WinUAE 1.4.5 public beta series - Page 8

Toni Wilen · 14 December 2007, 08:27

Quote:

Whenever I use the mousewheel in winuae it screws up keyboard input in winuae

Email or attach your configuration if this is still happening. Does this only happen if you use input panel configuration?

Toni Wilen · 14 December 2007, 15:58

Quote:

Originally Posted by Toni Wilen

Email or attach your configuration if this is still happening. Does this only happen if you use input panel configuration?

Never mind, I found the problem.. (stupid me)

Buttons #4 and #5 are mapped to LALT+CursorLeft / LALT+CursorRight ("back" and "forward") by default (if more than 3 buttons) Unfortunately newish "Wheel [+]" and "Wheel [-]" are also considered buttons..

(I couldn't duplicate because I have mouse with extra buttons..)

Toni Wilen · 15 December 2007, 16:36

http://www.winuae.net/files/b/winuae_1450b17.zip

Beta 17: (getting there..)

- rom scan detected roms inside archive directory failed to load
- mouse buttons #4 and #5 default Left ALT + Cursor Left/Right mapping fixed, was mapped to "Wheel +/-" if less than 5 buttons

Ed Cruse · 17 December 2007, 18:45

Toni - 1450b17

Toni Wilen · 17 December 2007, 19:13

http://www.winuae.net/files/b/winuae_1450b18.zip

Beta 18: (RC)

- moved Picasso96 resolution list from special reserved display RAM area to regular Amiga RAM (allocated with AllocMem) This should be 100% fix to display resolution list corruption in display prefs utility. (if previous fix in b16 didn't fix it)
- following "fake" display resolutions added to Picasso96 resolution list (if no native support): 320x200, 320x240, 640x400, 640x480. In fullscreen selects next bigger supported resolution automatically. Note: fullscreen display is not centered
- keyboard led emulation should not cause random key presses anymore (but it still is quite unreliable)

default translation dll also included.

BippyM · 17 December 2007, 19:26

I still get the problem with the mousewheel and screwing up the keyboard!

What do you suggest I do so you can fix this?

Toni Wilen · 17 December 2007, 19:32

Quote:

Originally Posted by bippym

I still get the problem with the mousewheel and screwing up the keyboard!

What do you suggest I do so you can fix this?

Most obvious: check your input configuration and reset it..

BippyM · 17 December 2007, 19:42

Compatibility is selected as default

Nothing has been changed. I even remade the config file from scratch and still same problem!

Toni Wilen · 17 December 2007, 19:59

Quote:

Originally Posted by bippym

Compatibility is selected as default

Nothing has been changed. I even remade the config file from scratch and still same problem!

This is getting nowhere without having any details, like do you still see something mapped to mouse wheel or "Wheel -/+"? (when using compatibility mode) Does it happen in non-compatibility mode? Does it happen if you use other mouse options in compatibility mode? (Mouse* or Windows mouse) What input events gets sent when you use mouse wheel? (debugger, "dj 1")

BippyM · 17 December 2007, 20:03

In compatibility mouse wheel 1 is mapped to the wheel

wheel + is left alt as is wheel -

Maybe it is that!

Toni Wilen · 17 December 2007, 20:20

Quote:

Originally Posted by bippym

In compatibility mouse wheel 1 is mapped to the wheel

wheel + is left alt as is wheel -

Maybe it is that!

This is something that shouldn't happen anymore.. hmm... I guess I need to find 3 button mouse

Ed Cruse · 18 December 2007, 20:47

Toni - If this helps I'm not having any problems with the mouse wheel with b18. I did debug and all I see is what I'm supposed to see. I have a Microsoft mouse with a left and right button and a wheel/button in the middle. I'm also having no problems with the Z3/RTG memory.

Toni Wilen · 19 December 2007, 17:18

Quote:

Originally Posted by bippym

In compatibility mouse wheel 1 is mapped to the wheel

wheel + is left alt as is wheel -

Maybe it is that!

Are you 100% sure you have correct winuae.exe version? This can't happen anymore.. (famous last words, I know..)

BippyM · 20 December 2007, 03:14

I'm at my girlfriends right now (for a couple days at least) I'll get the latest beta and test when I get home, but i'm pretty sure it's the correct exe!

heavy · 20 December 2007, 16:58

I have always the problem when no focus with winuae pausing (F12) : pause stop and winuae want focus!

smoorke · 20 December 2007, 18:46

Quote:

Originally Posted by heavy

I have always the problem when no focus with winuae pausing (F12) : pause stop and winuae want focus!

please read
http://eab.abime.net/showthread.php?t=26715 before posting.
Without more details it will be difficult for toni to form a reply and handle your problem.
Anyways F12 is not used for pausing but rather to bring up the configuration screen. Paused emulation is a side effect of this function, albeit a welcome one.
Enough with the chit chat as i'm pretty sure this isn't beta related.

Toni Wilen · 20 December 2007, 20:16

1.4.5 has been officially released. This thread closed.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WinUAE 1.4.6 public beta series	Toni Wilen	support.WinUAE	84	02 February 2008 13:29
WinUAE 1.4.4 public beta series	Toni Wilen	support.WinUAE	128	22 September 2007 20:29
WinUAE 1.4.3 public beta series	Toni Wilen	support.WinUAE	156	29 July 2007 22:07
WinUAE 1.4.2 public beta series	Toni Wilen	support.WinUAE	107	12 May 2007 14:25
WinUAE 1.4.1 public beta series	Toni Wilen	support.WinUAE	17	18 March 2007 15:45

15 December 2007, 16:36	#143
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	http://www.winuae.net/files/b/winuae_1450b17.zip Beta 17: (getting there..) - rom scan detected roms inside archive directory failed to load - mouse buttons #4 and #5 default Left ALT + Cursor Left/Right mapping fixed, was mapped to "Wheel +/-" if less than 5 buttons

17 December 2007, 18:45	#144
Ed Cruse Registered User Join Date: Sep 2007 Location: Las Cruces, USA Age: 71 Posts: 351	Toni - 1450b17

17 December 2007, 19:13	#145
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	http://www.winuae.net/files/b/winuae_1450b18.zip Beta 18: (RC) - moved Picasso96 resolution list from special reserved display RAM area to regular Amiga RAM (allocated with AllocMem) This should be 100% fix to display resolution list corruption in display prefs utility. (if previous fix in b16 didn't fix it) - following "fake" display resolutions added to Picasso96 resolution list (if no native support): 320x200, 320x240, 640x400, 640x480. In fullscreen selects next bigger supported resolution automatically. Note: fullscreen display is not centered - keyboard led emulation should not cause random key presses anymore (but it still is quite unreliable) default translation dll also included.

17 December 2007, 19:26	#146
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	I still get the problem with the mousewheel and screwing up the keyboard! What do you suggest I do so you can fix this?

17 December 2007, 19:42	#148
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	Compatibility is selected as default Nothing has been changed. I even remade the config file from scratch and still same problem!

17 December 2007, 20:03	#150
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	In compatibility mouse wheel 1 is mapped to the wheel wheel + is left alt as is wheel - Maybe it is that!

18 December 2007, 20:47	#152
Ed Cruse Registered User Join Date: Sep 2007 Location: Las Cruces, USA Age: 71 Posts: 351	Toni - If this helps I'm not having any problems with the mouse wheel with b18. I did debug and all I see is what I'm supposed to see. I have a Microsoft mouse with a left and right button and a wheel/button in the middle. I'm also having no problems with the Z3/RTG memory.

20 December 2007, 03:14	#154
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	I'm at my girlfriends right now (for a couple days at least) I'll get the latest beta and test when I get home, but i'm pretty sure it's the correct exe!

20 December 2007, 16:58	#155
heavy noodle Join Date: Jun 2007 Location: europe Posts: 247	I have always the problem when no focus with winuae pausing (F12) : pause stop and winuae want focus!

20 December 2007, 20:16	#157
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	1.4.5 has been officially released. This thread closed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)