Os4.1 Fe1 YT.rexx really fast streaming tips

White · 21 October 2017, 22:33

Hi Tony sorry I do not know if it's the right section, today I tried YT.rexx.
I was really impressed with running speed comparable to windows as synchronization of audio and video speed.
The configuration is very simple under the screens.
Only defect I can not understand and that after a few minutes the video just stops.
Without any system crash or block I tried various configurations I can not figure out where I'm wrong.
Doing a test is simple just take a youtube video url and proceed with the copy and paste and open YT.rexx as below and use the indicated player.
If I can have advice I would be happy, the version of winuae I used is 3.6.0 beta 6
Thanks for any help the configuration is the classic 1gb of uaegfx memory and mediator with audio ES1370 pci sb128
What I can not understand is why it stops streaming after a few minutes,
Thanks again.

Schlachtwerk · 22 October 2017, 01:50

Why you will stream yt on an emulator, when it will rum perfect on the host system ???

White · 22 October 2017, 09:49

@Schlachtwerk
sorry I did not understand the answer, thank you anyway.
I think I'd like to use OS4.1 at best with the passage of time :-)

At this time the video is not interrupted if I apply the following settings, using autoplay but the video is not visible but it only sounds, but it is not interrupted.
I would like to understand if possible how to set a lower resolution. Thank you for any help.

White · 22 October 2017, 10:01

At the moment SMTube works with emotion player but the speed is lower.
I tried using YT.rexx with emotion player but at the moment it does not seem to support the https: // protocol with YT.rexx

White · 22 October 2017, 10:20

screen

White · 22 October 2017, 18:48

Fixed, this will only work well with the 64bit version, the 32bit version is oddly very slow.
The problem was in the stack of configuration set to 10000, instead it is put to 65536 now it works well without blocks
screenshot

White · 23 October 2017, 08:09

I would like if possible to do a trial with emotion-player with YT.rexx but I do not have the knowledge to create an arexx script that can do this.
At this time, it does not support the ssl https: // protocol
Can someone help me?
Thanks a lot if I have to move the question in another section I do it gladly, apologize yet.
Thanks for any answers.

White · 23 October 2017, 08:49

I believe the https // support line is this,
while emotion-player with SMTube works but goes a bit slow, YT.rexx is really faster. Thanks if anyone can help me.

DamienD · 23 October 2017, 17:32

Quote:

Originally Posted by White

Thanks a lot if I have to move the question in another section I do it gladly, apologize yet.
Thanks for any answers.

Yeah, this is clearly not a WinUAE support issue...

...thread moved accordingly

White · 23 October 2017, 19:08

DamienD thanks, hope to find a solution thanks again

White · 26 October 2017, 12:58

Hello I was trying to search for YT.rexx author to ask if it was possible to make Emotion Player compatible with her program but can not find an email anyone knows who the author is?
thanks also for any suggestions.

ma693541 · 26 October 2017, 23:24

Try from the OS4Depot yt.lha description, there you will find the name to the author. BTW, here you have it; Michael Trebilcock.

White · 26 October 2017, 23:28

hi ma693541, thank you many will try to contact him again thanks.
Thanks for asking about osdepot

AMIGASYSTEM · 29 December 2017, 10:19

MickJT-MPlayer 1.0 realized t works well with YT.rexx, based on MPlayer 1.3.0 (ffmpeg 3.0), successfully tested with WinUAE.

21 October 2017, 22:33	#1
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Os4.1 Fe1 YT.rexx really fast streaming tips Hi Tony sorry I do not know if it's the right section, today I tried YT.rexx. I was really impressed with running speed comparable to windows as synchronization of audio and video speed. The configuration is very simple under the screens. Only defect I can not understand and that after a few minutes the video just stops. Without any system crash or block I tried various configurations I can not figure out where I'm wrong. Doing a test is simple just take a youtube video url and proceed with the copy and paste and open YT.rexx as below and use the indicated player. If I can have advice I would be happy, the version of winuae I used is 3.6.0 beta 6 Thanks for any help the configuration is the classic 1gb of uaegfx memory and mediator with audio ES1370 pci sb128 What I can not understand is why it stops streaming after a few minutes, Thanks again. Last edited by White; 09 January 2021 at 18:13.

22 October 2017, 09:49	#3
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	@Schlachtwerk sorry I did not understand the answer, thank you anyway. I think I'd like to use OS4.1 at best with the passage of time :-) At this time the video is not interrupted if I apply the following settings, using autoplay but the video is not visible but it only sounds, but it is not interrupted. I would like to understand if possible how to set a lower resolution. Thank you for any help. Last edited by White; 09 January 2021 at 18:13.

22 October 2017, 10:20	#5
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	screen Last edited by White; 09 January 2021 at 18:13.

22 October 2017, 18:48	#6
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Fixed, this will only work well with the 64bit version, the 32bit version is oddly very slow. The problem was in the stack of configuration set to 10000, instead it is put to 65536 now it works well without blocks screenshot Last edited by White; 09 January 2021 at 18:13.

23 October 2017, 08:49	#8
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	I believe the https // support line is this, while emotion-player with SMTube works but goes a bit slow, YT.rexx is really faster. Thanks if anyone can help me. Last edited by White; 09 January 2021 at 18:13.

22 October 2017, 01:50	#2
Schlachtwerk 68k RULEZ Join Date: Jul 2010 Location: Germany Posts: 199	Why you will stream yt on an emulator, when it will rum perfect on the host system ???

22 October 2017, 10:01	#4
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	At the moment SMTube works with emotion player but the speed is lower. I tried using YT.rexx with emotion player but at the moment it does not seem to support the https: // protocol with YT.rexx

23 October 2017, 08:09	#7
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	I would like if possible to do a trial with emotion-player with YT.rexx but I do not have the knowledge to create an arexx script that can do this. At this time, it does not support the ssl https: // protocol Can someone help me? Thanks a lot if I have to move the question in another section I do it gladly, apologize yet. Thanks for any answers.

23 October 2017, 19:08	#10
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	DamienD thanks, hope to find a solution thanks again

26 October 2017, 12:58	#11
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Hello I was trying to search for YT.rexx author to ask if it was possible to make Emotion Player compatible with her program but can not find an email anyone knows who the author is? thanks also for any suggestions.

26 October 2017, 23:24	#12
ma693541 Computer Wizard Join Date: Aug 2007 Location: Ramberg/Norway Posts: 928	Try from the OS4Depot yt.lha description, there you will find the name to the author. BTW, here you have it; Michael Trebilcock. Last edited by ma693541; 26 October 2017 at 23:26. Reason: Small typo.

26 October 2017, 23:28	#13
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	hi ma693541, thank you many will try to contact him again thanks. Thanks for asking about osdepot Last edited by White; 26 October 2017 at 23:35. Reason: error

29 December 2017, 10:19	#14
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,248	MickJT-MPlayer 1.0 realized t works well with YT.rexx, based on MPlayer 1.3.0 (ffmpeg 3.0), successfully tested with WinUAE. Last edited by AMIGASYSTEM; 23 January 2018 at 00:02.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NetSurf beta OS 4.1 fe1 open video with emotion player help script	White	support.Apps	13	20 April 2019 10:14
New tool: ShapesInfo.rexx	idrougge	Coders. Blitz Basic	0	29 January 2016 13:36
Rexx Compiler manual	videofx	request.Other	0	02 June 2014 19:48
suggestion for rexx GUI	systmcrsh	support.Apps	3	03 March 2011 17:57
New Rexx Book is Available	howardfci	News	0	18 June 2005 01:23