Instruction manual for A500 clockport adapter

coze · 07 February 2011, 08:54

Anybody have the instruction manual for the a500 clockport adapters ?

I need to know the orientation of the cable when installing a subway, and where the jumper wire should be connected to. (and which port is port 0 ?)

the website says manuals are moved to the product pages, but there'sn't any manual to be found on the product pages ...

http://www.jschoenfeld.com/products/a500clk_e.htm

Lockon · 07 February 2011, 10:01

Take a look at this close-up, that's my A500+ with clockport.

http://www.amiga.org/forums/album.ph...&pictureid=308

Port#0 is port closer to Denise, when clockport is installed into 68000 DIL socket.
(you'll also notice that lower Port#1 header contacts are pretty close to metal bottom plate of A500 keyboard when put in place; that's something worth of care).

Looking on the PCB markings, you'll also see 'VCC' and 'GND' markings - that points you where to set clockport cable with a red header wire.

amigoun · 19 May 2013, 01:45

So where to connect the wire of the clockport adapter? Has anybody a photo of it connected?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Contemplating clockport usb host adapter	hooverphonique	support.Hardware	12	20 December 2013 13:16
A500 Clockport Adaptor Troubleshooting Recommendations	Smakar	support.Hardware	2	04 October 2012 22:32
Zorro II adapter for A500	amiman99	support.Hardware	2	06 May 2011 05:07
A500 service manual, technical reference manual	a500l0ver	request.Other	2	26 September 2008 14:06
A600 Clockport adapter	Smiley	MarketPlace	0	03 July 2007 18:47

07 February 2011, 08:54	#1
coze hastala vista winny vista Join Date: Feb 2006 Location: mt fuji Age: 46 Posts: 1,335	Instruction manual for A500 clockport adapter Anybody have the instruction manual for the a500 clockport adapters ? I need to know the orientation of the cable when installing a subway, and where the jumper wire should be connected to. (and which port is port 0 ?) the website says manuals are moved to the product pages, but there'sn't any manual to be found on the product pages ... http://www.jschoenfeld.com/products/a500clk_e.htm

07 February 2011, 10:01	#2
Lockon Air supremacy Join Date: Aug 2008 Location: Rijeka Croatia Age: 49 Posts: 121	Take a look at this close-up, that's my A500+ with clockport. http://www.amiga.org/forums/album.ph...&pictureid=308 Port#0 is port closer to Denise, when clockport is installed into 68000 DIL socket. (you'll also notice that lower Port#1 header contacts are pretty close to metal bottom plate of A500 keyboard when put in place; that's something worth of care). Looking on the PCB markings, you'll also see 'VCC' and 'GND' markings - that points you where to set clockport cable with a red header wire.

19 May 2013, 01:45	#3
amigoun Registered User Join Date: May 2010 Location: Czech Rep Posts: 599	So where to connect the wire of the clockport adapter? Has anybody a photo of it connected?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)