WinUAE 3.6.0 beta series

[AnnaWu]

Originally Posted by Toni Wilen

It was quick fix, I am not yet sure if it is 100% correct fix.

I tried all possible combinations (x86 bridgboards/PC Bridge 40/80/x86 VGA/XDIDE Universal/ IDE Primary/AB) and can not find any other problems.

Thanks again!

[thomas]

Originally Posted by Toni Wilen

- uaehf.device hardfiles/harddrives unit number is now user configurable.

Config with HDF configured as PCMCIA SRAM does not load correctly, it switches to UAE / DH0.

When set to SRAM, the config is saved correctly and the saved config can be loaded in 3.5.0.

[AnnaWu]

Is the ALG (American Laser Games) emulation working with newer WinUAE 3.6.0 beta versions?
winuae_3600b5 (see screenshot)
winuae_3600b3 (see 2nd screenshot)

The last working beta version for me was winuae_3600b3

[AnnaWu]

American Laser Games
Mad Dog McCree
The last working beta version for me is winuae_3600b3

[Toni Wilen]

Originally Posted by thomas

Config with HDF configured as PCMCIA SRAM does not load correctly, it switches to UAE / DH0.

Originally Posted by AnnaWu

ALG (American Laser Games)

Both fixed now.

Mouse/joystick button release when screen mode changes: later..

[AnnaWu]

Originally Posted by Toni Wilen

Both fixed now.

Mouse/joystick button release when screen mode changes: later..

You are my hero.
Thanks for the fast ALG fix.

[DamienD]

Originally Posted by AnnaWu

You are my hero.

...not just yours; mine also (and I'm sure many others around the world)

In fact, where would the Amiga community be without Toni??? Probably dying out slowly along with the hardware

[Dunny]

Originally Posted by DamienD

...not just yours; mine also (and I'm sure many others around the world)

In fact, where would the Amiga community be without Toni??? Probably dying out slowly along with the hardware

s/slowly/faster

[AnnaWu]

Just a question about the Expansion GUI
x86 bridgeboards
If I load my config (*.uae) file, it not show me automatically the settings.
Only if i select x86 bridgeboards by hand.
Is this OK?

[antiriad76]

Originally Posted by DamienD

...not just yours; mine also (and I'm sure many others around the world)

In fact, where would the Amiga community be without Toni??? Probably dying out slowly along with the hardware

WinUAE and the Vampire are the last hurrah of the Classic Amiga scene. However I can say that I now rely on WinUAE 95% of the time. I remember way back in the 90s with the Lazarous project trying to get something to play. I think it was around 1995 or 96 when I run my fist emulated Amiga game on the UAE emulator. That was 22 years ago.....

[AC/DC HACKER!]

Originally Posted by Toni Wilen

http://www.winuae.net/files/b/winuae_3600b4.7z
http://www.winuae.net/files/b/winuae64_3600b4.7z

Beta 4:

- Expansion panel string datatype was unimplemented (forgotten..). NIC MAC option is now visible.

Hello Toni,

I haven't checked b5 yet, so hang in there. With Beta 4, switching between MAC and Slirp only works if you've exited WinUAE completely. Using F12 and Reset back to config doesn't release previous Network choice. I was testing with X-Surf 100 Z3 only so far.

[Toni Wilen]

It is by design. 99% of expansion options are not on the fly switchable.

[Toni Wilen]

Originally Posted by AnnaWu

Just a question about the Expansion GUI
x86 bridgeboards
If I load my config (*.uae) file, it not show me automatically the settings.
Only if i select x86 bridgeboards by hand.
Is this OK?

It won't autoselect anything if more than one expansion is enabled. (Yes, it needs to work better someday..)

[AC/DC HACKER!]

Originally Posted by Toni Wilen

It is by design. 99% of expansion options are not on the fly switchable.

Hmm..okay. I was thinking clicking Reset after tapping F12 would more of an Amiga Power Off since it brings you back to config settings than on the fly. On the fly, as I've always understood it, is power is still On..as in machine is running and you make changes...which might enable once you reset without a power off.

Anyway, I gotcha.

[Toni Wilen]

Originally Posted by AC/DC HACKER!

Hmm..okay. I was thinking clicking Reset after tapping F12 would more of an Amiga Power Off since it brings you back to config settings than on the fly. On the fly, as I've always understood it, is power is still On..as in machine is running and you make changes...which might enable once you reset without a power off.

Hard reset (GUI Reset button or ctrl+win+win+alt) technically should apply current expansion changes but it isn't doing it yet. It will happen someday..

On the fly without reset can get too risky..

[Toni Wilen]

http://www.winuae.net/files/b/winuae_3600b6.7z
http://www.winuae.net/files/b/winuae64_3600b6.7z

Beta 6:

- "PC Bridge (40)" drive was missing from "Don't support 360k floppy images in Amiga drive unless it is configured as 5.25" drive" check.
- American Laser Games work again (b3).
- PCMCIA SRAM/IDE work again (b1?).
- Previous button release update always released buttons when input devices were released but it should have only been done when mouse was uncaptured.
- Delay avioutput init until first display frame or sound buffer recording request comes. Previously "before filtering" option may have used wrong display size in some situations.
- Avioutput does not anymore forget uncompressed video selection.
- First frame was not rendered (and also not recorded) if statefile was restored when emulation was already running.
- If emulator state was changed (debugger breakpoint, statefile save etc..), last frame before state change was not recorded if avioutput recording was enabled.
- uae-configuration joystick port (joyportx) modification only queued changes.

[Amiga68k]

- uae-configuration joystick port (joyportx) modification only queued changes.

Confirmed working properly now

[bladecgn]

Originally Posted by Toni Wilen

- Previous button release update always released buttons when input devices were released but it should have only been done when mouse was uncaptured.

Confirmed working properly now!
Thanks!

[bladecgn]

It seems to me that the user relative path option for filesystem ist broken again.

[mark_k]

One line from the 3.6.0b6 changes in cfgfile.cpp (commit):
} else if (_tcslen(hdc) >= 5 && !_tcsncmp(hdc, _T("scide"), 6)) {

Should the 6 be 5?