Another Atari ST conversion?...............Recoil - Page 6

DamienD · 04 January 2020, 15:03

Quote:

Originally Posted by lesta_smsc

Oh I see... I just assumed you could make it floppy version by copying files over as per what @Galahad/FLT said. But I think you are after a ready made ADF

Yes I could... it's a totally different file structure though i.e:

Hard drive file on the left and the disk version on the right:

This is no problem though; I'd just prefer an "official" disk with the following from Galahad / Scoopex

updated Amiga music module from ADRDesign.
mr.spiv's fixed cracktro.

Quote:

Originally Posted by mr.spiv

I uploaded the fixed intro. It's been lingering around for few days already:
http://eab.abime.net/zone/scx_intro1_fix

jarre · 04 January 2020, 23:57

Quote:

Originally Posted by nujack

Next release „GatewayY“?

I hope this will released soon Nujack, but i do not know the status of this project, it seems there is a problem with switching from light-gun controls to Mouse controls, lets keep our fingers crossed, and thanks again to you and cebulba for getting this game 6 months ago warped and imaged.!!

Superman · 05 January 2020, 20:57

I have now made a fixed ADF using Mr Spivs updated cracktro. I am pleased to say that it works fine on my A500 with kickstart 1.3 now. I can post it to the zone with Galahad and Mr Spivs permission of course?

Galahad/FLT · 05 January 2020, 21:51

Quote:

Originally Posted by Superman

I have now made a fixed ADF using Mr Spivs updated cracktro. I am pleased to say that it works fine on my A500 with kickstart 1.3 now. I can post it to the zone with Galahad and Mr Spivs permission of course?

Hold up there champ!

1).You need to take the final module that ADRDesign provided in this very thread.
2). You need to pack it as a data file in Propack
3). packed mod needs to be renamed RECOIL.AMI and saved to floppy
4). Then its done

At the moment the updated mod is only in the HD version, which I still need to fix.

Superman · 05 January 2020, 21:57

Quote:

Originally Posted by Galahad/FLT

Hold up there champ!

1).You need to take the final module that ADRDesign provided in this very thread.
2). You need to pack it as a data file in Propack
3). packed mod needs to be renamed RECOIL.AMI and saved to floppy
4). Then its done

At the moment the updated mod is only in the HD version, which I still need to fix.

Oh that's a little beyond my expertise unfortunately. I'll wait for the official update in that case

gradius3 · 05 January 2020, 22:51

Thanks for this new release!!! Fun game!

Galahad/FLT · 10 January 2020, 22:37

Recoil v1.3 final.

* Cracktro fixed so unaffects loading
* Amiga remix by ADRDesign updated
* NTSC/PAL detection and timing for both

It's attached, enjoy.

Time to move onto something else

Superman · 10 January 2020, 22:43

Nice job

malko · 10 January 2020, 23:06

Thanks Galahad

!

DamienD · 11 January 2020, 00:03

Quote:

Originally Posted by Galahad/FLT

Recoil v1.3 final.

* Cracktro fixed so unaffects loading
* Amiga remix by ADRDesign updated
* NTSC/PAL detection and timing for both

It's attached, enjoy.

Time to move onto something else

Perfect, many thanks my friend!!!

lesta_smsc · 11 January 2020, 00:09

Quote:

Originally Posted by Galahad/FLT

Recoil v1.3 final.

* Cracktro fixed so unaffects loading

* Amiga remix by ADRDesign updated

* NTSC/PAL detection and timing for both

It's attached, enjoy.

Time to move onto something else

We are indebted to you all for making this possible.

adrdesign · 11 January 2020, 02:54

Yeah THANK YOU SO MUCH

tolkien · 11 January 2020, 12:04

Quote:

Originally Posted by Galahad/FLT

Recoil v1.3 final.

* Cracktro fixed so unaffects loading
* Amiga remix by ADRDesign updated
* NTSC/PAL detection and timing for both

It's attached, enjoy.

Time to move onto something else

Damn! Dont know what happends. I can't unrar the file. Tried with unrar and xadunfile but doesn't work. :/

DamienD · 11 January 2020, 12:12

Quote:

Originally Posted by tolkien

Damn! Dont know what happends. I can't unrar the file. Tried with unrar and xadunfile but doesn't work. :/

Works fine here using WinRAR

I've unarchived, re-zipped as a .ZIP and put in The Zone! for you.

tolkien · 11 January 2020, 12:21

oh yes! Thanks DamienD. It works now.
And thanks of course to Galahad and adrsdesign!

Irek´72 · 18 January 2020, 14:52

Good job Galahad!

I just uploaded your last HD version and a start icon in the zone (I tried it on my 040 CPU and it ran without a problem so I think the game should run on all other configurations from the workbench)

Galahad/FLT · 18 January 2020, 16:17

No HOL entry yet?

DamienD · 18 January 2020, 17:48

Somebody will need to take title / screenshots

Ok, I've uploaded my title and one screenshot to The Zone! for HOL inclusion

Nobby_UK · 18 January 2020, 17:57

Weird

:
Basic 500 (1.3 half n half) Emulation gave a read error (block 1094)
A500+ just crashed (about the same time the read error would occur)
A600 = Fine.

DamienD · 18 January 2020, 18:10

Quote:

Originally Posted by Nobby_UK

Weird

:
Basic 500 (1.3 half n half) Emulation gave a read error (block 1094)

That is weird indeed

Works fine here via WinUAE with either:

... A500 - 1.3 ROM, OCS, 512KB Chip + 512KB Slow RAM
... A500 - 1.3 ROM, ECS, Agnus 512KB Chip + 512KB Slow RAM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Atari ST to Amiga Conversion: Ranarama	Galahad/FLT	Amiga scene	82	21 July 2021 23:05
[Atari ST conversion] Sinbad and the Throne of the Falcon	DamienD	HOL contributions	17	04 January 2021 15:24
New Atari ST conversion coming to Amiga	Galahad/FLT	Amiga scene	158	30 April 2017 18:05
Super Sprint - Atari ST Conversion	Galahad/FLT	Retrogaming General Discussion	83	12 March 2012 21:34
Old Atari ST ? Game...not sure if there was an Amiga conversion..	HCF	Looking for a game name ?	14	17 October 2004 17:43

05 January 2020, 20:57	#103
Superman Super Member Join Date: Sep 2014 Location: Wakefield Age: 48 Posts: 1,334	I have now made a fixed ADF using Mr Spivs updated cracktro. I am pleased to say that it works fine on my A500 with kickstart 1.3 now. I can post it to the zone with Galahad and Mr Spivs permission of course?

05 January 2020, 22:51	#106
gradius3 Registered User Join Date: Oct 2017 Location: Out of this World Posts: 38	Thanks for this new release!!! Fun game!

10 January 2020, 22:43	#108
Superman Super Member Join Date: Sep 2014 Location: Wakefield Age: 48 Posts: 1,334	Nice job

10 January 2020, 23:06	#109
malko Ex nihilo nihil Join Date: Oct 2017 Location: CH Posts: 4,857	Thanks Galahad !

11 January 2020, 02:54	#112
adrdesign Registered User Join Date: Nov 2013 Location: Spain Age: 45 Posts: 314	Yeah THANK YOU SO MUCH

11 January 2020, 12:21	#115
tolkien AmigaMan Join Date: Oct 2012 Location: Castro Urdiales/Spain Posts: 760	oh yes! Thanks DamienD. It works now. And thanks of course to Galahad and adrsdesign!

18 January 2020, 14:52	#116
Irek´72 ´040 User Join Date: Jun 2008 Location: Emsland/Germany Age: 51 Posts: 450	Good job Galahad! I just uploaded your last HD version and a start icon in the zone (I tried it on my 040 CPU and it ran without a problem so I think the game should run on all other configurations from the workbench)

18 January 2020, 16:17	#117
Galahad/FLT Going nowhere Join Date: Oct 2001 Location: United Kingdom Age: 50 Posts: 8,987	No HOL entry yet?

18 January 2020, 17:48	#118
DamienD Banned Join Date: Aug 2005 Location: London / Sydney Age: 47 Posts: 20,420	Somebody will need to take title / screenshots Ok, I've uploaded my title and one screenshot to The Zone! for HOL inclusion

18 January 2020, 17:57	#119
Nobby_UK Registered User Join Date: Jul 2013 Location: Liverpool Posts: 2,595	Weird : Basic 500 (1.3 half n half) Emulation gave a read error (block 1094) A500+ just crashed (about the same time the read error would occur) A600 = Fine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)