the people who sent payments for pre-orders nearly a year ago ? Can we still send pre-orders, by the way ???

There is a SCANJUGGLER for sale on AmiBay today... looks like a rev.1 though... /me wonder where this one come from...

Machico2012 · 16 December 2013, 20:11

Waiting patiently....

Mohican · 17 December 2013, 04:28

Close to finish

Mohican · 17 December 2013, 04:29

and more ...

Nostromo · 17 December 2013, 08:05

Where can I get a CF adapter like you have there? Thanks.

CrashMidnick · 17 December 2013, 09:34

Thanks for your pictures Mohican, I already love this little piece of hardware

Nostromo · 17 December 2013, 10:17

Do you get flickering if you use Hi-Res?

Also, is output DVI-I (analogue) or DVD-D (digital)?

Mohican · 17 December 2013, 14:23

Comments on the pictures:
1. Connection to the monitor was DVI(-D) here.
2. The cable on the pictures is of course a test-cable only.
4. The image is very clean and crisp, as it should be. (Noise on the pictures is the camera only.)
5. It worked with all motherboards we tested (1D1, 1D4, 2B). (Last time it didn't work with 1D4, it needed to be fixed.)
6. The HDD cradle, when used, is functioning as a heat-spreader. (It's not neccessary, though, it works all day without it, as well.)

The card is under production now, along with the Switcher Module. 25 pcs for a start.
With a little luck a few sets could be sent out even before Christmas.

17 December 2013, 04:28	#115
Mohican Registered User Join Date: Nov 2009 Location: Budapest / Hungary Age: 50 Posts: 67	Close to finish Attached Thumbnails

17 December 2013, 04:29	#116
Mohican Registered User Join Date: Nov 2009 Location: Budapest / Hungary Age: 50 Posts: 67	and more ... Attached Thumbnails

17 December 2013, 10:17	#119
Nostromo Registered User Join Date: Dec 2008 Location: The World! Posts: 454	Do you get flickering if you use Hi-Res? Also, is output DVI-I (analogue) or DVD-D (digital)? Last edited by Nostromo; 17 December 2013 at 11:12.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where can I buy a flickerfixer/scandoubler?	mange_lars	support.Hardware	5	28 September 2010 08:36
ScanDoubler + FlickerFixer	Test Driver	MarketPlace	6	15 September 2009 00:23
FS: DCE Scandoubler/FlickerFixer for A1200	Gavilan	MarketPlace	2	23 August 2009 22:09
Scandoubler / Flickerfixer Production?	Penemy	Amiga scene	48	21 February 2007 10:18
Internal Flickerfixer Flickermagic scandoubler A1200/A4000	Effy	MarketPlace	12	09 December 2005 15:18

25 November 2013, 13:57	#101
CrashMidnick Registered User Join Date: Jun 2010 Location: FRANCE Posts: 222	Not too bad

25 November 2013, 14:47	#102
Lord Aga MI clan prevails Join Date: Jul 2010 Location: Belgrade, Serbia Posts: 1,443	Looks really good What about display ratios (16:10 and 16:9) ? Can you centre the pic on a wide monitor or will it be squashed on full screen

25 November 2013, 14:56	#103
seb132 French in Australia Join Date: May 2012 Location: Gold Coast Age: 52 Posts: 507	Very clean! :thumbup:

25 November 2013, 19:51	#104
Nostromo Registered User Join Date: Dec 2008 Location: The World! Posts: 454	Does it output at 50hz or it forces everything @60hz like the Indivision?

25 November 2013, 20:11	#105
Mohican Registered User Join Date: Nov 2009 Location: Budapest / Hungary Age: 50 Posts: 67	@Lord Aga The Rev.3 is designed in order to make it possible. Couldn't test it yet, though. @Nostromo It's now outputting the same Hz as the input. It has an FRC (frame-rate conversion) feature, as well, but it is not fully implemented yet. @all We can try to make some test with CRT and LCT TFT monitors (I hope) in this week, so we will back the results.

25 November 2013, 22:37	#106
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,400	Cool, looks sharp

25 November 2013, 22:47	#107
dJOS Registered User Join Date: Aug 2012 Location: Melbourne, Australia Posts: 888	Does the scanjuggler output @ 75hz for normal Amiga modes seeing as most LCD's don't support 50hz?

25 November 2013, 23:50	#108
Mohican Registered User Join Date: Nov 2009 Location: Budapest / Hungary Age: 50 Posts: 67	Many LCD's support 50Hz (even if the specs say >56Hz or so), of course not with 15,6kHz HSync (PAL), but 31kHz. Otherways, please look at the answer given to Nostromo above.

14 December 2013, 16:14	#111
Exit Registered User Join Date: Aug 2007 Location: Holland/The netherlands Age: 49 Posts: 122	does it have rtg capabilities?

14 December 2013, 17:10	#112
Nostromo Registered User Join Date: Dec 2008 Location: The World! Posts: 454	I'd love to have a Picasso on Fpga!

16 December 2013, 12:05	#113
seb132 French in Australia Join Date: May 2012 Location: Gold Coast Age: 52 Posts: 507	Hope it will happen for Xmas... What about the people who sent payments for pre-orders nearly a year ago ? Can we still send pre-orders, by the way ??? There is a SCANJUGGLER for sale on AmiBay today... looks like a rev.1 though... /me wonder where this one come from...

16 December 2013, 20:11	#114
Machico2012 Registered User Join Date: Apr 2013 Location: Madeira Posts: 24	Waiting patiently....

17 December 2013, 08:05	#117
Nostromo Registered User Join Date: Dec 2008 Location: The World! Posts: 454	Where can I get a CF adapter like you have there? Thanks.

17 December 2013, 09:34	#118
CrashMidnick Registered User Join Date: Jun 2010 Location: FRANCE Posts: 222	Thanks for your pictures Mohican, I already love this little piece of hardware

17 December 2013, 14:23	#120
Mohican Registered User Join Date: Nov 2009 Location: Budapest / Hungary Age: 50 Posts: 67	Comments on the pictures: 1. Connection to the monitor was DVI(-D) here. 2. The cable on the pictures is of course a test-cable only. 4. The image is very clean and crisp, as it should be. (Noise on the pictures is the camera only.) 5. It worked with all motherboards we tested (1D1, 1D4, 2B). (Last time it didn't work with 1D4, it needed to be fixed.) 6. The HDD cradle, when used, is functioning as a heat-spreader. (It's not neccessary, though, it works all day without it, as well.) The card is under production now, along with the Switcher Module. 25 pcs for a start. With a little luck a few sets could be sent out even before Christmas.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)