Help!!! Cannot get into WB3.1 after Editing Startup Sequence For CF Card PCMCIA PATCH

nathanm1991 · 02 June 2018, 23:27

Hi Amigos I have Edited my Startup Sequence so that the CF Card in the PCMCIA would function properly and not majorly slow the system down and now im Stuck :-( AMIGADOS

ERROR IN COMMAND NAME :-(

nathanm1991 · 02 June 2018, 23:57

its ok I Reinstalled WB3.1 and it Kept things as they Were :-)

redblade · 03 June 2018, 02:02

Did you have to reinstall or would of it had been possible to fix it by holding both mouse buttons down at start up and booting in with no startup-sequence and fixing it from there??

daxb · 03 June 2018, 13:08

If you edit the Startup-Sequence then you should know how to get access (edit) to it if any error happens. Else don't change S-S. Like redblade wrote, start without Startup-Sequence and then enter "ed sys:s/startup-sequence" or similar.

tero · 03 June 2018, 17:16

or just 'ed sdfsdf' and than use the mouse to open a file via menu.

nathanm1991 · 03 June 2018, 17:56

It was a Beginners Mistake Really I didn't Save as Ascii When I Wrote the Edit in The Startup Sequence to Allow a Patch to Work. I have Done this With Success now and My PCMCIA CF Adapter is now Working with no Issue. I also had a Outdated Version of CFD Which was Causing the Dramatic Slowdown on the A1200. Cut a Long Story Short I Really do need to Get a Command Shell and Amiga-Dos Guide. Like Windows for Dummies but Amiga Equivalent

kgc210 · 03 June 2018, 18:10

I have not bought them or read them. So I can't comment on how good / useful they are but...

https://amiga.net.pl/index.php?lng=e...=10010&tms=154

https://amiga.net.pl/index.php?lng=e...=10010&tms=236

nathanm1991 · 03 June 2018, 18:18

ooo I May have to Give these a Purchase Soon :-) Thank you

daxb · 03 June 2018, 21:09

For online reference you can try this: http://wiki.amigaos.net/wiki/AmigaOS_Manual:_AmigaDOS

02 June 2018, 23:27	#1
nathanm1991 Self Diagnosed Noob! Join Date: Apr 2018 Location: Malvern, Worcestershire Age: 32 Posts: 704	Help!!! Cannot get into WB3.1 after Editing Startup Sequence For CF Card PCMCIA PATCH Hi Amigos I have Edited my Startup Sequence so that the CF Card in the PCMCIA would function properly and not majorly slow the system down and now im Stuck :-( AMIGADOS ERROR IN COMMAND NAME :-(

03 June 2018, 02:02	#3
redblade Zone Friend Join Date: Mar 2004 Location: Middle Earth Age: 40 Posts: 2,127	Did you have to reinstall or would of it had been possible to fix it by holding both mouse buttons down at start up and booting in with no startup-sequence and fixing it from there?? Last edited by redblade; 03 June 2018 at 02:02. Reason: typo: if to of

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help editing startup for noobs!	hansel75	support.Apps	14	04 February 2016 23:07
Problems using PCMCIA 128MB CF Card on WB3.1	clitosa	New to Emulation or Amiga scene	29	18 November 2012 11:10
Please help. Accelerator card breaks startup-sequence scsi.device (CF Card)?	ibsimpson	Hardware mods	1	09 May 2012 16:12
Startup-Sequence	blade002	support.Apps	8	04 April 2008 19:06
IDEFix 97 - editing the startup-sequence	Merlin	support.Hardware	17	17 March 2008 16:08

02 June 2018, 23:57	#2
nathanm1991 Self Diagnosed Noob! Join Date: Apr 2018 Location: Malvern, Worcestershire Age: 32 Posts: 704	its ok I Reinstalled WB3.1 and it Kept things as they Were :-)

03 June 2018, 13:08	#4
daxb Registered User Join Date: Oct 2009 Location: Germany Posts: 3,304	If you edit the Startup-Sequence then you should know how to get access (edit) to it if any error happens. Else don't change S-S. Like redblade wrote, start without Startup-Sequence and then enter "ed sys:s/startup-sequence" or similar.

03 June 2018, 17:16	#5
tero Registered User Join Date: Jan 2009 Location: M'Gladbach Age: 46 Posts: 621	or just 'ed sdfsdf' and than use the mouse to open a file via menu.

03 June 2018, 17:56	#6
nathanm1991 Self Diagnosed Noob! Join Date: Apr 2018 Location: Malvern, Worcestershire Age: 32 Posts: 704	It was a Beginners Mistake Really I didn't Save as Ascii When I Wrote the Edit in The Startup Sequence to Allow a Patch to Work. I have Done this With Success now and My PCMCIA CF Adapter is now Working with no Issue. I also had a Outdated Version of CFD Which was Causing the Dramatic Slowdown on the A1200. Cut a Long Story Short I Really do need to Get a Command Shell and Amiga-Dos Guide. Like Windows for Dummies but Amiga Equivalent

03 June 2018, 18:10	#7
kgc210 Registered User Join Date: Jun 2016 Location: Stoke-On-Trent, England Posts: 450	I have not bought them or read them. So I can't comment on how good / useful they are but... https://amiga.net.pl/index.php?lng=e...=10010&tms=154 https://amiga.net.pl/index.php?lng=e...=10010&tms=236

03 June 2018, 18:18	#8
nathanm1991 Self Diagnosed Noob! Join Date: Apr 2018 Location: Malvern, Worcestershire Age: 32 Posts: 704	ooo I May have to Give these a Purchase Soon :-) Thank you

03 June 2018, 21:09	#9
daxb Registered User Join Date: Oct 2009 Location: Germany Posts: 3,304	For online reference you can try this: http://wiki.amigaos.net/wiki/AmigaOS_Manual:_AmigaDOS

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)