x86 Bridgeboard update (PCem core) - Page 5

Toni Wilen · 12 August 2018, 15:01

Another attempt, I think it really is correct now..

superfrog · 12 August 2018, 15:41

Quote:

Originally Posted by superfrog

PC Speaker On, Default Video Mono: Hear POST Beep on boot, get video output in PC Mono window; PC Color freezes silently after clicking Icon in WB, does not even open PC Window, have to reboot Amiga to recover
WinUAE.

Somehow my BB SW 2.0 files got corrupted or something during testing, and that's what was causing PC Color silent freeze in these teats

Working now with fresh re-install and latest Beta. Previous problems with switching between mono and color displays seem to be fixed. Thanks!

Toni Wilen · 12 August 2018, 16:37

One more feature: serial mouse (Microsoft protocol) in COM1 (IO=0x3f8, IRQ=4). This is currently always enabled and mapped to device that is mapped to Amiga mouse.

Not tested at all, need test disk/HDF with mouse driver included, I am not going to make it myself as usual

Becomes configurable later..

EDIT: SB Pro/16 test results would be nice too.

AnnaWu · 12 August 2018, 17:29

Quote:

Originally Posted by Toni Wilen

Another attempt, I think it really is correct now..

Thanks again. Looks good.

AnnaWu · 12 August 2018, 17:36

Quote:

Originally Posted by Toni Wilen

One more feature: serial mouse (Microsoft protocol) in COM1 (IO=0x3f8, IRQ=4). This is currently always enabled and mapped to device that is mapped to Amiga mouse.

Not tested at all, need test disk/HDF with mouse driver included, I am not going to make it myself as usual

It is not clear for me.
I still need the AMouse driver to work in Windows 3.x and Norton Commander.

Mouse Switch

Amiga: Left Amiga + P
PC : Insert + P

Toni Wilen · 12 August 2018, 18:01

You need to run dos mouse driver that supports Microsoft serial mouse. It may not work but I am not going to test until someone else finds proper driver..

EDIT: Windows may support it directly but dos needs testing first. Less unknown variables!

AnnaWu · 12 August 2018, 18:10

Quote:

Originally Posted by Toni Wilen

You need to run dos mouse driver that supports Microsoft serial mouse. It may not work but I am not going to test until someone else finds proper driver..

EDIT: Windows may support it directly but dos needs testing first. Less unknown variables!

Understand, I will test the CuteMouse driver v1.9 for DOS as example.
At moment I have another problem with your last version.
If I want use the Sound Blaster 1.0 I get a crash.

Toni Wilen · 12 August 2018, 18:15

Already fixed.

AnnaWu · 12 August 2018, 18:32

Quote:

Originally Posted by Toni Wilen

You need to run dos mouse driver that supports Microsoft serial mouse. It may not work but I am not going to test until someone else finds proper driver..

EDIT: Windows may support it directly but dos needs testing first. Less unknown variables!

Nice, CuteMouse driver v1.9 for DOS is working well.
Tested on Norton Commander.
On Windows 3.11 it is enough to install the correct driver.

AnnaWu · 12 August 2018, 18:41

Quote:

Originally Posted by Toni Wilen

Already fixed.

The PoP disk with the Sound Blaster 1.0 support is now ok.
But I found another problem, please wait ...

Zilog · 12 August 2018, 18:50

Hy Tony,
when start beta winuae crash.

Thanks.

AnnaWu · 12 August 2018, 18:55

Quote:

Originally Posted by AnnaWu

The PoP disk with the Sound Blaster 1.0 support is now ok.
But I found another problem, please wait ...

False alarm!

Toni Wilen · 12 August 2018, 19:16

Quote:

Originally Posted by Zilog

Hy Tony,
when start beta winuae crash.

Thanks.

You most likely has too old version. (and dump files are useless unless it is official beta)

AnnaWu · 12 August 2018, 19:25

Tested with PoP
Model:
Sound Blaster 1.0 OK
Sound Blaster 1.5 OK
Sound Blaster 2.0 OK
Sound Blaster Pro v1 OK
Sound Blaster Pro v2 OK
Sound Blaster 16 OK

AnnaWu · 12 August 2018, 19:32

Config file (*.uae)
win32.expansion_gui_page=sb_isa

If I use a specific Sound Blaster model, it it possible to specify it in the config file?

Addendum

Oh sorry, I see
sb_isa_rom_file=:ENABLED
sb_isa_rom_options=SB1,220,irq7,dma1,dbopl

Zilog · 12 August 2018, 19:37

Quote:

Originally Posted by Toni Wilen

You most likely has too old version. (and dump files are useless unless it is official beta)

I re-download a beta, but crash.
If start a configuration with winaue ufficial 4.0.1 don't crash.

(i don't actvided a x86 emulation, if A2000 base) without expantion card.

Toni Wilen · 12 August 2018, 19:52

Quote:

Originally Posted by Zilog

I re-download a beta, but crash.
If start a configuration with winaue ufficial 4.0.1 don't crash.

(i don't actvided a x86 emulation, if A2000 base) without expantion card.

It is still always sure you have old version because crash affected everything (crashed almost immediately). It is also normal to get old cached version.

EDIT: Your config works fine.

Zilog · 12 August 2018, 20:02

Quote:

Originally Posted by Toni Wilen

It is still always sure you have old version because crash affected everything (crashed almost immediately). It is also normal to get old cached version.

EDIT: Your config works fine.

I True.....is the cache.....now works!!! Thanks a lot.

AMIGASYSTEM · 12 August 2018, 20:39

Quote:

Originally Posted by AnnaWu

Understand, I will test the CuteMouse driver v1.9 for DOS as example.

CuteMouse on Win95 it does not seem to work as long as I'm not mistaken

Toni Wilen · 12 August 2018, 20:47

Quote:

Originally Posted by AMIGASYSTEM

CuteMouse on Win95 it does not seem to work as long as I'm not mistaken

Windows 95 should have built-in serial mouse support.

12 August 2018, 16:37	#83
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	One more feature: serial mouse (Microsoft protocol) in COM1 (IO=0x3f8, IRQ=4). This is currently always enabled and mapped to device that is mapped to Amiga mouse. Not tested at all, need test disk/HDF with mouse driver included, I am not going to make it myself as usual Becomes configurable later.. EDIT: SB Pro/16 test results would be nice too. Last edited by Toni Wilen; 12 August 2018 at 16:53.

12 August 2018, 19:32	#95
AnnaWu Registered User Join Date: Dec 2012 Location: Germany Posts: 561	Config file (.uae) win32.expansion_gui_page=sb_isa If I use a specific Sound Blaster model, it it possible to specify it in the config file? Addendum* Oh sorry, I see sb_isa_rom_file=:ENABLED sb_isa_rom_options=SB1,220,irq7,dma1,dbopl Last edited by AnnaWu; 12 August 2018 at 19:42.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
x86 Bridgeboard PC Speaker/SoundBlaster support?	superfrog	request.UAE Wishlist	30	09 August 2018 18:16
What is "x86 Bridgeboard VGA", and how does it work?	Narf the Mouse	support.WinUAE	7	22 January 2018 14:17
Indivision ECS core update 1.15	wmaciv	Amiga scene	8	02 May 2017 19:30
Bridgeboard emulation (x86 CPU, for example A2286)	GiuseppeC	support.WinUAE	627	16 November 2016 15:42
Minimig firmware/core update	Spellcoder	News	1	27 April 2008 23:02

12 August 2018, 15:01	#81
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Another attempt, I think it really is correct now..

12 August 2018, 18:01	#86
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	You need to run dos mouse driver that supports Microsoft serial mouse. It may not work but I am not going to test until someone else finds proper driver.. EDIT: Windows may support it directly but dos needs testing first. Less unknown variables!

12 August 2018, 18:15	#88
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Already fixed.

12 August 2018, 19:25	#94
AnnaWu Registered User Join Date: Dec 2012 Location: Germany Posts: 561	Tested with PoP Model: Sound Blaster 1.0 OK Sound Blaster 1.5 OK Sound Blaster 2.0 OK Sound Blaster Pro v1 OK Sound Blaster Pro v2 OK Sound Blaster 16 OK

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)