English Amiga Board

Go Back   English Amiga Board > Support > support.Hardware

Thread Tools
Old 14 June 2012, 00:12   #1
altcomputing's Avatar
Join Date: Jan 2011
Location: Poland/Wroclaw
Age: 35
Posts: 76
CyberStorm MK1 060 problem - delay line chip heat and freezes


I have a problem with a phase5 CyberStorm060 CPU card. The card runs fine for 2-3 minutes, then start hanging up, and a few seconds later it goes into reset loop. I noticed that the DS1010S-50 delay line chip goes rather hot to touch, and as far as i know, it shouldn't.
This would explain hanging up, because from datasheets i read that it's delay lines may flow if temperature raises, so it crashes as soon as it's hot and lines go out of tune.
But why does it heat? I checked voltages and they are OK. The card otherwise works very well - if i put a radiator on this chip and blow a fan somewhere near, i manage to get stable operation for some time, depending on ambient temperature and type of fan. So heat is certainly a concern here.
Unfortunately, these chips are not available anywhere except for some suspicious chinese suppliers on the web. I couldn't scrap it from any of other boards i have.
So there's the question:
- Could somebody check temperature of DS1010S on his CyberStorm?
- Does anybody have one DS1010S spare (or compatible - 10 tap, 5ns/tap delay line)?
altcomputing is offline  
Old 17 November 2013, 22:57   #2
Registered User
cpiac64's Avatar
Join Date: Apr 2010
Location: Italy
Posts: 954
take ds1110s-50+
cpiac64 is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
For sale: CyberStorm 060 MK1 + SCSI module + 128 MB RAM jack-3d MarketPlace 2 10 June 2013 10:46
Cyberstorm mk1 SCSI LED? xc8 support.Hardware 3 28 November 2010 21:45
For Sale: CyberStorm MK1 060 keropi MarketPlace 2 20 January 2007 23:22
Cyberstorm MK1 - Compatible Processor THX1138 support.Hardware 3 22 December 2005 08:48
CyberStorm Mk1 and other amiga parts brknck MarketPlace 1 05 September 2002 11:46

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +2. The time now is 18:46.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.06341 seconds with 13 queries