Configuration wont load filter settings

Leandro Jardim · 18 January 2016, 11:35

I am using the combo box named "Link" in the "Configurations" section of WinUAE dialog box to open automatically a host configuration every time I start my OS 3.9 setup and some games. But when WinUAE loads "linked" configurations the DirectX filter settings aren't loaded from the selected host configuration. It seems to not load also the I/O Ports settings, too.

And in the "Quickstart" section of the same dialog box, while WinUAE changes the Hardware setup accordingly when the model type is modified by the user, it forgets to update the host settings after the user clicks "Set configuration", and is always necessary to click on the "Host Configuration" combo box for WinUAE to update the GUI settings before to click on the "Start" button to begin the emulation. This bug is very old.

Toni Wilen · 21 January 2016, 21:01

Quote:

Originally Posted by Leandro Jardim

I am using the combo box named "Link" in the "Configurations" section of WinUAE dialog box to open automatically a host configuration every time I start my OS 3.9 setup and some games. But when WinUAE loads "linked" configurations the DirectX filter settings aren't loaded from the selected host configuration. It seems to not load also the I/O Ports settings, too.

Attach your example configs (both main and linked)

Quote:

And in the "Quickstart" section of the same dialog box, while WinUAE changes the Hardware setup accordingly when the model type is modified by the user, it forgets to update the host settings after the user clicks "Set configuration", and is always necessary to click on the "Host Configuration" combo box for WinUAE to update the GUI settings before to click on the "Start" button to begin the emulation. This bug is very old.

This seems to be design (specifically checks for it) but I don't have any if it is accidental or not...

Leandro Jardim · 21 January 2016, 23:51

Extract this archive in the WinUAE folder. This version of the linked config dont uses any thirdy-party Direct3D filter, it only uses a mask everyone should have.

23 February 2017, 19:47

I am having the same problem with filter settings. Any news?

Toni Wilen · 24 February 2017, 08:58

It looks like I am still waiting for example config files

Mclane · 24 February 2017, 10:55

Toni, charge up the Crystal Ball of knowledge, its seems some heads may need knocking

25 February 2017, 22:06

I solved the problem by creating new configs. Now they save the linked host correctly and keep the shader settings. Some of my configs were really old, so i guess they were causing this problem...

Leandro Jardim · 05 April 2017, 02:03

Quote:

Originally Posted by Toni Wilen

It looks like I am still waiting for example config files

Sorry Toni, I have deleted my config files and my entire emulators directory on my notebook. Retrogaming was taking too much time every day, and I wanted to use the time for little projects.

SquawkBox · 05 April 2017, 13:37

Just in case you've never come across that (somehow sweeping) statement :
One good thing about retrogaming having ruined our lives is that we have two extra left!

18 January 2016, 11:35	#1
Leandro Jardim Registered User Join Date: Nov 2009 Location: Legoland Age: 45 Posts: 1,461	Configuration wont load filter settings I am using the combo box named "Link" in the "Configurations" section of WinUAE dialog box to open automatically a host configuration every time I start my OS 3.9 setup and some games. But when WinUAE loads "linked" configurations the DirectX filter settings aren't loaded from the selected host configuration. It seems to not load also the I/O Ports settings, too. And in the "Quickstart" section of the same dialog box, while WinUAE changes the Hardware setup accordingly when the model type is modified by the user, it forgets to update the host settings after the user clicks "Set configuration", and is always necessary to click on the "Host Configuration" combo box for WinUAE to update the GUI settings before to click on the "Start" button to begin the emulation. This bug is very old. Last edited by Leandro Jardim; 18 January 2016 at 17:44.

21 January 2016, 23:51	#3
Leandro Jardim Registered User Join Date: Nov 2009 Location: Legoland Age: 45 Posts: 1,461	Extract this archive in the WinUAE folder. This version of the linked config dont uses any thirdy-party Direct3D filter, it only uses a mask everyone should have. Last edited by Leandro Jardim; 15 January 2017 at 17:59.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4000D Wont Load Workbench.	merlin1968	support.Hardware	5	15 July 2012 16:43
Lethal Xcess wont load!	trydowave	support.Games	7	05 March 2011 14:43
split up screen filter settings	zygzak	request.UAE Wishlist	0	24 October 2009 18:58
Filter Settings (16:9, 16:10, 15:9) inverted?	crusader86x	support.WinUAE	5	01 July 2009 22:41
Filter settings crashes	abelthorne	support.WinUAE	5	05 January 2004 19:49

23 February 2017, 19:47	#4
GCS Posts: n/a	I am having the same problem with filter settings. Any news?

24 February 2017, 08:58	#5
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,506	It looks like I am still waiting for example config files

24 February 2017, 10:55	#6
Mclane Old retro god. Join Date: Apr 2002 Location: Northolt, West London Age: 62 Posts: 857	Toni, charge up the Crystal Ball of knowledge, its seems some heads may need knocking

25 February 2017, 22:06	#7
GCS Posts: n/a	I solved the problem by creating new configs. Now they save the linked host correctly and keep the shader settings. Some of my configs were really old, so i guess they were causing this problem...

05 April 2017, 13:37	#9
SquawkBox Speedbump gimme goosebump Join Date: Feb 2016 Location: France Age: 50 Posts: 774	Just in case you've never come across that (somehow sweeping) statement : One good thing about retrogaming having ruined our lives is that we have two extra left!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)