RapidRoad USB starts shipping oct-20-2014 - Page 17

roomeo · 09 June 2015, 16:34

Quote:

Originally Posted by Dejavu

Rapidroad have worked with my below setup without any problem. I am using self powered hub between my usb peripherals and rapidroad.

it works with several usb mouses, external hardisks, card readers, usb sticks... flawlessly

now i am trying find a usb ethernet converter that supported by posedion software in Turkey, i have already purchased 3 but all refused to work.

Can anyone suggest an usb2ethernet product that has compatible chipset with the possedion?

Hi.

This is not helping your problem, but I can confirm that I have problems with an usb- eth adapter myself. The chipset is AX88772. Refuses to connect with Rapidroad and roadshow. When I use the x-surf roadshow connects normally.

The interesting thing here is that the same usb-eth adapter works fine on my a600 with subway. Using the same version of roadshow.
The a600.is using Poseidon 4.4 and the a4000 is using Poseidon 4.5. The problem could be the different Poseidon versions. Unlikely, but needs to be tested to be sure of course.

Br

roomeo · 10 June 2015, 00:11

Quote:

Originally Posted by roomeo

Hi.

This is not helping your problem, but I can confirm that I have problems with an usb- eth adapter myself. The chipset is AX88772. Refuses to connect with Rapidroad and roadshow. When I use the x-surf roadshow connects normally.

The interesting thing here is that the same usb-eth adapter works fine on my a600 with subway. Using the same version of roadshow.
The a600.is using Poseidon 4.4 and the a4000 is using Poseidon 4.5. The problem could be the different Poseidon versions. Unlikely, but needs to be tested to be sure of course.

Br

Ok... Installed Poseidon 4.5 on my a600 with subway, and roadshow connects normally. So the problem seems to be in rapidroad device driver In this particular problem.

Br

zharn · 10 June 2015, 07:18

c64 reloaded might be the problem

zharn · 29 June 2015, 00:57

Was this problem ever resolved?

utri007 · 30 June 2015, 23:19

Sorry if this has been asked before, but will x-surf version work with Buddha IDE controller clock port?

fitzsteve · 01 July 2015, 01:35

Quote:

Originally Posted by utri007

Sorry if this has been asked before, but will x-surf version work with Buddha IDE controller clock port?

No you need the clockport version

spudje · 01 July 2015, 11:02

Quote:

Originally Posted by zharn

Was this problem ever resolved?

Good question, guess Jens' attention shifted to AC500plus and Amiga Reloaded and add-on boards :/

zharn · 20 July 2015, 06:48

bump, still no news/updates?

spudje · 30 July 2015, 11:23

Would the issue be related to what tnt23 was facing (and I believe fixed) with his z3sdram card and the A3640. Don't ask me the technical details though.

zharn · 10 August 2015, 13:13

A factory stock a4000 with a3640 and rapidroad/x-surf is not a working combination yet?

sorry for the bump, but my a4000 wants usb

manic23 · 10 August 2015, 14:25

It sort of works but you need to run the xsurf in Zorro II mode or you'll get problems

zharn · 10 August 2015, 17:56

im not that lucky to get z2 mode, tried that

manic23 · 10 August 2015, 17:57

Working OK here in z2 mode what problems are you having?

zharn · 11 August 2015, 07:12

A3640 rev 3.1 used in both tests z2/z3 on xs100

rev b mainboard and rev 1 daughterboard.
rev b mainboard and rev b daughterboard.

Both boards get Same nak timeout (10) error.

Ive also tried mmu.library and different 68040.library, no change.

The rapidroad works fine in my 1200 via clockport, its twice as fast as the subway. But i didnt buy it for the 1200.

manic23 · 11 August 2015, 08:21

I've heard of these nak timeouts but to be honest I don't really understand what they are or how to see them and I have never seen any issues in my day to day usage on my a4000

zharn · 11 August 2015, 08:42

What cpu board are you using?

manic23 · 11 August 2015, 08:43

Warp engine 040

zharn · 11 August 2015, 12:08

Thats why it i suspect it works for you. I dont believe it was tested with a a3640

manic23 · 11 August 2015, 12:10

Possibly but I still need to run it in z2 mode or I get problems of crashing hanging ect

Don_Adan · 13 August 2015, 16:06

Quote:

Originally Posted by zharn

A3640 rev 3.1 used in both tests z2/z3 on xs100

rev b mainboard and rev 1 daughterboard.
rev b mainboard and rev b daughterboard.

Both boards get Same nak timeout (10) error.

Ive also tried mmu.library and different 68040.library, no change.

The rapidroad works fine in my 1200 via clockport, its twice as fast as the subway. But i didnt buy it for the 1200.

This is bug in rapidroadxs100usb.device by Chris Hodges.
I dissasembled this device, but I dont know which LVO cause
nak time error, I dont know poseidon.library error codes. This is perhaps easy to fix bug. For me init part of this device works OK.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New USB HID mouse / USB Joystick / Gamepad USB adapter for the classic Amiga	spidi	News	191	21 February 2021 19:18
WinUAE USB Amiga hard drive issue (2014)	JayEff	support.WinUAE	2	04 April 2014 18:31
BetterWb 3.0 06-OCT-2013	gulliver	News	20	06 November 2013 20:22
Away At Amiwest Show (Oct 20 - 26)	amigakit.com	MarketPlace	1	17 October 2010 23:16
Meet SAM @ ANT Oct 12th 2008 (UK)	Mikey_C	News	22	14 October 2008 13:52

10 June 2015, 07:18	#323
zharn Registered User Join Date: Nov 2012 Location: Brisbane Australia Posts: 150	c64 reloaded might be the problem

29 June 2015, 00:57	#324
zharn Registered User Join Date: Nov 2012 Location: Brisbane Australia Posts: 150	Was this problem ever resolved?

30 June 2015, 23:19	#325
utri007 mä vaan Join Date: Nov 2001 Location: Finland Posts: 1,653	Sorry if this has been asked before, but will x-surf version work with Buddha IDE controller clock port?

20 July 2015, 06:48	#328
zharn Registered User Join Date: Nov 2012 Location: Brisbane Australia Posts: 150	bump, still no news/updates?

30 July 2015, 11:23	#329
spudje Registered User Join Date: Dec 2014 Location: Netherlands Posts: 1,406	Would the issue be related to what tnt23 was facing (and I believe fixed) with his z3sdram card and the A3640. Don't ask me the technical details though.

10 August 2015, 13:13	#330
zharn Registered User Join Date: Nov 2012 Location: Brisbane Australia Posts: 150	A factory stock a4000 with a3640 and rapidroad/x-surf is not a working combination yet? sorry for the bump, but my a4000 wants usb

10 August 2015, 14:25	#331
manic23 Only Amiga! Join Date: Jan 2008 Location: London / UK Age: 53 Posts: 512	It sort of works but you need to run the xsurf in Zorro II mode or you'll get problems

10 August 2015, 17:56	#332
zharn Registered User Join Date: Nov 2012 Location: Brisbane Australia Posts: 150	im not that lucky to get z2 mode, tried that

10 August 2015, 17:57	#333
manic23 Only Amiga! Join Date: Jan 2008 Location: London / UK Age: 53 Posts: 512	Working OK here in z2 mode what problems are you having?

11 August 2015, 07:12	#334
zharn Registered User Join Date: Nov 2012 Location: Brisbane Australia Posts: 150	A3640 rev 3.1 used in both tests z2/z3 on xs100 rev b mainboard and rev 1 daughterboard. rev b mainboard and rev b daughterboard. Both boards get Same nak timeout (10) error. Ive also tried mmu.library and different 68040.library, no change. The rapidroad works fine in my 1200 via clockport, its twice as fast as the subway. But i didnt buy it for the 1200.

11 August 2015, 08:21	#335
manic23 Only Amiga! Join Date: Jan 2008 Location: London / UK Age: 53 Posts: 512	I've heard of these nak timeouts but to be honest I don't really understand what they are or how to see them and I have never seen any issues in my day to day usage on my a4000

11 August 2015, 08:42	#336
zharn Registered User Join Date: Nov 2012 Location: Brisbane Australia Posts: 150	What cpu board are you using?

11 August 2015, 08:43	#337
manic23 Only Amiga! Join Date: Jan 2008 Location: London / UK Age: 53 Posts: 512	Warp engine 040

11 August 2015, 12:08	#338
zharn Registered User Join Date: Nov 2012 Location: Brisbane Australia Posts: 150	Thats why it i suspect it works for you. I dont believe it was tested with a a3640

11 August 2015, 12:10	#339
manic23 Only Amiga! Join Date: Jan 2008 Location: London / UK Age: 53 Posts: 512	Possibly but I still need to run it in z2 mode or I get problems of crashing hanging ect

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)