A3000 SysInfo results

amiman99 · 26 October 2009, 17:10

I have A3000 with CBM accelerator 68040/25Mhz
I have noticed that the sysinfo speed results are slower then A4000 with same spec card. The MIPS are at 14.82Mips, the 040 s/b 18.88Mips, but the FLOPS are correct at 4.74FLOPS.
The clock freq shows 25.6Mhz.
The other odd thing is that Sysinfo displays (NOT IN USE) for math coprocessor and MMU, but I checked the CPU and it is the full version not the EC.

rkauer · 27 October 2009, 02:35

To "force" MMU use, type "CPU fastrom" in a CLI window before starting sysinfo. Then you'll see the speed difference...

amiman99 · 27 October 2009, 02:47

Quote:

Originally Posted by rkauer

To "force" MMU use, type "CPU fastrom" in a CLI window before starting sysinfo. Then you'll see the speed difference...

Did it, but is still the same

rkauer · 27 October 2009, 03:37

????????????????????????????

r.cade · 27 October 2009, 04:32

Fast page mode vs. static column ZIP memory? Which do you have?

amiman99 · 27 October 2009, 16:57

Quote:

Originally Posted by r.cade

Fast page mode vs. static column ZIP memory? Which do you have?

I don't know yet, I will have to check, but it's a pain in butt to remove everything just to see the chips.

Next time I'm in it, I'll check.

coze · 27 October 2009, 17:04

if you have more than 4mb it'ld have to be ZIP I guess.

also AFAIR sysinfo never really did a good job of identifying the MMU.

r.cade · 28 October 2009, 01:24

ZIP memory came in both types. Static column should be 10% faster than page mode... It might make the difference here.

26 October 2009, 17:10	#1
amiman99 Registered User Join Date: Sep 2009 Location: San Antonio, TX USA Age: 50 Posts: 1,184	A3000 SysInfo results I have A3000 with CBM accelerator 68040/25Mhz I have noticed that the sysinfo speed results are slower then A4000 with same spec card. The MIPS are at 14.82Mips, the 040 s/b 18.88Mips, but the FLOPS are correct at 4.74FLOPS. The clock freq shows 25.6Mhz. The other odd thing is that Sysinfo displays (NOT IN USE) for math coprocessor and MMU, but I checked the CPU and it is the full version not the EC.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SysInfo 4.0	Geijer	News	185	13 September 2017 17:32
aibb and sysinfo results ?	turrican3	support.WinUAE	13	21 August 2013 16:27
Comparing SysInfo results with x86 platform?	codeflash	Hardware mods	2	16 June 2013 00:50
FS: FULLY LOADED A3000, a bare bone A3000 and lots of Amiga Stuff!	emc_errol	MarketPlace	0	30 January 2009 22:33
Sysinfo ?	THX1138	support.Apps	4	10 November 2003 00:08

27 October 2009, 02:35	#2
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	To "force" MMU use, type "CPU fastrom" in a CLI window before starting sysinfo. Then you'll see the speed difference...

27 October 2009, 03:37	#4
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	????????????????????????????

27 October 2009, 04:32	#5
r.cade Registered User Join Date: Aug 2006 Location: Augusta, Georgia, USA Posts: 550	Fast page mode vs. static column ZIP memory? Which do you have?

27 October 2009, 17:04	#7
coze hastala vista winny vista Join Date: Feb 2006 Location: mt fuji Age: 46 Posts: 1,335	if you have more than 4mb it'ld have to be ZIP I guess. also AFAIR sysinfo never really did a good job of identifying the MMU.

28 October 2009, 01:24	#8
r.cade Registered User Join Date: Aug 2006 Location: Augusta, Georgia, USA Posts: 550	ZIP memory came in both types. Static column should be 10% faster than page mode... It might make the difference here.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)