Not enough memory

05 August 2016, 16:19

Hi guys,

I'm running WinUAE through Hyperspin/RocketLauncher, and I'm finally able to launch the games...

However, they don't entirely load. Instead, a black screen appears saying "Not enough memory". Then Guru Meditation #30010000.00C00276".

Any ideas? How can I debug this?

thanks in advance!

s2325 · 05 August 2016, 16:26

Maybe try to specify which games gave you error.

AMIGASYSTEM · 06 August 2016, 01:42

Also important to know which model is emulating Amiga?

06 August 2016, 15:16

Quote:

Originally Posted by s2325

Maybe try to specify which games gave you error.

This happens with any game I try. For example, I tried Sensible World of Soccer, Giana Sisters, Street Fighter, etc etc etc.

Quote:

Originally Posted by AMIGASYSTEM

Also important to know which model is emulating Amiga?

Sorry, I'm still new to all this, and not used to the lingo. What do you mean by model? It's the ROM? If yes, I think it's v1.3, but how can I confirm?

s2325 · 06 August 2016, 15:44

512KB of Chip RAM may be not enough for some games.

emufan · 06 August 2016, 16:19

there are different Amiga models. as well as there were different version of the operating system Workbench/Kickstart.
most games were made for the Amiga 500/2000 models, later there were special version/games for the Amiga 1200/4000 models (AGA chipset).
basic models came with 512kb / 1MB or 2MB memory, but you were able to expand it.

so you can do using Winuae, once the emulation is started, you can push F12 and you get the winuae setup.
best is using the Quickstart presets. eg A500 Kickstart 1.3 1 MB chip.

HYPERSPIN - COMMODORE AMIGA full setup guide 2015:
[ Show youtube player ]

there is also an illustrated guide ( shown in the video) on the hyperspin-fe.com board. but you need to register there,. to read it.

hope this will help somehow.

LS120 · 08 August 2016, 11:01

well i just watched some of that video that emufan put up and my god it's bad.. there are better ones than that on youtube for sure..

Michael Sykes · 08 August 2016, 15:22

Start the game and press F12 to check how much RAM and wich chipset/Kickstart is set in WinUAE by the launcher.

12 August 2016, 23:17

I found the problem: my roms are all in LHA format. If I unpack them, they work.

However, I have a lot of them, and do this manualy would take forever. Is there any automated way to do it? Or any add-on to make WinUAE read LHA files?

Thanks in adance!

Arnie · 12 August 2016, 23:58

Winrar unpacks .lha files. Highlight them all (Ctrl A), right mouse click on the selected files and choose how to extract them from the drop down menu.

AMIGASYSTEM · 13 August 2016, 00:10

With WinUAE now you no longer need to unpack LHA files, or files in the format LZX, just drag and drop files from the Windows Desktop on Workbench and instead of the archives you will find folders with files already extracted ready to be copied or installed.

16 August 2016, 12:07

Quote:

Originally Posted by AMIGASYSTEM

With WinUAE now you no longer need to unpack LHA files, or files in the format LZX, just drag and drop files from the Windows Desktop on Workbench and instead of the archives you will find folders with files already extracted ready to be copied or installed.

Can I launch them using HyperLauncher? I always get errors when I do...

AMIGASYSTEM · 17 August 2016, 11:24

I do not know how Hyper Launcher works, if there was somewhere a package preinstalled of Hyper Launcher i could test it.
Anyway about the Drag And Drop Desktop PC To Workbench Amiga HERE there is my discussion about it.

05 August 2016, 16:19	#1
Dazkarieh Posts: n/a	Not enough memory Hi guys, I'm running WinUAE through Hyperspin/RocketLauncher, and I'm finally able to launch the games... However, they don't entirely load. Instead, a black screen appears saying "Not enough memory". Then Guru Meditation #30010000.00C00276". Any ideas? How can I debug this? thanks in advance!

17 August 2016, 11:24	#13
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,252	I do not know how Hyper Launcher works, if there was somewhere a package preinstalled of Hyper Launcher i could test it. Anyway about the Drag And Drop Desktop PC To Workbench Amiga HERE there is my discussion about it. Last edited by AMIGASYSTEM; 17 August 2016 at 11:34.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WinUAE 3.2.1. memory dump for fake fast memory areas broken	StingRay	support.WinUAE	1	14 December 2015 20:39
Virtual Memory or Memory Compactor	Leandro Jardim	support.Apps	2	29 May 2012 23:12
Blizzard Turbo Memory - SMD memory chips doesn't work	sanjyuubi	Hardware mods	5	26 May 2010 15:40
[68000 ASM] Move memory to memory	AmigaBoy	Coders. General	7	08 December 2009 08:16
DMA memory to memory copy	BlueAchenar	Coders. General	14	22 January 2009 23:29

05 August 2016, 16:26	#2
s2325 Zone Friend Join Date: Jun 2006 Location: Gargore Age: 43 Posts: 17,789	Maybe try to specify which games gave you error.

06 August 2016, 01:42	#3
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,252	Also important to know which model is emulating Amiga?

06 August 2016, 15:44	#5
s2325 Zone Friend Join Date: Jun 2006 Location: Gargore Age: 43 Posts: 17,789	512KB of Chip RAM may be not enough for some games.

06 August 2016, 16:19	#6
emufan Registered User Join Date: Feb 2012 Location: #DrainTheSwamp Posts: 4,545	there are different Amiga models. as well as there were different version of the operating system Workbench/Kickstart. most games were made for the Amiga 500/2000 models, later there were special version/games for the Amiga 1200/4000 models (AGA chipset). basic models came with 512kb / 1MB or 2MB memory, but you were able to expand it. so you can do using Winuae, once the emulation is started, you can push F12 and you get the winuae setup. best is using the Quickstart presets. eg A500 Kickstart 1.3 1 MB chip. HYPERSPIN - COMMODORE AMIGA full setup guide 2015: [ Show youtube player ] there is also an illustrated guide ( shown in the video) on the hyperspin-fe.com board. but you need to register there,. to read it. hope this will help somehow.

08 August 2016, 11:01	#7
LS120 Registered User Join Date: Jul 2016 Location: wellington, new zealand Posts: 17	well i just watched some of that video that emufan put up and my god it's bad.. there are better ones than that on youtube for sure..

08 August 2016, 15:22	#8
Michael Sykes WinUAE end user Join Date: Jan 2014 Location: Bremen Age: 44 Posts: 649	Start the game and press F12 to check how much RAM and wich chipset/Kickstart is set in WinUAE by the launcher.

12 August 2016, 23:17	#9
Dazkarieh Posts: n/a	I found the problem: my roms are all in LHA format. If I unpack them, they work. However, I have a lot of them, and do this manualy would take forever. Is there any automated way to do it? Or any add-on to make WinUAE read LHA files? Thanks in adance!

12 August 2016, 23:58	#10
Arnie R.I.P Smudge 18-08-16 Join Date: Aug 2005 Location: Leicester/UK Age: 66 Posts: 3,968	Winrar unpacks .lha files. Highlight them all (Ctrl A), right mouse click on the selected files and choose how to extract them from the drop down menu.

13 August 2016, 00:10	#11
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,252	With WinUAE now you no longer need to unpack LHA files, or files in the format LZX, just drag and drop files from the Windows Desktop on Workbench and instead of the archives you will find folders with files already extracted ready to be copied or installed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)