22 November 2017, 02:31 | #161 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,902
|
Could you mind posting that? Or send an email, I know you're running out of space here
|
22 November 2017, 12:27 | #162 |
Registered User
Join Date: Apr 2013
Location: Mallorca
Posts: 758
|
PM me here !
|
15 September 2018, 20:00 | #163 |
Registered User
Join Date: Jun 2016
Location: Stoke-On-Trent, England
Posts: 450
|
Just wanted to thank you for your hard work Cowcat.
It is really impressive to play Quake 2 on my Amiga, previously the best I could do on Quake 1 with my 060@80 was 15.7FPS I have done a few time demo's on my K1 PPC @ 333Mhz using the Sonnet driver and VooDoo3 at 15MB, also using Paula through AHI. Demo 1 - default settings @ 640x480 28.4FPS 28.5FPS 29.0FPS 28.7FPS Demo 2 - default settings @ 640x480 19.1FPS 19.6FPS 19.5FPS 19.5FPS Would using an SB128 help with speed as not having to go back through Zorro3 for Audio? Or doesn't it make much difference? |
21 September 2018, 13:59 | #164 | |
Registered User
Join Date: Apr 2013
Location: Mallorca
Posts: 758
|
@kgc210 Missed your post !!
On what machine are you playing it? Quote:
|
|
22 September 2018, 00:57 | #165 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,902
|
Quote:
Your numbers seem suspiciously low. Make sure VoodooInt=Yes in Envarc:mediator/ Also make sure Sync Every Frame is off in the Q2 Video Menu. SB128 will not be faster, if it is working properly it will actually be a little bit slower, usually like 1-2 FPS. Keep in mind AHI is all 68k, the fast PCI->PCI speeds are usually an effect of when the PPC is writing to something like Video RAM in a PCI slot. There are cases where a 16-bit audio card can be faster, but usually you're doing that for quality not speed. Anyway if you want to play with the PCI sound card in Quake 2 there are a couple things you want to change, and I usually forget a couple of these variables. Ahibits=16 (or 8 if you want to use that for some reason, use whatever you have set in AHI) sndspeed=22 (set to whatever you have set in AHI) or it might be s_khz=22 Then there's one more ahispeed perhaps? |
|
14 March 2019, 20:58 | #166 | |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,993
|
Quote:
For the others: I am getting a Wrong amount of arguments error CD failed error 20. (or something very similar). Then an initialization error. This is Radeon with software 3D (not GL). |
|
05 August 2019, 14:18 | #167 |
Registered User
Join Date: Apr 2013
Location: Mallorca
Posts: 758
|
Full update:
Fixed an issue with one of the latest levels (Big Gun) that didn't allow saving, so there was no possibility to continue playing. Didn't catch any problems with saving/loading so far besides the fix. There are some optimizations in software render dll and general update through the sources. Don't know if gcc wos version still doesn't work with some systems. https://github.com/Cowcat5150/Quake2/releases Old sources/releases would be removed from here soon. |
08 August 2019, 16:47 | #168 |
Registered User
Join Date: Mar 2010
Location: Beckenham/England
Posts: 795
|
Thanks Cowcat!
Tested for a while, not noticed any problems yet... |
08 August 2019, 17:28 | #169 |
Registered User
Join Date: Apr 2013
Location: Mallorca
Posts: 758
|
@James
Looks like for winuae runs quite well and much better than blitz for whatever reason. On my system (debian with winuae through wine), software render is in fact faster. ref_gl.dll is not compiled because even for 68k that worked more or less, is a stuttering party with lost of hard drive calls. Neverthess is by design slower. Another cool factor is that even newer compiles, I have access to old saved games from a couple of years. I played the whole normal game till the end. Now I'm on Rogue mod to find bugs. |
15 March 2020, 16:41 | #170 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,406
|
Just a heads-up here.
I tried Hyperion Quake 2 (with update) on a A4000k CSPPC Voodoo3 with 3.1.4 ROMs, AOS 3.1.4.1 and FFS. It simply loads soooooooo slooooow that it fails. It gives some time out error on loading plague. I then tried the exact same setup on a CF with PFS3 AIO and all ran fine. Well the loading part, I haven't tried stability yet, but that's a different (power?) issue of my setup. |
15 March 2020, 16:59 | #171 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,993
|
I thought it was common knowledge that FFS is very slow. ;-)
|
15 March 2020, 17:04 | #172 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,406
|
Yes, slow as in slow, you have to wait a long time, but not slow as in you have to wait a long time and then it doesn't work
|
15 March 2020, 21:18 | #173 |
Registered User
Join Date: Apr 2013
Location: Mallorca
Posts: 758
|
Many moons ago something similar happend to someone who didn't use FFS but some version of "another fancy file system". It's in this thread IIRW.
I dunno why in some systems all is fine and others impossible till they change to an alternative: Even DevilutionX has issues too. Edit: Was FFS........That could explain a lot of problems. Last edited by Cowcat; 15 March 2020 at 21:36. |
09 October 2020, 12:57 | #174 |
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 146
|
Hi all. Gave the v4.2 a try yesterday, but a couple of hiccups from both PPC versions:
gcc version freezes the entire machine. vbcc version runs, but I don't seem to get any Paula audio. Any idea what I need to tweak in order to get either version running? (A1200T, BlizzardPPC, 256MB, MediatorPCI, Voodoo3) |
09 October 2020, 22:55 | #175 |
Registered User
Join Date: Apr 2013
Location: Mallorca
Posts: 758
|
@amipal
gcc version is weird: works for me (on morphos) and maybe for grelbfarlk. For others only software render version works. Maybe a new recompile with the new sdk, changes done to minigl, etc. could fix it somewhat. It beats in performance the latest Hyperion version, apart from the features and bugfixes I did. For paula you need to enable it in the menu, provided that you have the corresponding sound dll of course. A lot of upgrades are done to various Q2 ports, specially Yamagi where I sometimes take a look. Probably a new version in near future if I'm still alive. |
14 October 2020, 20:30 | #176 | |
Registered User
Join Date: Jun 2019
Location: Saltdean, United Kingdom
Posts: 146
|
Quote:
|
|
15 October 2020, 09:37 | #177 |
Registered User
Join Date: Apr 2013
Location: Mallorca
Posts: 758
|
@amipal
Other ways to test are renaming/removing some dll's to force game to work only with what it founds. Maybe only soft.dll and paula.dll or gl.dll with ahi.dll. Another test could be removing the video/ directory. I'm testing it with WinUAE PPC and doesn't work with gcc, although WinUAE is another kind of animal (and no Wazp3D ppc there of course). |
20 January 2021, 16:10 | #178 |
Registered User
Join Date: Sep 2016
Location: italy
Posts: 1,480
|
After some experimenting i managed to get Quake2 GL working i would say it works fine with amigaos4.1FE + Voodoo3 with winuae emulator.
The only problem is that every time I have to delete the config.cfg file and redo the configuration from scratch. Seems not to keep settings. How could I solve? Thanks. here the video with the described problem: [ Show youtube player ] |
22 January 2021, 13:31 | #179 |
Registered User
Join Date: Apr 2013
Location: Mallorca
Posts: 758
|
@White
I'm assuming that is the warpos version and also the Github release. What compiled version? The gcc one tends to fail somewhat for unknown reason while the vbcc is stable. I see those gurus in the video that could be related to filesystem load/save problems. Don't remember when in the code that is done but seeing the end of the video it could be just that: You close the game, it fails to save, shows the guru and all is locked. Also at the beginning there's a suspicious guru: Fails to read the config file ??? If the vbcc version works then maybe the filesystem procedures are screwed in gcc: In my system kinda works for GL but not when switching back and forth with soft render. And no guru for me: It just hangs there. |
22 January 2021, 13:47 | #180 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,993
|
Isn't this from waaay back and maybe a recompile with gcc would help?
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ADF-Workshop (formerly DMS-Workshop) | Crashdisk | project.TOSEC (amiga only) | 233 | 23 February 2024 18:45 |
Anim Workshop Manual | _amigan | request.Other | 0 | 03 December 2012 15:30 |
Looking for Anim Workshop 2.0 | amigagenie | request.Apps | 12 | 10 July 2011 17:07 |
Quake, Quake 2 and Heretic 2 don't run after update to Mediator TX | Turrican(AEB) | support.Games | 14 | 25 August 2008 21:11 |
Workshop Pron | Boot_WB | Hardware pics | 19 | 06 June 2008 20:02 |
|
|