01 August 2004, 10:37 | #1 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
Screenmodes Explained
Just while I noticed the topic - nothing to do with SFS but with ClassicWB itself. I can get this working with no problems on WinUAE (using the HD from my Amiga) but if I try and use it on proper Amiga (using the same HD) then it doesn't unzip. Not sure why but it just jumps from the bit where it's looking for System.zip to the next stage.
It's crazy as really there is no reason why it should not work - the drives DH0: and has the system.zip on there (as obviously shown by using it in WinUAE and it works first time). Any ideas? Cheers, Macca. |
01 August 2004, 12:57 | #2 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
Another off topic question..
One other quick thing...
I am using a PC monitor from my real Amiga - I have now transferred the O/S to there but when it's in Super High Res Laced it flickers. I knock it to Super High Res (not laced) and the screen is smaller even at the same specifications (1280x256) anyone know how to get it to the same size as the icons don't look right... Many thanks, Macca |
01 August 2004, 22:40 | #3 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
The install problem I've covered in the other thread - possibly something to do with your maxtransfer/mask values in HDtoolbox or hardware related.
The ClassicWB comes in 2 default screenmodes:
TVs can’t display a 1:1 pixel ratio without flicker & hence being interlaced. Only PC monitors, special multisync displays and scan doublers allow such a ratio to be flicker free. In order to use ADV/ADVSP with a PC monitor, you have to drag monitor files out of the storage/monitors drawer into the devs/monitors drawer. For even better compatibility with PC monitors, a VGA file can be dragged over which increases frequencies slightly. The reason they are not there to start with is they take up memory, so are user choice depending on their setup. Once these files have been dragged over, screenmode prefs will present you with new display options like dbl-PAL and productivity. More info can be found by searching the net as to what files are needed. Problem is if you use a PC CRT monitor, you won’t be able to play games because they require a display capable of syncing down to a 15Khz TV display, something PC monitors don’t support (not sure about LCD limitations, never owned one). So unless you only plan on using workbench, a PC monitor is pretty useless. What’s needed for ClassicWB ADV/ADVSP is ideally a multisync monitor or a scan doubler. Another option is to run magictv as described in the readme files. This reduces flicker on 15KHz TV displays. You are limited to a 16 colour workbench however, so it won’t work as well with a 64/32 colour ADVSP or ADV+copperdemon addon. ADV with no addons is already 16 colour. Hope this helps. Can a mod please move these last three posts to the end of the Support and News Thread - Thanks! Last edited by Bloodwych; 02 August 2004 at 21:44. |
02 August 2004, 19:55 | #4 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
Thanks for the info - sorry to clutter up the wrong thread - doh!
Macca. |
02 August 2004, 21:19 | #5 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Hey no problem! Not practical always finding the right thread. I just hope you managed to make sense out of all that gibberish as I wrote it fairly late last night.
The only reason I want it moving is in case someone has a similar question. Saves me time in the future having posts in one place. Perhaps I'll go back through and make clearer..... |
02 August 2004, 23:17 | #6 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
Perhaps a sticky Classic Workbench troubleshooting thread is what's really required?
The gibberish did indeed make sense - however as the 8MB expansion thing is knackered at the moment (until I get more RAM to test it with) I'm using WinUAE to set everything up then I'll just transfer it back to the 'real' Amiga. It is a great little product and I encourage everyone to use it! (free plugs now as well!). Macca |
03 August 2004, 20:38 | #7 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Guess what's has happened Macca?
My own little sub forum with me as mod so I can sort out the posts myself. EDIT: Done! Thread split and renamed. Last edited by Bloodwych; 04 August 2004 at 21:00. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Screenmodes with WinUAE 2.3.3 | OldAmigaGuy42 | support.WinUAE | 3 | 04 March 2012 15:05 |
Amiga Demo Podcast Explained! :) | mihcael | Amiga websites reviews | 0 | 16 June 2010 08:53 |
Pivot screenmodes | rgen | support.WinUAE | 2 | 07 August 2007 15:09 |
WinUAE Final 1.3.4 problems screenmodes running FroggerNG | DaNi | support.WinUAE | 2 | 03 January 2007 13:37 |
extra screenmodes needed | backtoskooldaze | support.Hardware | 4 | 28 November 2002 16:18 |
|
|