08 March 2009, 20:21 | #1 |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
Choices - Indivision with Pal or NTSC A1200
Hi all,
is there any benefits between using either a Pal or NTSC A1200 with the indivision (assuming your monitor can correctly display the VGA input ? Will NTSC and Pal games display correctly on the monitor (centred) and showing the full picture. Does the A1200 need to bestarted in either Pal/NTSC mode in order to get the desired results ? Thanks |
10 March 2009, 02:30 | #2 |
I hate potatos and shirts
|
Not if you are using WHDload. Even on a NTSC Amiga, it's just a matter of edit every game icon and the "PAL" tooltype on it.
Or add the PAL tooltype in the global WHDload prefs. |
10 March 2009, 04:09 | #3 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,646
|
I like native PAL machines, so I'd recommend that.
Sometimes I found no matter what tooltype I put in WHDLoad, some games don't work if I don't boot in the mode they need. Or just override my settings (you can't force NTSC on every game, for example) |
12 March 2009, 01:52 | #4 |
Registered User
Join Date: Sep 2007
Location: Melbourne/Australia
Posts: 4,400
|
I guess what he's asking is if the Indivsion will convert both the PAL and NTSC television signals to a common VGA signal in which case it doesn't matter if the game is running in PAL or NTSC.
|
12 March 2009, 04:04 | #5 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,646
|
His first question is if one is more recommended than the other
And the answer is simple: no. Choose whichever one you want. Indivision runs with both and converts both modes correctly! |
12 March 2009, 05:37 | #6 |
Vegetable Lasagna
Join Date: Mar 2007
Location: Toronto, CANADA
Age: 54
Posts: 711
|
Yet another reason I love my Indivision.
|
18 March 2009, 14:57 | #7 |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
I settled for the Pal motherboard with the Indivision. it seems that there are more native Pal games (WHDload/floppies) available than NTSC so why not use the same board i am assuming the Indivision was basically built and tested on. The display is awesome on my Samsung T245.
One bad thing is the HP chip Lisa, it does not give a definate snap when fitted and twice it has popped. I'm in the process of finding some double sided sticky spongy tape to try to keep it down. What are other people using who have this problem ? |
19 March 2009, 00:51 | #8 | |
Registered User
Join Date: Sep 2007
Location: Melbourne/Australia
Posts: 4,400
|
Quote:
|
|
19 March 2009, 03:32 | #9 |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
Hi there,
yup, it was actually pre-sanded when i got it, (a week ago) it has been sanded almost down to the pins and it still pops off, so it isnt a 100% fix. Thats why i'm curious to see what other people are doing, whether glueing or some other mens to prevent the popoffs |
19 March 2009, 05:04 | #10 |
Registered User
Join Date: Sep 2007
Location: Melbourne/Australia
Posts: 4,400
|
I've actually used super-glue to hold mine down but that was only because it had become a bit loose (caused by repeatedly taking it on and off which seems to push the pins back a little). The first one that I fitted to a different MB stayed put with just a bit of silicon at a couple of fixing points.
Last edited by NovaCoder; 23 March 2009 at 02:50. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PAL A1200 in NTSC-land. | Awol | New to Emulation or Amiga scene | 6 | 11 November 2010 22:38 |
Force NTSC on PAL a1200 | Dreamcast270mhz | Hardware mods | 5 | 21 December 2009 18:56 |
need confirmation for a1200 pal/ntsc | kipper2k | support.Hardware | 26 | 20 May 2009 13:00 |
PAL a1200 on a NTSC CRT display? | Foster | support.Hardware | 8 | 02 April 2009 19:53 |
A1200 PAL vs NTSC | JackTheKnife | support.Hardware | 3 | 09 February 2009 16:46 |
|
|