14 September 2004, 15:54 | #1 |
Registered User
|
Guru!
Hi. I put my Amiga 3.5" HDD into my PC, and I'm trying to use WinUAE to repartition and reinstall workbench 3.0 on it (a fresh clean install) since I don't have any WB floppies, or any floppies at all. WinUAE boots, loading the install 3.0 disk, and I get a guru: adress: 8000 0004 error: 1001fc58.
Anyone know what's wrong? (please see the attached files) |
14 September 2004, 16:51 | #2 |
2nd era...
|
Can the emulated Amiga see the drive ok? (i.e. it appears in the Early Startup Control)
|
14 September 2004, 17:36 | #3 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
Does the guru (and "your Amiga program just did.."-message in log) disappear if you remove the harddrive?
|
14 September 2004, 17:59 | #4 | |
Registered User
|
Quote:
|
|
14 September 2004, 18:01 | #5 | |
Registered User
|
Quote:
It's strange, if i boot from the hdd without startup-sequence it still gurus. Could it be a virus? (weird, since I've only installed wb30, mui, mcp on it) |
|
14 September 2004, 18:38 | #6 |
2nd era...
|
Does the HD currently have a bootable WB installation on it?
|
14 September 2004, 19:43 | #7 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 6,985
|
You probably have installed a filesystem on the drive which is somehow incompatible with WinUAE or none at all. Disable all partitions in the Early-Startup menu, boot from the Install ADF and use HDToolbox to reinstall all file systems. Do not touch the partition borders or all data will be lost.
|
14 September 2004, 20:21 | #8 | |
Registered User
|
Quote:
(yes, it gurus whatever I boot with as long as the HDD is recognized by the Amiga) |
|
14 September 2004, 20:22 | #9 | |
Registered User
|
Quote:
|
|
14 September 2004, 21:08 | #10 |
Registered User
|
Oh and BTW the problem might be solved if I format the HDD, but if I don't do that from an Amiga the MBR/RDB will be overwritten, right? So WinUAE won't recognize the drive anymore, which is bad bad..
|
14 September 2004, 21:21 | #11 | ||
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 6,985
|
Quote:
Quote:
Why don't you use WinUAE to format it in Amiga format ? |
||
14 September 2004, 21:32 | #12 | |
Registered User
|
Quote:
Because if I start WinUAE with the HDD enabled I get gurus. :/ |
|
14 September 2004, 21:55 | #13 |
Registered User
|
D:
I have solved it I think. I formatted the HDD in WinXP, with FAT32, and used WinUAE (forced hdd detection) to repartition the drive (I got no gurus this time), which now has a 258mb large workbench: and a 1762mb large work:. Did the problem begin as I by mistake had a 1mb large partition in the beginning of the drive, or because something I installed (mcp)? I dunno... but I got gurus even with no startup-sequence.
Anyways, seems to work now. Thanks all! Keep up the good work Toni! |
15 September 2004, 02:18 | #14 |
Registered User
|
Haha. No joy. Damn I'm so screwed... I put back the HDD into my real 1200, 060, 32mb. It gurus. if i boot with no startup-sequence it boots, no guru at all. i renamed the user-startup to see if that was causing any troubles but no, wasn' that. then i tried commenting out the setpatch >nil; command and that helped a bit, it now boots into workbench and guru's after like 3 seconds. after that I tried uncommenting iprefs, and now boots wb but guru's after like 10 seconds. isn't this weird?
|
15 September 2004, 07:53 | #15 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 6,985
|
Do you have a 68060 accelerator in your Amiga ? Then you need to install a special 68040.library and the 68060.library. And SetPatch is needed.
|
15 September 2004, 15:36 | #16 | |
Registered User
|
Quote:
edit: yes the libs are there, now this morning i booted it up fine to workbench, then after 2 ´seconds i got a guru. the 68060 is cold enough...hm... The guru is always the same: Error: 8000 003D Task: 470848B0 If i hold the 2-key to disable the 060 the workbench runs for about 5 seconds then hangs. (this is on the real amiga) Last edited by Fackamato; 15 September 2004 at 15:45. |
|
15 September 2004, 22:40 | #17 |
2nd era...
|
Do you get gurus on your real Amiga if you boot off a floppy with the HD installed?
|
15 September 2004, 22:57 | #18 | |
Registered User
|
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Unknown Guru | shrub3056 | support.Hardware | 17 | 21 August 2011 00:17 |
Guru - It Just Gets Better | Loedown | support.Hardware | 13 | 09 April 2009 20:43 |
Guru | BippyM | Retrogaming General Discussion | 1 | 09 September 2006 19:03 |
New problem... GURU or something.. | BarrySWE | support.Hardware | 8 | 10 November 2005 21:18 |
Guru? | Dr. Dude | request.Apps | 2 | 29 January 2004 13:30 |
|
|