10 April 2018, 14:06 | #41 | |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
Quote:
And idea's Damien..Just trying to not give Toni hassle.. Paul. Last edited by Mclane; 10 April 2018 at 14:14. |
|
10 April 2018, 14:14 | #42 |
Lemon Curry ?
Join Date: Sep 2004
Location: Denmark
Age: 49
Posts: 4,079
|
I usually use tinyurl for all links here.
DamienD's Media Fire link: https://tinyurl.com/ydhkwse7 |
10 April 2018, 14:31 | #43 |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
Thank you retroplay, as said, the more hassle Toni has to look at an item the more likely he won't be bothered and I don't blame him.
Cheers all... Paul.. |
10 April 2018, 14:52 | #44 |
Banned
Join Date: Aug 2005
Location: London / Sydney
Age: 47
Posts: 20,420
|
|
10 April 2018, 15:27 | #45 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
Thanks.
It hangs in calibration loop, one possible reason is that D3DKMTGetScanLine() does not return scanline data. (Which hopefully isn't true..) Download http://www.winuae.net/files/b/winuae.7z and create new log. It may not hang anymore but it also most likely won't work correctly. No need for dump files. EDIT: Does same happen if you use primary monitor? Last edited by Toni Wilen; 10 April 2018 at 15:38. |
10 April 2018, 16:04 | #46 | |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
Quote:
Thanks EDIT: Still hung I'm afraid.. |
|
10 April 2018, 17:22 | #47 | |
Registered User
Join Date: Sep 2014
Location: Canada
Posts: 12
|
Quote:
- Found that black screen caused by low latency Vsync. Disabled Vsync = no more black screen, boot properly. - Also, "Standard Vsync" make the FPS drop from 50 to ~45 with very bad sound, unless at least "Cycle Exact (DMA/Memopery access)" is selected, which in turn slow down the emulation considerably, even with "JIT" enabled and "CPU Emulation speed" set to "Fastest possible". In other word, if you want to watch demos that requires a 040/060 and want fast FPS and clean sound, you currently can't use any VSync at all. I already use "Cycle Exact (Full)" for anything Amiga 1200 or lower that runs standard Amiga software and games. The problem is with Amiga 3000 and 4000 and accelerator boards where you need all the speed you can get AND want to have Vsync enabled. "Cycle Extract" is not an option here. NOTE: I'm launching Winuae with the following batch file using SetRes to set my monitor from 60Hz to 50Hz and back to 60Hz when I'm done: "C:\SetResSingle_V2_3 GPL3\SetRes.exe" h1680 v1050 f50 START /W "" "D:\Commodore\Amiga\Emulator\WinUAE\winuae64.exe" "C:SetResSingle_V2_3 GPL3\SetRes.exe" h1680 v1050 f60 NOTE 2: I case this could be an issue, I'm using 3 X monitors, without the Nvidia surround option. Windows 7 AERO is enabled. And just to make it clear my rig is not the limiting factor: 2500K @ 4.7Ghz 16GB RAM @ 1866Mhz 2 X Crucial M4 SSD in RAID0 660 GTX @ 1.3Ghz Latest OS / hardware drivers installed I hope this help, Ramon Last edited by ramon; 10 April 2018 at 17:28. Reason: forgot to mention AERO |
|
10 April 2018, 17:40 | #48 |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
Yeah, it was noted earlier that it only happens when the Low vsync is used, I wonder why its ok for some and not on our machines..
Probably some M$ update that screws up Win 7 Any thing to get us on Win 10... |
10 April 2018, 18:24 | #49 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
Quote:
This API was introduced in Vista, it should not have anything to do with Windows versions. |
|
10 April 2018, 19:01 | #50 | |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
Quote:
Ah some other stuff didn't come up but on a 2nd try it did..I'll post a screenie Last edited by Mclane; 10 April 2018 at 19:06. |
|
10 April 2018, 19:15 | #51 |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
I don't get it, on one occasion there was some stuff after that line about D3D11 and WASPI but as I tried to copy it (or attempt to) the window closed, I've neow tried 3 more times and it is like before, the same line you mention with a few frequencies added the same line
Now tried 10 times and still the same line as said...nothing after |
10 April 2018, 19:17 | #52 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
Quote:
|
|
10 April 2018, 19:29 | #53 | |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
Quote:
The new bits in the window were what I saw in that one boot that I could not repeat, also there was a delay from the extra lines and then some more suddenly appeared on or after where it says SIZE MINIMIZED Oh, and black screen here still.. |
|
10 April 2018, 19:32 | #54 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
Include your config file because log does not really match what I expected..
|
10 April 2018, 19:44 | #55 |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
Something dead weird here (all malware and virus scanned) I ran it again and I got one extra line only this time
target_calibrate_spin<> start I'm using Damien D's compilation with screenshots etc, no default config that I can see, when I run its from the quick start using Winuae's inbuilt settings for an A500 and no disk image, so not using one of Damiens per game settings unless Winuae has another place it stores a config? Sorry to be a pain.. |
10 April 2018, 19:57 | #56 |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 857
|
Sorry, got to pick my daughter up, back in as hour or so
|
10 April 2018, 20:29 | #57 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
Quote:
|
|
11 April 2018, 07:11 | #58 |
m68k all the way
Join Date: Aug 2011
Location: Koalaland
Posts: 523
|
I didn't have any problem with this in the 3.6.x series, but I am trying right now to add an 50MB SCSI hard drive (A2091) that has 2 partitions: DH0: (20MB) and DH1: (30MB), both are FFS partitions.
You create these as normal in HDToolbox, click "Save Changes to Drive", then reset. After WB boots up, DH1: doesn't appear. When I go into HDToolbox, I find out that it was reset into 1 partition. The last time I recreate this bug, I had a white dialog box that said that drives were added or removed from the system and that I had to save the changes. I also found out it was created as a Custom partition. Log is below. After that, I created a 40MB HD in 4.0.0, also with 2 partitions. But didn't have a problem with it. So maybe there is a bug that prevents the creation of HDs exceeding a certain size? |
11 April 2018, 15:32 | #59 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
Quote:
|
|
11 April 2018, 18:25 | #60 | |
Registered User
Join Date: Sep 2014
Location: Canada
Posts: 12
|
Quote:
- Both 3.6.1 and 4.0 act the same way, except "low latency Vsync" is broken with 4.0 (black screen). - In both cases, at least "Cycle Exact (DMA/Memory)" must be enabled for steady 50 FPS with "Standard Vsync". - Unfortunately, "Standard Vsync" is nowhere near as good as "Low Latency Vsync", especially apparent with the demo "Starstruck" parallax intro. - Also, "Low latency Vsync" in 3.6.1 doesn't require any Cycle exact to work properly. -Finally, for some strange reason, selecting only "Cycle Exact (DMA/Memory access" is a lot SLOWER than selecting "Cycle Exact (Full)"! |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE 3.2.2 beta series | Toni Wilen | support.WinUAE | 21 | 20 December 2015 17:35 |
WinUAE 3.1.0 beta series | Toni Wilen | support.WinUAE | 305 | 06 June 2015 23:25 |
WinUAE 2.3.3 beta series | Toni Wilen | support.WinUAE | 124 | 17 September 2011 15:48 |
WinUAE 2.0.0 beta series | Toni Wilen | support.WinUAE | 445 | 13 December 2009 14:46 |
WinUAE 1.6.1 beta series | Toni Wilen | support.WinUAE | 54 | 18 June 2009 11:05 |
|
|