English Amiga Board


Go Back   English Amiga Board > Support > support.WinUAE

 
 
Thread Tools
Old 11 July 2018, 12:16   #41
hexaae
Registered User
hexaae's Avatar
 
Join Date: Jul 2006
Location: Italy
Age: 42
Posts: 1,109
Has been introduced with 4.0.0 public release. Worked fine re-editing those HDF + fs paths and starting emu, up to 3.6.1.
hexaae is offline  
Old 11 July 2018, 14:25   #42
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 21,796
Quote:
Originally Posted by hexaae View Post
Has been introduced with 4.0.0 public release. Worked fine re-editing those HDF + fs paths and starting emu, up to 3.6.1.
I couldn't duplicate it but I noticed changed path was not stored if dialog was exited with return key but that was very old bug..
Toni Wilen is offline  
Old 11 July 2018, 15:24   #43
hexaae
Registered User
hexaae's Avatar
 
Join Date: Jul 2006
Location: Italy
Age: 42
Posts: 1,109
I can reproduce it always here, even clicking OK button to dismiss HDF setup (not Return key).
Attached my cfg, maybe there is something specific in this cfg: https://nofile.io/f/PwvP3xP3bP4/Beta...triple+060.uae
(maybe it also requires to find the specified HDFs on 1st cfg loading or the bug won' t show up?).
My repro steps are:
  • start WinUAE
  • select cfg and click Load
  • edit in the CD/HD panel my dh0 and dh1 switching to the other HDFs (mirrored HDF PFS3) and manually editing the string gadgets for HDF path and FS path, then click OK
at this point if I start emulation I have "Not a DOS Disk error" and if I use F12 I see the hdf + fs are correct, even if it's not the case (internally WinUAE seems to still use .\ROMS\SmartFileSystem for those HDFs, even if GUI looks right). To make it work I have to Remove the 2 hd and re-add them from scratch.
hexaae is offline  
Old 11 July 2018, 16:53   #44
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 21,796
Quote:
Originally Posted by hexaae View Post
(internally WinUAE seems to still use .\ROMS\SmartFileSystem for those HDFs, even if GUI looks right)
Check the log to confirm this. Path is logged during mounting.
Toni Wilen is offline  
Old 11 July 2018, 17:15   #45
hexaae
Registered User
hexaae's Avatar
 
Join Date: Jul 2006
Location: Italy
Age: 42
Posts: 1,109
Log file while following above steps up to Not a DOS disk error when starting emu: https://nofile.io/f/tpdRr2eN0ev/winuaebootlog_pfs3.7z
hexaae is offline  
Old 11 July 2018, 17:32   #46
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 21,796
Quote:
Originally Posted by hexaae View Post
Log file while following above steps up to Not a DOS disk error when starting emu: https://nofile.io/f/tpdRr2eN0ev/winuaebootlog_pfs3.7z
Did you really change filesystem path (or hardfiles in general) when emulation is already running? Thats not fully supported, part of changes may get applied but not all..
(or for some other reason your log has multiple "sessions")
Toni Wilen is offline  
Old 11 July 2018, 17:47   #47
hexaae
Registered User
hexaae's Avatar
 
Join Date: Jul 2006
Location: Italy
Age: 42
Posts: 1,109
No, I followed exactly the steps mentioned above:
  • I launched WinUAE with log
  • Loaded the cfg listed here clicking the Load button at the bottom:
  • Edited manually the CD/HD paths
  • Clicked on Start button to launch emulation…. Not a DOS Disk error!
hexaae is offline  
Old 11 July 2018, 18:34   #48
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 21,796
Then the log is wrong. It has huge amount of lines, for example system has been reset 181 times in this log! ** RESTART ** 2 times (=RESTART button was pressed. Never do this when logging something unless debugging restart related problems)
Toni Wilen is offline  
Old 11 July 2018, 21:04   #49
hexaae
Registered User
hexaae's Avatar
 
Join Date: Jul 2006
Location: Italy
Age: 42
Posts: 1,109
b4 launched as "winuae.exe -log -logflush -scsilog -scsiemulog"
...There is something strange: it won't save logfile on exit when, after "Not a DOS Disk" I press F12 and quit from GUI. But I made a cut & paste of the log from opened window:
https://nofile.io/f/81dFXG95Gy1/winuaebootlog_pfs3.zip
another one forcing options to save full logfile despite given line command parameters…
https://nofile.io/f/3RbgHqbrVOB/winuaebootlog2.zip

Last edited by hexaae; 11 July 2018 at 21:10.
hexaae is offline  
Old 11 July 2018, 21:12   #50
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 21,796
Quote:
Originally Posted by hexaae View Post
b4 launched as "winuae.exe -log -logflush -scsilog -scsiemulog"
...There is something strange: it won't save logfile on exit when, after "Not a DOS Disk" I press F12 and quit from GUI. But I made a cut & paste of the log from opened window:
https://nofile.io/f/81dFXG95Gy1/winuaebootlog_pfs3.zip
another one forcing options to save full logfile despite given paramters…
https://nofile.io/f/3RbgHqbrVOB/winuaebootlog2.zip
Quote:
Log (disabled): 'D:\WinUAE\winuaelog.txt'
Hmm.. -log should always enable log file.

Anyway, log shows pfs3aio being used.

Boot normally, press shift+f12 to enter debugger. Type TO and press return, copy and paste the output. Then boot again when it shows not a dos disk and attach another TO output.

Quote:
Originally Posted by DamienD View Post
Unfortunately using this latest beta, WinUAE now takes an absolute age to start...
Does winuae.7z fix the slowdown?
Toni Wilen is offline  
Old 11 July 2018, 21:30   #51
hexaae
Registered User
hexaae's Avatar
 
Join Date: Jul 2006
Location: Italy
Age: 42
Posts: 1,109
TO from debugger, booted with PFS3aio (removing and re-adding HDFs)
Code:
403f515c: Type=3 Port=00000000 Lock=00000000 'Fusion'
403f4df4: Type=3 Port=00000000 Lock=00000000 'PCx'
403f4e74: Type=1 Port=4002e054 Lock=100fe577 'MUI'
403f77fc: Type=3 Port=00000000 Lock=00000000 'VMEM'
403f77ac: Type=3 Port=00000000 Lock=00000000 'Jpegtmp'
403f775c: Type=3 Port=00000000 Lock=00000000 'AWeb3'
403f770c: Type=3 Port=00000000 Lock=00000000 'AWebPath'
403e7a3c: Type=1 Port=4002e054 Lock=100fcbcf 'PGP'
403e7a0c: Type=3 Port=00000000 Lock=00000000 'FD'
403e79bc: Type=3 Port=00000000 Lock=00000000 'SAMPLES'
403e7964: Type=1 Port=4002e054 Lock=100fcba3 'TRASH'
403e7934: Type=0 Port=00000000 Lock=00000000 'CON'
 - H=403c1aa4 Stack=14096 Pri= 5 Start=00000000 Seg=40c93a4c GV=ffffffff
403e7abc: Type=0 Port=00000000 Lock=00000000 'RAW'
 - H=403c1acc Stack=14096 Pri= 5 Start=00000000 Seg=00000000 GV=ffffffff
40346e24: Type=0 Port=403471c0 Lock=00000000 'CD0'
 - H=402c9e1c Stack= 4096 Pri=10 Start=40346efc Seg=4035c24c GV=ffffffff
   uaescsi.device:0 100d1bc5
    TableSize       19
    SizeBlock       512
    SecOrg          0
    Surfaces        1
    SectorPerBlock  1
    BlocksPerTrack  1
    Reserved        0
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         350999 (Total 351000)
    NumBuffers      8
    BufMemType      0x00000001
    MaxTransfer     0xffffffff
    Mask            0xfffffffe
    BootPri         2
    DosType         0x43443031
402c9dec: Type=0 Port=00000000 Lock=00000000 'AWNPIPE'
 - H=402a291c Stack=10000 Pri= 5 Start=00000000 Seg=40347284 GV=ffffffff
402a2884: Type=0 Port=402c9f68 Lock=00000000 'ICD0'
 - H=400c85ac Stack= 3000 Pri=10 Start=402a2904 Seg=402e485c GV=ffffffff
   diskimage.device:4 100aa58b
    TableSize       19
    SizeBlock       512
    SecOrg          0
    Surfaces        1
    SectorPerBlock  1
    BlocksPerTrack  1
    Reserved        0
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         350999 (Total 351000)
    NumBuffers      64
    BufMemType      0x00000001
    MaxTransfer     0x01000000
    Mask            0x7ffffffe
    BootPri         2
    DosType         0x43443031
400c856c: Type=0 Port=00000000 Lock=00000000 'NULL'
 - H=402a27ec Stack=  500 Pri= 5 Start=00000000 Seg=00000000 GV=ffffffff
400c841c: Type=0 Port=402a109c Lock=00000000 'IDF0'
 - H=00000000 Stack= 4096 Pri= 5 Start=400c845c Seg=40083f60 GV=ffffffff
   diskimage.device:0 10032145
    TableSize       19
    SizeBlock       128
    SecOrg          0
    Surfaces        2
    SectorPerBlock  1
    BlocksPerTrack  11
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         79 (Total 80)
    NumBuffers      5
    BufMemType      0x00000001
    MaxTransfer     0x00200000
    Mask            0x7ffffffc
    BootPri         0
    DosType         0x444f5300
400c83d4: Type=0 Port=00000000 Lock=00000000 'PIPE'
 - H=4007458c Stack= 5000 Pri= 5 Start=00000000 Seg=4029f1d4 GV=ffffffff
40072d14: Type=0 Port=00000000 Lock=00000000 'SPEAK'
 - H=40074564 Stack= 6000 Pri= 5 Start=00000000 Seg=00000000 GV=ffffffff
40072cb4: Type=0 Port=00000000 Lock=00000000 'STDIO'
 - H=40072cec Stack= 1000 Pri= 5 Start=00000000 Seg=00000000 GV=ffffffff
40074374: Type=1 Port=4002e054 Lock=100fcb77 'HELP'
40074314: Type=1 Port=4002e054 Lock=1001d65b 'LOCALE'
400742e4: Type=1 Port=4002e054 Lock=1000c3f5 'KEYMAPS'
400742b4: Type=1 Port=4002e054 Lock=1000c3df 'PRINTERS'
40074284: Type=1 Port=4002e054 Lock=1000c3a9 'REXX'
40072d4c: Type=1 Port=400c9064 Lock=1006ab75 'CLIPS'
40072ab4: Type=1 Port=400c9064 Lock=1006e759 'T'
40072a84: Type=1 Port=400c9064 Lock=1003e98d 'ENV'
40072e94: Type=2 Port=400c9064 Lock=00000000 'RamDisk'
 - VolumeDate=000039d1 00000504 000000af LockList=00000000 DiskType=444f5300
4006fc14: Type=1 Port=4002e054 Lock=1000c373 'OS39'
40072c44: Type=1 Port=4002e054 Lock=1036c94f 'Workbench'
40072bdc: Type=3 Port=00000000 Lock=00000000 'DATA'
40072b8c: Type=3 Port=00000000 Lock=00000000 'REAGAN'
40072b3c: Type=1 Port=4004e76c Lock=10014753 'NIXON'
40072aec: Type=1 Port=4002e054 Lock=1001d6b3 'HDUAE'
40072804: Type=1 Port=4004e76c Lock=1001473d 'WORK'
4005f6e4: Type=2 Port=4004e76c Lock=00000000 'WorkPFS3'
 - VolumeDate=000039ce 00000157 000003e4 LockList=00000000 DiskType=50465301
4004e5a8: Type=2 Port=4004cd54 Lock=00000000 'MODS'
 - VolumeDate=00000eda 00000000 00000000 LockList=00000000 DiskType=444f5300
4004cb90: Type=2 Port=4004b33c Lock=00000000 'PICS'
 - VolumeDate=00000ed9 00000000 00000000 LockList=00000000 DiskType=444f5300
4004b178: Type=2 Port=40049924 Lock=00000000 'DOWNLOAD'
 - VolumeDate=00000ed8 00000000 00000000 LockList=00000000 DiskType=444f5300
400470e4: Type=1 Port=4002e054 Lock=1000c3c9 'ENVARC'
40047084: Type=1 Port=4002e054 Lock=1000c347 'SYS'
4002c864: Type=1 Port=4002e054 Lock=1000c331 'C'
4002c834: Type=1 Port=4002e054 Lock=1000c31b 'S'
4002c804: Type=1 Port=4002e054 Lock=1000c305 'LIBS'
4002c7d4: Type=1 Port=4002e054 Lock=1000c2ef 'DEVS'
4002c7a4: Type=1 Port=4002e054 Lock=1000c2d9 'FONTS'
4002c774: Type=1 Port=4002e054 Lock=1000c2c3 'L'
40002964: Type=2 Port=4002e054 Lock=00000000 'WorkbenchPFS3'
 - VolumeDate=000039ce 00000144 0000036e LockList=00000000 DiskType=50465301
4000290c: Type=0 Port=400c9064 Lock=00000000 'RAM'
 - H=00000000 Stack= 4000 Pri=10 Start=00000000 Seg=4002d27c GV=ffffffff
4000284c: Type=0 Port=00000000 Lock=00000000 'SER'
 - H=00fa78f0 Stack= 4000 Pri= 0 Start=00000000 Seg=00000000 GV=1000b3fb
4000280c: Type=0 Port=00000000 Lock=00000000 'PAR'
 - H=00fa78f0 Stack= 4000 Pri= 0 Start=00000004 Seg=00000000 GV=1000b3fb
400027dc: Type=0 Port=00000000 Lock=00000000 'PRT'
 - H=00fa78f0 Stack= 4000 Pri= 0 Start=00000008 Seg=00000000 GV=1000b3fb
4001c6b0: Type=0 Port=4002e054 Lock=00000000 'DH0'
 - H=00000000 Stack= 4000 Pri= 0 Start=4000dd18 Seg=4001c73c GV=ffffffff
   uaehf.device:3 100071b8
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        1
    SectorPerBlock  1
    BlocksPerTrack  32
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         19199 (Total 19200)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7fffffff
    Mask            0xffffffff
    BootPri         0
    DosType         0x50465301
4000d930: Type=0 Port=40047544 Lock=00000000 'DF0'
 - H=00000000 Stack=  600 Pri=10 Start=4000d95c Seg=40083f60 GV=00000000
   trackdisk.device:0 1000365b
    TableSize       19
    SizeBlock       128
    SecOrg          0
    Surfaces        2
    SectorPerBlock  1
    BlocksPerTrack  11
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         79 (Total 80)
    NumBuffers      5
    BufMemType      0x00000001
    MaxTransfer     0x00200000
    Mask            0x7ffffffe
    BootPri         5
    DosType         0x444f5300
4000dba0: Type=0 Port=40049924 Lock=00000000 'dl01'
 - H=00f0fe04 Stack= 6000 Pri=10 Start=4000dbd0 Seg=00f00008 GV=ffffffff
   uaehf.device:0 100036f8
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        64
    SectorPerBlock  1
    BlocksPerTrack  127
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          1
    HighCyl         230730 (Total 230730)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7ffffffe
    Mask            0xfffffffe
    BootPri         -128
    DosType         0x444f5300
4000dc78: Type=0 Port=4004b33c Lock=00000000 'pic0'
 - H=00f0fe04 Stack= 6000 Pri=10 Start=4000db80 Seg=00f00008 GV=ffffffff
   uaehf.device:1 1000372a
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        64
    SectorPerBlock  1
    BlocksPerTrack  127
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          1
    HighCyl         61026 (Total 61026)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7ffffffe
    Mask            0xfffffffe
    BootPri         -128
    DosType         0x444f5300
4000dd38: Type=0 Port=4004cd54 Lock=00000000 'mod0'
 - H=00f0fe04 Stack= 6000 Pri=10 Start=4000dc58 Seg=00f00008 GV=ffffffff
   uaehf.device:2 1000375a
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        64
    SectorPerBlock  1
    BlocksPerTrack  127
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          1
    HighCyl         61026 (Total 61026)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7ffffffe
    Mask            0xfffffffe
    BootPri         -128
    DosType         0x444f5300
4000dec0: Type=0 Port=4004e76c Lock=00000000 'DH1'
 - H=00000000 Stack= 4000 Pri=-128 Start=4000def0 Seg=4000df5c GV=ffffffff
   uaehf.device:4 100037c0
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        1
    SectorPerBlock  1
    BlocksPerTrack  32
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         127999 (Total 128000)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7fffffff
    Mask            0xffffffff
    BootPri         -128
    DosType         0x50465301
After manual editing paths and Not a DOS disk:
Code:
  D0 00000000   D1 001C96FF   D2 40000000   D3 00000000 
  D4 00000000   D5 00000000   D6 80000000   D7 C0000000 
  A0 400009C6   A1 4000918A   A2 00FE77E4   A3 400009CA 
  A4 00F814C4   A5 4000A196   A6 40000830   A7 400022A6 
USP  4000A1D8 ISP  400022A6 SFC  00000000 DFC  00000000 
CACR 0000A000 TC   00000000 ITT0 00FFC000 ITT1 00FFC000 
DTT0 0000C040 DTT1 00FFC000 BUSC 00000000 VBR  00000000 
URP  00000000 SRP  00000000 PCR  04300602 
T=00 S=1 M=0 X=0 N=0 Z=0 V=0 C=0 IMASK=0 STP=1
0: 0000-00000000-00000000 #0.000000e+00 0000-00000000-00000000 #0.000000e+00 
2: 0000-00000000-00000000 #0.000000e+00 0000-00000000-00000000 #0.000000e+00 
4: 0000-00000000-00000000 #0.000000e+00 0000-00000000-00000000 #0.000000e+00 
6: 0000-00000000-00000000 #0.000000e+00 0000-00000000-00000000 #0.000000e+00 
FPSR: 00000000 FPCR: 00000000 FPIAR: 00000000 N=0 Z=0 I=0 NAN=0
00F81476 60e6                     BT .B #$e6 == $00f8145e (T)
Next PC: 00f81478

TO
ROOTNODE: 4002ce2c DOSINFO: 40002a3c
40002c7c: Type=0 Port=00000000 Lock=00000000 'RAM'
 - H=00000000 Stack= 1200 Pri=10 Start=00000000 Seg=4002d1bc GV=ffffffff
40002c3c: Type=0 Port=00000000 Lock=00000000 'CON'
 - H=00000000 Stack= 3200 Pri= 5 Start=00000000 Seg=4002d188 GV=ffffffff
40002bfc: Type=0 Port=00000000 Lock=00000000 'RAW'
 - H=00000000 Stack= 3200 Pri= 5 Start=00000004 Seg=4002d188 GV=ffffffff
40002bbc: Type=0 Port=00000000 Lock=00000000 'SER'
 - H=00fa78f0 Stack=  800 Pri= 0 Start=00000000 Seg=00000000 GV=1000b3cb
40002b7c: Type=0 Port=00000000 Lock=00000000 'PAR'
 - H=00fa78f0 Stack=  800 Pri= 0 Start=00000004 Seg=00000000 GV=1000b3cb
40002b4c: Type=0 Port=00000000 Lock=00000000 'PRT'
 - H=00fa78f0 Stack= 1000 Pri= 0 Start=00000008 Seg=00000000 GV=1000b3cb
4001c5f0: Type=0 Port=4002df94 Lock=00000000 'DH0'
 - H=00000000 Stack= 4000 Pri= 0 Start=4000dc58 Seg=4001c67c GV=ffffffff
   uaehf.device:3 10007188
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        8
    SectorPerBlock  1
    BlocksPerTrack  63
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         1218 (Total 1219)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7fffffff
    Mask            0xffffffff
    BootPri         0
    DosType         0x50465301
4000d870: Type=0 Port=00000000 Lock=00000000 'DF0'
 - H=00000000 Stack=  600 Pri=10 Start=4000d89c Seg=00000000 GV=00000000
   trackdisk.device:0 1000362b
    TableSize       19
    SizeBlock       128
    SecOrg          0
    Surfaces        2
    SectorPerBlock  1
    BlocksPerTrack  11
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         79 (Total 80)
    NumBuffers      5
    BufMemType      0x00000001
    MaxTransfer     0x00200000
    Mask            0x7ffffffe
    BootPri         5
    DosType         0x444f5300
4000dae0: Type=0 Port=00000000 Lock=00000000 'dl01'
 - H=00f0fe04 Stack= 6000 Pri=10 Start=4000db10 Seg=00f00008 GV=ffffffff
   uaehf.device:0 100036c8
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        64
    SectorPerBlock  1
    BlocksPerTrack  127
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          1
    HighCyl         230730 (Total 230730)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7ffffffe
    Mask            0xfffffffe
    BootPri         -128
    DosType         0x444f5300
4000dbb8: Type=0 Port=00000000 Lock=00000000 'pic0'
 - H=00f0fe04 Stack= 6000 Pri=10 Start=4000dac0 Seg=00f00008 GV=ffffffff
   uaehf.device:1 100036fa
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        64
    SectorPerBlock  1
    BlocksPerTrack  127
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          1
    HighCyl         61026 (Total 61026)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7ffffffe
    Mask            0xfffffffe
    BootPri         -128
    DosType         0x444f5300
4000dc78: Type=0 Port=00000000 Lock=00000000 'mod0'
 - H=00f0fe04 Stack= 6000 Pri=10 Start=4000db98 Seg=00f00008 GV=ffffffff
   uaehf.device:2 1000372a
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        64
    SectorPerBlock  1
    BlocksPerTrack  127
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          1
    HighCyl         61026 (Total 61026)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7ffffffe
    Mask            0xfffffffe
    BootPri         -128
    DosType         0x444f5300
4000de00: Type=0 Port=00000000 Lock=00000000 'DH1'
 - H=00000000 Stack= 4000 Pri=-128 Start=4000de30 Seg=4000de9c GV=ffffffff
   uaehf.device:4 10003790
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        1
    SectorPerBlock  1
    BlocksPerTrack  32
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         127999 (Total 128000)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7fffffff
    Mask            0xffffffff
    BootPri         -128
    DosType         0x50465301
hexaae is offline  
Old 11 July 2018, 21:35   #52
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 21,796
Code:
   uaehf.device:3 100071b8
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        1
    SectorPerBlock  1
    BlocksPerTrack  32
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         19199 (Total 19200)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7fffffff
    Mask            0xffffffff
    BootPri         0
    DosType         0x50465301
    
   uaehf.device:3 10007188
    TableSize       16
    SizeBlock       128
    SecOrg          0
    Surfaces        8
    SectorPerBlock  1
    BlocksPerTrack  63
    Reserved        2
    PreAlloc        0
    Interleave      0
    LowCyl          0
    HighCyl         1218 (Total 1219)
    NumBuffers      50
    BufMemType      0x00000001
    MaxTransfer     0x7fffffff
    Mask            0xffffffff
    BootPri         0
    DosType         0x50465301
Geometry is different. It looks like geometry (surfaces 1<>8 and sectors 32<>63, which then makes total number of cylinders very different) resets to defaults?

Does GUI still show correct geometry values or do they change?
Toni Wilen is offline  
Old 11 July 2018, 22:42   #53
hexaae
Registered User
hexaae's Avatar
 
Join Date: Jul 2006
Location: Italy
Age: 42
Posts: 1,109
This is what I see after manually editing dh0: before I press OK,

...and here is it after boot attempt:


EDIT:
Worth mentioning: if I save the same config with PFS3 HDFs (generated loading SFS cfg, removing SFS HDFs, and then re-adding from scratch PFS3 HDFs), and try the opposite (= start WinUAE, Load PFS3 cfg, PFS3 -> manually changed to SFS) I can't reproduce No disk in DH0! Seems to happen only if I start from SFS cfg.

Last edited by hexaae; 12 July 2018 at 01:22.
hexaae is offline  
Old 11 July 2018, 22:50   #54
DamienD
Global Moderator

DamienD's Avatar
 
Join Date: Aug 2005
Location: London / Sydney
Age: 41
Posts: 12,180
Quote:
Originally Posted by DamienD View Post
Heya Toni,

Unfortunately using this latest beta, WinUAE now takes an absolute age to start... 40 seconds as opposed to 5 seconds

I guess it's to do with all the above and me having 2480+ configurations.
Quote:
Originally Posted by Toni Wilen View Post
Does it only happen if "art" paths panel option is set?
Quote:
Originally Posted by DamienD View Post
I'd imagine so but at work currently so can't test further until tonight.
Hey Toni,

Have now had the chance to test with "Cache Boxart files" unticked; it still takes 35 seconds for WinUAE to be displayed after double-clicking the desktop shortcut.
DamienD is offline  
Old 11 July 2018, 22:51   #55
DamienD
Global Moderator

DamienD's Avatar
 
Join Date: Aug 2005
Location: London / Sydney
Age: 41
Posts: 12,180
Quote:
Originally Posted by Toni Wilen View Post
Does winuae.7z fix the slowdown?
Just saw this; will test immediately

Edit: why yes, yes it does!!! 5 seconds again!!! You sir, are an absolute legend!!!
DamienD is offline  
Old 11 July 2018, 23:35   #56
Torkio
Registered User
 
Join Date: Jan 2007
Location: Italy
Posts: 51
Quote:
Originally Posted by hexaae View Post
@Torkio
With G-Sync I don't use Lagless or Std Vsync options, I leave it empty since g-sync will automatically sync video refresh to 50/60 Hz/fps. Games run perfectly in PAL/NTSC native mode and super smoothly at 50 (PAL) or 60 (NTSC) fps as it was 20 years ago thanks to G-Sync.
I have the HW in signature and a 75Hz Windows desktop native resolution.
Thanks, I know benefits of G-sync but the new beamraced v-sync gives the same perfect picture without tears and stuttering, reducing to 0 input lag, So I'm quite welcome to disable g-sync now that there is this option, even more since 100 Hz PAL is working very well.
Torkio is offline  
Old 12 July 2018, 21:14   #57
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 21,796
Quote:
Originally Posted by hexaae View Post
This is what I see after manually editing dh0: before I press OK,

...and here is it after boot attempt:


EDIT:
Worth mentioning: if I save the same config with PFS3 HDFs (generated loading SFS cfg, removing SFS HDFs, and then re-adding from scratch PFS3 HDFs), and try the opposite (= start WinUAE, Load PFS3 cfg, PFS3 -> manually changed to SFS) I can't reproduce No disk in DH0! Seems to happen only if I start from SFS cfg.
Still can't duplicate. It is almost guaranteed it has something to do with either HDF. (Not necessarily the one that has the problem)

I'll repeat again: You MUST remove all unnecessary options from the config before posting it. Your config still has far too many options enabled, too many harddrives, JIT enabled, CPU is 68060 and so on..

For example remove those unneeded directory harddrives. Still happening? If yes, keep the config and remove more options.

EDIT: Also exact beta that introduced it may help.

EDIT2: Other HDF has default geometry, it is possible it gets copied to another HDF (I can't see how). If you edit its geometry (to something else, exact value is not important), save the config, load it again, try to duplicate the problem, check what TO command says.

Last edited by Toni Wilen; 12 July 2018 at 22:23.
Toni Wilen is offline  
Old 12 July 2018, 21:22   #58
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 21,796
http://www.winuae.net/files/b/winuae_4010b5.7z
http://www.winuae.net/files/b/winuae64_4010b5.7z

Beta 5: (Probably still one more to go..)

- input.keyboard_type was always read as Amiga keyboard. If PC layout was set as default, keyboard layout was read incorrectly from config file.
- Amiga reset during RTG rendering in RTG multithread mode could have caused a crash.
- Modified Filesys path in hardfile dialog was not saved if dialog was exited with return key.
- Don't attempt to resolve symbolic links or shortcuts when saving config file paths. (b4)
- Only attempt to resolve symbolic links when directory filesystem accesses it (to simulate Amiga side link), not when opening disk images, hardfiles etc..
- Fixed clipboard sharing (b1 update broke it)
- Delay clipboard data transfer when screen mode changes to prevent situation where mode changed because of program taking over the system. (Emulator can't easily detect between all kinds of Amiga-side triggered native<>RTG mode changes or if it is user switching modes/alt-tabbing which triggers clipboard data transfer check)
- Added Harddrives and Disk Swapper drag'n'drop workaround that fixes corrupted graphics during drag operation. (ListView_CreateDragImage seems to been broken since Vista or so..)
Toni Wilen is offline  
Old 12 July 2018, 22:19   #59
DamienD
Global Moderator

DamienD's Avatar
 
Join Date: Aug 2005
Location: London / Sydney
Age: 41
Posts: 12,180
Thanks Toni
DamienD is offline  
Old 13 July 2018, 04:04   #60
hexaae
Registered User
hexaae's Avatar
 
Join Date: Jul 2006
Location: Italy
Age: 42
Posts: 1,109
b5.
Strange crash using PPaint for 30 min and switching WB/PPaint screens (LAMIGA+M or N).
Attached dmp:
https://nofile.io/f/f7pYcOcSK4V/winu....56_ppaint.zip
hexaae is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
WinUAE 3.6.0 beta series Toni Wilen support.WinUAE 410 27 January 2018 22:19
WinUAE 3.3.0 beta series Toni Wilen support.WinUAE 256 06 June 2016 15:36
WinUAE 2.4.0 beta series Toni Wilen support.WinUAE 342 29 March 2012 09:02
WinUAE 2.0.1 beta series Toni Wilen support.WinUAE 14 22 December 2009 18:46
WinUAE 1.6.1 beta series Toni Wilen support.WinUAE 54 18 June 2009 11:05

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 15:07.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Page generated in 0.09448 seconds with 16 queries