Workbench 3.0/3.1 + Voodoo3

[Seiya]

i'd like to create a small workbench system with voodoo 3 card in few MB (maxium not more of 20 MB).
I don't remember the procedure to install Voodoo3, so what are step by step the procedure?

1)
2)
3)
4)
...
etc

[spudje]

Maybe this helps: https://github.com/Mediators/UnreliableGuide

[Seiya]

i forget to say: i need for WinUAE

[thomas]

Install the OS.
Install Picasso96 for Cybervision64/3D
copy pci.library to Libs: and Voodoo.card to Libs:Picasso96.
go to Devs/Monitors and rename CVision64 to Voodoo.
Open icon information of Voodoo and change tooltypes to BOARDTPYE=Voodoo.
Double click Voodoo.
Run Prefs/Picasso96Mode and create some Voodoo screen modes. Attach settings to Voodoo (that's in the right-click menu).
When you save settings it will ask you to reboot.
After the reboot run Prefs/Screenmode to select one of the new screen modes.

[Seiya]

very good, thank for this step by step guide
in prefs/picasso96 in attach board says: "no board" and every other panels is closed.

in WinAUE 4.10.1 is it necessary to use voodoo3.rom or it is already integrated?

edit:
if i setup again picasso96 install i change monitor to 31khz it found a unknown graphics board. i rename it in voodoo. But it continue to say that in Attach Board there is nothing.

[Aardvark]

Have you added PCI bridgeboard on WinUAE Expansions page?

[Seiya]

mmmh. no.
I had installed voodoo3 emulation many time ago and not more remember any step. i try again.

edit:
tried and works, but after loading workbench becaome all black screen. i remember that i shoudl press some keys to choose from PAL and 3dfx or something

[abu_the_monkey]

Originally Posted by Seiya

mmmh. no.
I had installed voodoo3 emulation many time ago and not more remember any step. i try again.

edit:
tried and works, but after loading workbench becaome all black screen. i remember that i shoudl press some keys to choose from PAL and 3dfx or something

to swap native to rtg screen 'end' + 'F9' ?

[Seiya]

Originally Posted by abu_the_monkey

to swap native to rtg screen 'end' + 'F9' ?

thank you

[Seiya]

installed in the end all ok, but when i try to launch every GL games i have HALT3 or crash on every software.
the config is A1200, 68040, 128 MB, no jit and Mediator A1200 driver
in 2D it is ok, no problem

[abu_the_monkey]

working fine in 4.9.1, can't get it to work in 4.10.0
Like you say the 2d stuff seems fine but 3d programs (while they don't crash or halt the emulator) do not open, I can see the memory being used but nothing is displayed.
you should probably ask in Support/WINUAE

[abu_the_monkey]

cybervision3D emulation is working with winuae 4.10 so don't know what changed to stop voodoo working

[Seiya]

i resolved: WinUAE 4.10.1 with A4000 + MEdiator A4000 MK2 in OS3.9. Voodoo3 run good also with Warp3D.

[abu_the_monkey]

strange, I have a very similar setup but it will not open warp3d stuff in 4.10.

could you post your config so I can compare?

[Seiya]

config_description=UAE default configuration
config_hardware=true
config_host=true
config_version=4.10.1
config_hardware_path=
config_host_path=
config_all_path=
win32.rom_path=./
win32.floppy_path=./
win32.hardfile_path=./
; host-specific
win32.middle_mouse=true
win32.map_cd_drives=true
win32.rtg_match_depth=false
win32.soundcard=0
win32.soundcardname=WASAPI:Default Audio Device
; common
use_gui=no
use_debugger=false
kickstart_rom_file=..\..\..\Commodore Amiga\Scripts\Kick31-4068.rom
kickstart_rom_file_id=D6BAE334,KS ROM v3.1 (A4000)
kickstart_ext_rom_file=
kickstart_rom=v3.1
vooodoo3_3k_rom_file=.\voodoo3.rom
mediator_rom_file=.\ENABLED
mediator_rom_options=subtype=4000mkii
ide_mb_rom_file=:ENABLED
flash_file=
cart_file=
rtc_file=
kickshifter=false
scsidevice_disable=false
floppy_volume=33
floppy0=
floppy1=
floppy2=
floppy2type=0
floppy3=
floppy3type=0
cdimage0=f:\emul\gamebase\commodore amiga\extras\extra2\0.adf,delay:
nr_floppies=4
floppy_speed=100
cd_speed=100
parallel_on_demand=false
serial_on_demand=false
serial_hardware_ctsrts=true
serial_direct=false
scsi=true
uaeserial=false
sana2=false
sound_output=exact
sound_channels=stereo
sound_stereo_separation=7
sound_stereo_mixing_delay=0
sound_max_buff=16384
sound_frequency=44100
sound_interpol=anti
sound_filter=emulated
sound_filter_type=standard
sound_volume=0
sound_volume_paula=0
sound_volume_cd=0
sound_volume_ahi=0
sound_volume_midi=0
sound_volume_genlock=0
sound_auto=true
sound_stereo_swap_paula=false
sound_stereo_swap_ahi=false
comp_trustbyte=direct
comp_trustword=direct
comp_trustlong=direct
comp_trustnaddr=direct
comp_nf=true
comp_constjump=true
comp_flushmode=soft
compfpu=false
comp_catchfault=true
cachesize=16384
joyport0=mouse1
joyport0autofire=none
joyport0mode=cdtvjoy
joyportfriendlyname0=Mouse compatibile HID
joyportname0=\\?\HID#VID_093A&PID_2510#6&221d7f64&0&0000#{378de44c-56ef-11d1-bc8c-00a0c91405dd}
joyport1=joy0
joyport1autofire=none
joyport1mode=cd32joy
joyportfriendlyname1=XBOX 360 For Windows (Controller)
joyportname1=\\?\HID#VID_045E&PID_028E&IG_00#7&2fb4f87c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
bsdsocket_emu=false
synchronize_clock=false
maprom=0xf000000
parallel_postscript_emulation=false
parallel_postscript_detection=false
ghostscript_parameters=
parallel_autoflush=5
gfx_display=0
gfx_display_rtg=0
gfx_framerate=1
gfx_width=800
gfx_height=600
gfx_x_windowed=318
gfx_y_windowed=73
gfx_width_windowed=800
gfx_height_windowed=600
gfx_width_fullscreen=native
gfx_height_fullscreen=native
gfx_refreshrate=0
gfx_autoresolution=0
gfx_autoresolution_vga=true
gfx_backbuffers=2
gfx_backbuffers_rtg=1
gfx_vsync=false
gfx_vsyncmode=normal
gfx_vsync_picasso=false
gfx_vsyncmode_picasso=normal
gfx_lores=false
gfx_resolution=hires
gfx_lores_mode=normal
gfx_flickerfixer=false
gfx_linemode=double
gfx_fullscreen_amiga=false
gfx_fullscreen_picasso=false
gfx_center_horizontal=none
gfx_center_vertical=none
gfx_colour_mode=32bit
gfx_blacker_than_black=false
gfx_api=direct3d
gfx_api_options=hardware
immediate_blits=false
ntsc=false
genlock=false
chipset=aga
chipset_refreshrate=59.280403
collision_level=playfields
chipset_compatible=A4000
ksmirror_e0=false
fatgary=0
ramsey=15
z3_autoconfig=true
unmapped_address_space=zero
eclocksync=Gayle
ide=a4000
fastmem_size=0
debugmem_start=0x0
debugmem_size=0
mem25bit_size=0
a3000mem_size=0
mbresmem_size=0
z3mem_size=128
z3mem_start=0x40000000
bogomem_size=0
gfxcard_hardware_vblank=false
gfxcard_hardware_sprite=false
gfxcard_multithread=false
gfxcard_size=16
gfxcard_type=V3_3000
chipmem_size=4
cpu_speed=max
cpu_throttle=0.0
cpu_type=68040
cpu_model=68040
fpu_model=68040
cpu_compatible=false
cpu_24bit_addressing=false
cpu_data_cache=false
cpu_cycle_exact=false
cpu_memory_cycle_exact=false
blitter_cycle_exact=false
cycle_exact=false
fpu_strict=false
rtg_nocustom=true
rtg_modes=0x212
debug_mem=false
log_illegal_mem=false
kbd_lang=us

[abu_the_monkey]

@Seiya

Thanks, I will try this later

[AMIGASYSTEM]

@Seiya

I noticed that you configured an A4000, but you used a "Generic ChipSet" instead of the A4000 ChipSet.

To configure an A4000, you can do it correctly by choosing the 4000 from the QuickStart, this is important if you want an authentic A4000.

[Seiya]

if you read better, it's written A4000 chipset

[AMIGASYSTEM]

Seiya I went through the config you attached, you don't have to read the script, but you have to see it from the GUI, if you run the config you attached you will see in the ChipSet section "Generic", see screenshot !