FS-UAE standalone USB

[AMIGASYSTEM]

@ Sinphaltimus
I had already mentioned the problem on file config and I do not think it was a file protected by writing, i have solved "eliminating the text" and then pasting the text again, or by creating a new file.

@ Dunny
From how much time do not use IcarOS?

[Dunny]

Originally Posted by AMIGASYSTEM

@ Sinphaltimus
I had already mentioned the problem on file config and I do not think it was a file protected by writing, i have solved "eliminating the text" and then pasting the text again, or by creating a new file.

@ Dunny
From how much time do not use IcarOS?

About 3 months ago. I have four laptops that I'd like to get the Amiga experience on. Amithlon is a no-go for all of them (they have too much RAM and no way to disable it) and AROS (IcarOS flavour) cannot use the correct screen resolution on any of them (1024x768 only, and they're all widescreen) and no 2D hardware acceleration either which means that even something as simple as dragging a window means you can watch it drawing the pixels as it updates.

IcarOS on a core i5 with 8GB of RAM takes about 6 minutes to boot, whereas Win10 takes about 2 minutes, and Amilator takes 35 seconds.

So I've moved over to Amilator, which is actually better than IcarOS.

And that means that I don't have to bother with AROS ever again - I have an actual Amiga (to all intents and purposes) now that's really, really fast.

[AMIGASYSTEM]

Also I have found my Amiga 4000/060 con AFA_OS ma AROS, if you have a PC with compatible hardware AROS it's very fast the system loads in a few seconds, OWB it's fast, you can watch Youtube videos directly, play with 3D games. I created my own configuration starting from the nightly builds, this:

[ Show youtube player ]

[tmello]

Hello,
How can i change the Amilator to 50Hz for smooth scrolling. Xorg.conf?

[nobody]

Open source drivers don't support screen mode tweaking, at least there is very little chance to work. You would need a proprietary driver from manufacturer and tweaking inside OS driver options environment for your specific monitor (naming, maximum resolution and refresh rate).

[nobody]

For smooth scrolling on a 60hz monitor add these lines to configuration

ntsc_mode=1
vsync=1

Unfortunately I found out that it will remove some lines vertically so some games using all screen will not be visible. Also some whdload games don't start.

[Retro-Nerd]

Of course not all PAL games are NTSC compatible out of the box. And it cuts the bottom of the image when you force specific PAL games into the lower NTSC resolution.

[nobody]

Yeah but whatever runs its amazing fun to play. I got hooked to stormlord a game I wouldn't touch if it had jerky scrolling besides being ultra hard.

[amigo-mexicano]

I have a problem. Once the emulation starts, I don't have keyboard and mouse input. They completely die after the AMIGA intro screen. There it works to select memtest, but after that, completely dead, so I can't do nothing.

I've tried different USB sticks, and different kick.rom files, same result. Once the amiga screen shows up, there is no keyboard and mouse input.

What can I do??

Thanks

*EDIT* I was using 4.15 version, author uploaded a new version here, works OK: http://eab.abime.net/showpost.php?p=...4&postcount=12