English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware > Hardware pics

 
 
Thread Tools
Old 04 March 2017, 21:41   #1
Vypr
Registered User

 
Join Date: Dec 2016
Location: East Kilbride
Posts: 31
A1200 Tower project - finally complete!

Ever since the first mediator was announced I've always wanted to put my old A1200 into a tower but never had the cash for it. Recently I got a decent job that paid enough for me to splash out a bit so I decided to make my passion a reality.

First Steps

First step was to work out what I needed.
I already had the following:
  • Amiga 1200 with Kickstart 3.1
  • M-Tech 1230/28 RTC with 8mb RAM and FPU
  • Indivision AGA MKIIcr
  • PCMCIA reset fix board. I'm not using PCMCIA cards but it was useful for the reset button.
  • Rhys MKII USB mouse adaptor
  • SCSI CD-ROM Drive
  • Realtek 8139 Fast Ethernet card
  • 700W ATX PSU

I procured the following parts:
From Amigakit
  • Mediator 1200TX board
  • Lyra 2 Keyboard adaptor

From eBay
  • ATX Case
  • Voodoo3 2000 PCI card
  • SoundBlaster Live CT4810
  • Adaptec 2940UW SCSI card
  • Radeon 9250 256Mb PCI video card (This was an afterthought, I had already bought the Voodoo card but I heard the Mediator could use the RAM as system memory (albeit a bit slower than normal RAM)

The Mediator and Voodoo card arrived first so I put the A1200 board on a bench and hooked them up to test.

First problem
The Mediator and the M-tech card were not compatible. The memory spaces conflicted, same as the PCMICA issue.

More money was spent and an ACA1233n card duly arrived.

Second problem
The ACA card and the Mediator had issues in OS3.9. Basically the whole system would freeze up on Workbench load, although oddly enough everything worked fine in OS3.1. eventually this got sorted. You can see the journey in this thread - http://eab.abime.net/showthread.php?t=85813

Next to arrive was the case and backplate. The backplate was slightly too big for the case, and the hole for the PSU was the wrong shape. I broke a dremel cutting the plate to size and making the PSU hole the right shape and size.
The backplate of the ATX case was removed and the new backplate riveted on.

Third problem
The hole for the PSU was located in such a position that it overhung the connector for the ATX plug on the mediator. With the PSU in place, it was putting pressure on the Power connector. This worried me a bit but everything worked. Also, the PCI backplate I had cut off the original backplate and riveted onto the new backplate was a couple of millimetres to far to the side so PCI cards were sitting at an angle.

However, they fit, the system powered on and I had a glorious 1280x720 Truecolour display.

Fourth Problem
I had pre-ordered the Lyra 2 keyboard adaptor from Amigakit but it since disappeared from the site, it was now in permanent TBA status.
Fortunately, on my sweep of eBay, I found a user selling an old Elbox Power Tower which had the old AT keyboard adaptor. Managed to sccop this up and dug out an old AT keyboard from my junk pile.
This was a relief as I was worried about the mechanical strain put on the components in my hacked together tower. having a purpose built tower was much better.
The Power Tower arrived and the old 120W ATX PSU was removed and thrown in the junk pile. The 700W ATX was transferred across and the power switch in the tower replaced.

Fifth Problem
The system would only boot up properly once in every five or six boots. The rest of the time it would hang at a black screen. After much disassembly and reassembly it was discovered the Radeon card was at issue. With the Radeon removed, every boot was perfect. Since the Radeon card was only used for extra memory and the ACA1233n came with 128Mb RAM, this was not an issue.

Pictures of the system:
External

Internal
Vypr is offline  
AdSense AdSense  
Old 04 March 2017, 23:03   #2
indigolemon
Bit Copying Bard

indigolemon's Avatar
 
Join Date: Jan 2017
Location: Kelty, Fife, Scotland
Age: 35
Posts: 197
That's excellent work man, I'm finding myself in an incredibly similar position at the moment and am building a stash ready for an incredibly similar plan to be put into effect

I've also got a power tower, and it's going rather yellow too. I found this site, and think I'm going to give it a go: https://www.vinyldye.co.uk/
indigolemon is offline  
Old 05 March 2017, 00:31   #3
Vypr
Registered User

 
Join Date: Dec 2016
Location: East Kilbride
Posts: 31
If you're going to put an ATX PSU in the case, I recommend getting some of this to hold the power switch in place.

https://www.amazon.co.uk/Multimorph-...ds=THERMOMORPH
Vypr is offline  
Old 05 March 2017, 01:11   #4
indigolemon
Bit Copying Bard

indigolemon's Avatar
 
Join Date: Jan 2017
Location: Kelty, Fife, Scotland
Age: 35
Posts: 197
That stuff looks great! Cheers
indigolemon is offline  
Old 19 March 2017, 20:48   #5
XsamX1987
Registered User

XsamX1987's Avatar
 
Join Date: Oct 2016
Location: Oxfordshire
Posts: 111
That is fantastic, a lot of hard work, great pics.
XsamX1987 is offline  
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
My 1st A1200 PC Mid Tower Project 2017 iowtheme Hardware mods 4 24 February 2017 20:28
Amiga A1200 Tower Project HELP iowtheme support.Hardware 1 15 January 2017 22:50
Project Amigall: My creation is complete! alkis21 Retrogaming General Discussion 9 12 August 2010 02:35
Akira's A1200 tower project Akira Hardware mods 4 19 April 2009 10:21
A1200 Tower project Heavyweight7t6 MarketPlace 7 29 May 2006 21:22

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 19:54.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Page generated in 0.18082 seconds with 12 queries