Magnum Mk2 Question

Washac · 09 February 2010, 22:10

Hi All

Just fitted a Magnum Mk2 A1200 Processor Accelerator into my 1200, it works nice, 2Meg Chip Mem, 32Meg Other

Does anybody recall this Board at all and if it caused any problems ? I ask because the
trapdoor cover is very reluctant to fit without a slight bulge in it. I seem to recall that if
this board was fitted then you left the cover off as things would get quite hot anyway.

I think this board was rebadged as an Apollo.

Thanks for reading....

fitzsteve · 09 February 2010, 22:24

Quote:

Originally Posted by Washac

Hi All

Just fitted a Magnum Mk2 A1200 Processor Accelerastorinto my 1200, it works nice, 2Meg Chip Mem, 32Meg Other

Does anybody recall this Board at all and if it caused any problems, I ask because the
trapdoor cover is very reluctant to fit without a slight bulge in it. I seem to recall that if
this board was fitted then you left the cover off as things would get quite hot anyway.

Thanks for reading....

I don't have that card, I have a Typhoon MK2 but if I can't fit the trap door without it bulging so I've left it off. I've been using it like this for 3-4 months with no problems. My card gets pretty warm so I guess its nice to have the airflow.

Steve.

Washac · 09 February 2010, 23:03

Quote:

Originally Posted by fitzsteve

I don't have that card, I have a Typhoon MK2 but if I can't fit the trap door without it bulging so I've left it off. I've been using it like this for 3-4 months with no problems. My card gets pretty warm so I guess its nice to have the airflow.

Steve.

Hi

Just as I thought

09 February 2010, 22:10	#1
Washac Junior Member Join Date: Oct 2001 Location: UK Southern End Posts: 704	Magnum Mk2 Question Hi All Just fitted a Magnum Mk2 A1200 Processor Accelerator into my 1200, it works nice, 2Meg Chip Mem, 32Meg Other Does anybody recall this Board at all and if it caused any problems ? I ask because the trapdoor cover is very reluctant to fit without a slight bulge in it. I seem to recall that if this board was fitted then you left the cover off as things would get quite hot anyway. I think this board was rebadged as an Apollo. Thanks for reading.... Last edited by Washac; 09 February 2010 at 22:24.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Magnum 040 accelerator	JACK98	support.Hardware	33	13 July 2009 23:15
CSA Magnum 40/4 HD Prep - help!	chiark	support.Hardware	17	17 May 2008 16:11
Magnum joystick help	steve88	New to Emulation or Amiga scene	1	23 January 2008 01:21
Magnum MK2 030 - 50mhz, 32meg card!	ElectroBlaster	MarketPlace	3	24 June 2005 18:00
oxyd magnum	Unregistered	request.Old Rare Games	3	26 November 2001 08:54

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)