68030, 68040 and 68060 MMU support (really!) - Page 2

gilgamesh · 29 August 2009, 21:23

Installing Debian is still problematic. Slink runs in cricles after finding the serial port. Sarge will start promising, but then panic with an illegal instruction.

Just unpack the contents of amigainstall.tgz+base2_2.tgz or businesscard.iso in a directory, mount it as harddisk, run an A1200 with 2MB chip + 8MB fast and 68040 MMU, cd into amiga and execute StartInstall.

Retro1234 · 29 August 2009, 23:12

Quote:

Originally Posted by gilgamesh

Just unpack the contents of amigainstall.tgz+base2_2.tgz or businesscard.iso in a directory, mount it as harddisk, run an A1200 with 2MB chip + 8MB fast and 68040 MMU, cd into amiga and execute StartInstall.

More potato's

I'd like to check this out - Sorry for the silly question I cant find the files?

"Get all required files from one of Debian's FTP sites,
like ftp.debian.org, ftp.de.debian.org etc. A list of mirror sites
can be found at http://www.debian.org/distrib/ftplist

No matter what mirror site you use, the path should always be:
/pub/debian/dists/potato/main/disks-m68k/current

These are the files you need:
- amigainstall.tgz
- base2_2.tgz"

prowler · 29 August 2009, 23:20

Hi Boo Boo,

Try this page:
http://www.debian.org/mirror/list

gilgamesh · 29 August 2009, 23:21

See my post #18 for the necessary links. The older Slink comes as tarballs, while Sarge has ISOs.

Good luck.

EDIT: Slink, Sarge

prowler · 29 August 2009, 23:28

@Boo Boo,

This page has the files you want:
ftp://ftp.de.debian.org/archive/debi...19-2000-12-03/

Retro1234 · 29 August 2009, 23:29

Doh! Nope cant see them I happy to use tgz files
I dont want to mess up the thread - If anyone can up to the zone or direct links
Danke

prowler · 29 August 2009, 23:31

Direct links:
ftp://ftp.de.debian.org/archive/debi...igainstall.tgz
ftp://ftp.de.debian.org/archive/debi...03/base2_2.tgz

gilgamesh · 29 August 2009, 23:31

Oh, I see. Didn't know Potato was a Codename.

Retro1234 · 29 August 2009, 23:32

Prowler!
Thanks Dude - I couldnt see for looking

TCD · 29 August 2009, 23:33

So you got it working prowler?

prowler · 29 August 2009, 23:36

What, the direct linking or the Debian-M68k?

@Boo Boo,
I'm not called prowler for nothing!

TCD · 29 August 2009, 23:39

Debian-M68k of course

Since you give these hints I guess you have it working already?

prowler · 29 August 2009, 23:43

Well, I guess I ought to download it and have a look!

Hint: I found the files by FTP searching here.

Retro1234 · 29 August 2009, 23:43

First Sorry Toni for going off-topic

Quote:

Originally Posted by prowler

@Boo Boo,

I'm not called prowler for nothing!

Thanks Guys, I can see the Linux boot screen as above CooL!

TCD · 29 August 2009, 23:45

Quote:

Originally Posted by prowler

Well, I guess I ought to download it and have a look!

Yep

gilgamesh · 29 August 2009, 23:49

Quote:

Originally Posted by Boo Boo

Thanks Guys, I can see the Linux boot screen as above CooL!

But what do you see after? Can you install it?

Retro1234 · 29 August 2009, 23:56

Quote:

Originally Posted by gilgamesh

But what do you see after? Can you install it?

No no just the same as you, i'm just curious about both Linux68k and the new MMU feature and wanted to mess about - see what Toni Says

prowler · 30 August 2009, 00:20

Quote:

Originally Posted by TheCyberDruid

Quote:

Originally Posted by prowler

Well, I guess I ought to download it and have a look!

Yep

Okay, I've downloaded the files.

Hey, I just had a look at the installation instructions.

All this Linux stuff is new to me.

This could take some time...

Toni Wilen · 30 August 2009, 10:06

Quote:

Originally Posted by Boo Boo

No no just the same as you, i'm just curious about both Linux68k and the new MMU feature and wanted to mess about - see what Toni Says

Use A1200 or A4000 like configuration (IDE). Your screenshot shows A3000 SCSI used without being enabled (and it does not work very well even if you enable it)

Toni Wilen · 30 August 2009, 10:57

http://www.winuae.net/files/b/winuae.zip should fix Linux HyperCOM serial board detection, also includes mulib mmu fix. (WD SCSI still not fixed)

This wasn't as pointless as I originally thought, this will help me to make SCSI emulation more compatible

29 August 2009, 21:23	#21
gilgamesh Linux snob Join Date: Sep 2008 Location: Monkey Island Posts: 997	Installing Debian is still problematic. Slink runs in cricles after finding the serial port. Sarge will start promising, but then panic with an illegal instruction. Just unpack the contents of amigainstall.tgz+base2_2.tgz or businesscard.iso in a directory, mount it as harddisk, run an A1200 with 2MB chip + 8MB fast and 68040 MMU, cd into amiga and execute StartInstall. Attached Thumbnails Last edited by gilgamesh; 29 August 2009 at 21:29.

29 August 2009, 23:21	#24
gilgamesh Linux snob Join Date: Sep 2008 Location: Monkey Island Posts: 997	See my post #18 for the necessary links. The older Slink comes as tarballs, while Sarge has ISOs. Good luck. EDIT: Slink, Sarge Last edited by gilgamesh; 29 August 2009 at 23:28.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
68040 vs 68060	tesla	support.Hardware	10	20 April 2013 19:13
68040 MMU jsr/bsr	Toni Wilen	Coders. General	5	28 April 2010 20:57
68060 fpu not available mmu not active	amigarlz	support.Hardware	6	18 March 2010 06:35
WTB: 68030 or 68040 accelerator for A2000	Shadowfire	MarketPlace	2	19 September 2009 17:52
68030/mmu Support in WinUAE	dkovacs	request.UAE Wishlist	19	22 August 2005 14:42

29 August 2009, 23:20	#23
prowler Global Moderator Join Date: Aug 2008 Location: Sidcup, England Posts: 10,300	Hi Boo Boo, Try this page: http://www.debian.org/mirror/list

29 August 2009, 23:28	#25
prowler Global Moderator Join Date: Aug 2008 Location: Sidcup, England Posts: 10,300	@Boo Boo, This page has the files you want: ftp://ftp.de.debian.org/archive/debi...19-2000-12-03/

29 August 2009, 23:29	#26
Retro1234 Phone Homer Join Date: Jun 2006 Location: 5150 Posts: 5,773	Doh! Nope cant see them I happy to use tgz files I dont want to mess up the thread - If anyone can up to the zone or direct links Danke

29 August 2009, 23:31	#27
prowler Global Moderator Join Date: Aug 2008 Location: Sidcup, England Posts: 10,300	Direct links: ftp://ftp.de.debian.org/archive/debi...igainstall.tgz ftp://ftp.de.debian.org/archive/debi...03/base2_2.tgz

29 August 2009, 23:32	#29
Retro1234 Phone Homer Join Date: Jun 2006 Location: 5150 Posts: 5,773	Prowler! Thanks Dude - I couldnt see for looking

29 August 2009, 23:33	#30
TCD HOL/FTP busy bee Join Date: Sep 2006 Location: Germany Age: 46 Posts: 31,518	So you got it working prowler?

29 August 2009, 23:36	#31
prowler Global Moderator Join Date: Aug 2008 Location: Sidcup, England Posts: 10,300	What, the direct linking or the Debian-M68k? @Boo Boo, I'm not called prowler for nothing!

29 August 2009, 23:39	#32
TCD HOL/FTP busy bee Join Date: Sep 2006 Location: Germany Age: 46 Posts: 31,518	Debian-M68k of course Since you give these hints I guess you have it working already?

29 August 2009, 23:43	#33
prowler Global Moderator Join Date: Aug 2008 Location: Sidcup, England Posts: 10,300	Well, I guess I ought to download it and have a look! Hint: I found the files by FTP searching here.

30 August 2009, 10:57	#40
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	http://www.winuae.net/files/b/winuae.zip should fix Linux HyperCOM serial board detection, also includes mulib mmu fix. (WD SCSI still not fixed) This wasn't as pointless as I originally thought, this will help me to make SCSI emulation more compatible

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)