68882 installation/orientation

asm1 · 21 February 2009, 13:51

Been faffing around with all my various "bits" in anticipation of my Amiga arriving at some point next week (and of course to avoid "losing stuff")

Fitted My 64MB EDO simm (and set the jumper) on the Accelerator I bought from Zetr0

Sorry for the blurriness. I can see the white text after the arrow that says "Pin 1 68882 FPU" , the arrow points to the bottom right corner, so I'm guessing thats where it goes

but how do I tell where pin 1 is on the 68882 ?

is it to do with the gold L shaped mark ?

If so that would mean orientation thus:

but to me that doesn't look right....

Just noticed the L has a green dot in it, and there's a green C along the same side.
Don't want to fry anything when I plug it in so would like to get this right...

Andrew

PS the board is http://www.amibay.com/viewtopic.php?f=24&t=1804 - the Typhoon Mk2 1230. Better pics

alexh · 21 February 2009, 13:56

Looks fine to me (Image from BBoAH)

asm1 · 21 February 2009, 14:01

oops lol that'll teach me to ask daft questions.... didn't think to look at BBOAH

etc

thanks

Andrew

21 February 2009, 13:51	#1
asm1 Registered User Join Date: Feb 2009 Location: Glasgow, Scotland Age: 44 Posts: 637	68882 installation/orientation (Blurry Pr0n included :D) Been faffing around with all my various "bits" in anticipation of my Amiga arriving at some point next week (and of course to avoid "losing stuff") Fitted My 64MB EDO simm (and set the jumper) on the Accelerator I bought from Zetr0 Sorry for the blurriness. I can see the white text after the arrow that says "Pin 1 68882 FPU" , the arrow points to the bottom right corner, so I'm guessing thats where it goes but how do I tell where pin 1 is on the 68882 ? is it to do with the gold L shaped mark ? If so that would mean orientation thus: but to me that doesn't look right.... Just noticed the L has a green dot in it, and there's a green C along the same side. Don't want to fry anything when I plug it in so would like to get this right... Andrew PS the board is http://www.amibay.com/viewtopic.php?f=24&t=1804 - the Typhoon Mk2 1230. Better pics Last edited by asm1; 21 February 2009 at 14:06.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with orientation of A1200 PS/2 Adapter from PF Elektronik	Turran	support.Hardware	6	23 July 2013 18:39
Wanted 68882	DyLucke	MarketPlace	33	28 February 2010 07:08
Overclocking 68882	desantii	support.Hardware	16	16 December 2009 21:08
2x 68882 25 MHz (Motorola PGA) against 1x 68882 50 MHz	bastibs	Swapshop	2	26 April 2009 14:41
Burnt my 68882 , does it really matter ????	keropi	support.Hardware	11	13 December 2004 11:18

21 February 2009, 13:56	#2
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,330	Looks fine to me (Image from BBoAH)

21 February 2009, 14:01	#3
asm1 Registered User Join Date: Feb 2009 Location: Glasgow, Scotland Age: 44 Posts: 637	oops lol that'll teach me to ask daft questions.... didn't think to look at BBOAH etc thanks Andrew

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)