Which power supply for Mediator PCI 1200 TX?

[NeoHippie2016]

Help! I own an Amiga 1200 in an Micronik Infinitiv Tower with an Blizzard 040/PPC (256 MB Fast) and plan to buy to myself a Mediator PCI 1200 TX from Elbox incl. Radeon or Voodoo 3, Soundblaster and Spider USB. If somebody can maybe say me what kind of power supply I need! I know only that I need a AT or ATX power supply of 320 watts! Does somebody maybe know advice?

[johnim]

Hi

You can use either but the atx will be a new psu vs finding an old at psu

If you go atx you need a wire to you button to turn it on

http://www.elbox.com/products/extra_...i_1200_tx.html right of picture

http://www.elbox.com/news_08_02_22.html

[NeoHippie2016]

@johnim: How about that? https://www.conrad.de/de/pc-netzteil...160704205605:s

[Daedalus]

Wow, they're hard to find these days! Yes, that should work fine, I'm still using an ancient 230W AT PSU in my A1200 tower with a fully loaded Mediator and lots of drives. You would probably find an ATX one cheaper however... This one for example is a good quality, basic power supply and should be far quieter than that AT one when in use.

[Zooup1972]

http://amigakit.leamancomputing.com/...products_id=97

[NeoHippie2016]

Finally, I get around again to writing, even if only briefly! The Voodoo 3 (AGP) is on it's way. The Radeon with Mediator PCI and Soundblaster are on the way. Therefore are absent approx. another 4 items which I get only to the month change, because, all in all, a lot of money costs. I am talked with TheoTheoderich (a1k.org) , the installation (first that of the Voodoo, if this does not fit in the Tower, installation of the Radeon) photographically. And therefore these pictures on a1k and eab to uploaded it. What do you mean? (Translatorsoftware used! ;-)