06 November 2008, 23:39 | #21 | |
Commodore Lover
Join Date: Nov 2008
Location: Italy
Age: 48
Posts: 128
|
Quote:
|
|
06 November 2008, 23:48 | #22 |
Amibay Senior Staff
Join Date: Feb 2008
Location: Cardiff / Wales
Posts: 1,302
|
Right I'm a little confused now,
Do you have 512K chip or 1MB chip with an 8372A OR an 8375 Megachip board running 2MB chipRAM ????? It's impossible to upgrade your Rev 6.2 Board from 512K to 1MB Chip either way by changing jumpers --- Tracks on the Motherboard need to be cut. If you are using an 8375 Megachip then you do not need to modify your board.. you Have 2MB ChipRAM, thats the maximum, also I think you will find that your "Green Screen" issues are due to the poor contact or fitting of the Megachip upgrade. TC |
06 November 2008, 23:56 | #23 | |
Commodore Lover
Join Date: Nov 2008
Location: Italy
Age: 48
Posts: 128
|
Quote:
Actually I'm operating with 8372A, I removed 8375 board. Before green screen and other troubles I operated with 2MB chip ram (with 8375) and 1MB chip ram with 8372A. After green screen Ir remopved 8375 and replaced 8372a Now I haven't 1MB but 512+512 but before with 8372A was 1MB chipram and 0 other mem. But moved jumpers to test the mainboard and not remember how to setup again they. I tried to move J101 from 1-2 to 2-3 but system is blank screen black. I will try again tomorrow... |
|
07 November 2008, 00:02 | #24 |
Amibay Senior Staff
Join Date: Feb 2008
Location: Cardiff / Wales
Posts: 1,302
|
Thanks for clarifying I understand now.
Your methods are very logical esp to remove the Megachip regarding the green screen. OK I will look into the 1MB chipRAM issue using my board tomorrow, something I've been meaning to do for a while anyway Let you know. TC |
07 November 2008, 00:08 | #25 | |
Commodore Lover
Join Date: Nov 2008
Location: Italy
Age: 48
Posts: 128
|
Quote:
|
|
07 November 2008, 21:59 | #26 |
Commodore Lover
Join Date: Nov 2008
Location: Italy
Age: 48
Posts: 128
|
I substituted all capacitors but the problem is the same, green screen!!! My last chance is to substitute the fat agnus chip... I ordered one in germany, hope to receive it shortly
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
amiga a2091 and gvp tekmagic - boot order issue amiga 2000 | MoreBITS | support.Hardware | 6 | 05 December 2011 20:26 |
Amiga 2000 extended RAM big problems! | genny | Hardware mods | 2 | 03 April 2011 14:19 |
Amiga 2000/3000 keybord problems | amiman99 | support.Hardware | 17 | 25 October 2009 20:03 |
Amiga 2000 Display & Work bench problems! | CalvinH | support.Hardware | 7 | 09 May 2009 04:39 |
Amiga 2000 and GVP SCSI problems... | polbit | support.Hardware | 16 | 11 January 2007 16:19 |
|
|