A-Max disks? - Page 66

mark_k · 18 June 2017, 15:08

Does this patched version of scsi.amhd work any better? I removed the A3000 SCSI check from it. (Remove ! from URL after pasting into your browser's URL bar.)

Code:

https://www.media!fire.com/?6x9oddzj5a3tbi1

Extract the archive and copy/rename the file to DEVS:scsi.amhd

I just tested it to boot Mac System 7.1 from hard drive on an A2000/A2091/Kickstart 3.1 config.

commie1974 · 19 June 2017, 11:33

Thank you very much, Mark!!
Apparently it's ME who does something wrong, as this one didn't work, either...
Maybe one/more mistakes with my WinUAE configuration and/or wrong hardfile....
I also tried to make a new, empty hardfile from scratch, but it's not even recognized by WinUAE as a proper device...

What can I say? It's not my lucky day and I'm afraid I'll die without being able to see Amax 2.56 in action!

Perhaps it just needs real hardware...

mark_k · 19 June 2017, 12:52

Tested-working HDF and config (delete ! after pasting into browser URL bar):

Code:

https://www.media!fire.com/?zmceq121bvkna60
https://www.media!fire.com/?bpi2ayo97brylk4

Boot the HDF, double-click A-Max QTX icon. Click Start A-Max II then OK. [You'll probably need to adjust the HDF path to match wherever you unpacked it to first.]

commie1974 · 19 June 2017, 18:46

Holy cow!!
This works, at last!!!!!!
Mark, you are a treasure!

So the other HDF I was trying to use was all crap, sadly! What a senseless waste of time...
It was not my fault, I nearly went bananas trying to figure out what was wrong!
It played nicely also with my previous config, so I had fine-tuned it correctly!!
Many-many-many thanks, pal!!!!

commie1974 · 27 June 2017, 08:47

So, for anyone who might be interested, here it is:
https://www.sendspace.com/file/semmna

It contains everything needed to emulate an OCS A500/KS1.3/1MB chip with A590 SCSI/2MB fast. It magically loads System 7.1 (fresh installation) with LOTS of apps, utils and games through WB 1.3 and the Quartex-cracked (software only) version of A-Max 2.56...

A Windoze PC with WinUAE and a mounted real SCSI partition will be needed to transfer to actual Amiga hardware, or perhaps a 020+ Amiga with Shapeshifter/Fusion/Basilisk II/A-Max IV, to do the same job!
I personally did NOT test them on real hardware, as I have no facilities here...

The 2 100MB HFS hardfiles are identical, the only difference is in the OS contained, one has System 6.0.8 and other 7.1!! They can be directly attached to Mini VMac as well, and that's the way I did the most of the software transfers...

Enjoy, and many thanks again to all the people who helped so far!

Retro1234 · 27 June 2017, 13:49

Thank you sir

- I wish there was a way to use it easily on any Amiga like HardFiles etc

commie1974 · 27 June 2017, 14:53

You're welcome!

It wouldn't be THAT fun if it was easier...

The difficulty factor and the intriguing challenges that occur due to limitations when one uses real old gear, is a very important part of the thing that's called retro-entertainment.

If we all preferred the easy way, we would permanently get stuck to emulators and never use real machines!

Well, I spent all (litterally) the last weekend collecting and transferring all the Mac software contained in the 2 HFS hardfiles, but I really enjoyed it!
I hope you'll like the result, too!

Last but not least, one could transfer them to real disks and use them with REAL Mac Plus (instead of Amiga/A-Max), they are freshly installed and full with tons of software so a real Mac would be very much happy with them, too...

18 June 2017, 15:08	#1301
mark_k Registered User Join Date: Aug 2004 Location: Posts: 2,871	Does this patched version of scsi.amhd work any better? I removed the A3000 SCSI check from it. (Remove ! from URL after pasting into your browser's URL bar.) Code: https://www.media!fire.com/?6x9oddzj5a3tbi1 Extract the archive and copy/rename the file to DEVS:scsi.amhd I just tested it to boot Mac System 7.1 from hard drive on an A2000/A2091/Kickstart 3.1 config.

19 June 2017, 12:52	#1303
mark_k Registered User Join Date: Aug 2004 Location: Posts: 2,871	Tested-working HDF and config (delete ! after pasting into browser URL bar): Code: https://www.media!fire.com/?zmceq121bvkna60 https://www.media!fire.com/?bpi2ayo97brylk4 Boot the HDF, double-click A-Max QTX icon. Click Start A-Max II then OK. [You'll probably need to adjust the HDF path to match wherever you unpacked it to first.]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mighty Max	Retro1234	project.aGTW	20	23 November 2015 14:00
A-Max ][+ on A2000	shirsch	support.Hardware	22	31 March 2014 04:15
MAX Rally	mai	HOL data problems	1	26 November 2009 21:15
OS 3.5 Max HD Size	TheCorfiot	support.Hardware	19	01 April 2009 11:50
Space MAX	Fred the Fop	request.Old Rare Games	4	09 November 2001 16:22

19 June 2017, 11:33	#1302
commie1974 Ami Worshipper Join Date: Jan 2005 Location: Piraeus-Greece Age: 44 Posts: 215	Thank you very much, Mark!! Apparently it's ME who does something wrong, as this one didn't work, either... Maybe one/more mistakes with my WinUAE configuration and/or wrong hardfile.... I also tried to make a new, empty hardfile from scratch, but it's not even recognized by WinUAE as a proper device... What can I say? It's not my lucky day and I'm afraid I'll die without being able to see Amax 2.56 in action! Perhaps it just needs real hardware...

19 June 2017, 18:46	#1304
commie1974 Ami Worshipper Join Date: Jan 2005 Location: Piraeus-Greece Age: 44 Posts: 215	Holy cow!! This works, at last!!!!!! Mark, you are a treasure! So the other HDF I was trying to use was all crap, sadly! What a senseless waste of time... It was not my fault, I nearly went bananas trying to figure out what was wrong! It played nicely also with my previous config, so I had fine-tuned it correctly!! Many-many-many thanks, pal!!!!

27 June 2017, 08:47	#1305
commie1974 Ami Worshipper Join Date: Jan 2005 Location: Piraeus-Greece Age: 44 Posts: 215	So, for anyone who might be interested, here it is: https://www.sendspace.com/file/semmna It contains everything needed to emulate an OCS A500/KS1.3/1MB chip with A590 SCSI/2MB fast. It magically loads System 7.1 (fresh installation) with LOTS of apps, utils and games through WB 1.3 and the Quartex-cracked (software only) version of A-Max 2.56... A Windoze PC with WinUAE and a mounted real SCSI partition will be needed to transfer to actual Amiga hardware, or perhaps a 020+ Amiga with Shapeshifter/Fusion/Basilisk II/A-Max IV, to do the same job! I personally did NOT test them on real hardware, as I have no facilities here... The 2 100MB HFS hardfiles are identical, the only difference is in the OS contained, one has System 6.0.8 and other 7.1!! They can be directly attached to Mini VMac as well, and that's the way I did the most of the software transfers... Enjoy, and many thanks again to all the people who helped so far!

27 June 2017, 13:49	#1306
Retro1234 Bo Bo Join Date: Jun 2006 Location: 5150 Posts: 3,863	Thank you sir - I wish there was a way to use it easily on any Amiga like HardFiles etc

27 June 2017, 14:53	#1307
commie1974 Ami Worshipper Join Date: Jan 2005 Location: Piraeus-Greece Age: 44 Posts: 215	You're welcome! It wouldn't be THAT fun if it was easier... The difficulty factor and the intriguing challenges that occur due to limitations when one uses real old gear, is a very important part of the thing that's called retro-entertainment. If we all preferred the easy way, we would permanently get stuck to emulators and never use real machines! Well, I spent all (litterally) the last weekend collecting and transferring all the Mac software contained in the 2 HFS hardfiles, but I really enjoyed it! I hope you'll like the result, too! Last but not least, one could transfer them to real disks and use them with REAL Mac Plus (instead of Amiga/A-Max), they are freshly installed and full with tons of software so a real Mac would be very much happy with them, too...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

AdSense

AdSense