29 June 2009, 21:59 | #1 |
Its hard being famous!
Join Date: Aug 2008
Location: Gateway to the dales, UK
Age: 43
Posts: 633
|
How do I get the best WB performance?
Now that I have my 68030 /40Mhz Apollo card how do I tune Workbench for maximum performance?
I have 3.0 Roms - Can I run OS3.5? How do I make sure all caches are on? Can I boot from my drive if I convert it to SFS? Can I relocate my kickstart into Fast Mem? Any libraries optimised for 68030 that improve performance? Other suggestions? Currently running in 640x512x32 screenmode and using ClassicWB ADVSP as a base. Cheers Rabbit |
29 June 2009, 22:44 | #2 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,789
|
Your getting quite a setup Rabbit80
Id recomend OS3.5 -people always say its slow but ive found quite the opposite, very smooth and get the dockbar from 3.9. OS3.5 is designed for 3.1 Roms - unless your going to upgrade your kickstart chip you can Skick into 3.1 roms, this should be easy if youve got all your kickstarts setup for WHDload you only need to download Skick from Aminet. Or you can use the Tool SetVersion to run OS3.5 on 3.0 roms Caches try ADos command Avail. Also if you havent got a scandoubler MagicTV |
29 June 2009, 23:03 | #3 |
Longplayer
|
OS3.5 is only slower due to the higher bitplane requirement for the colors. Will be just as fast if you set it to basic (horrid) 4 colors. Amidock is cause of major slow down in os 3.9 as it is constantly refreshing its icons (noticable more on AGA output). Quit it and you get quite a chunk of memory and speed back.
NewWPA8 is an OS patch that should be part of any fresh wb install as it does so much good on AGA output. |
29 June 2009, 23:16 | #4 |
Its hard being famous!
Join Date: Aug 2008
Location: Gateway to the dales, UK
Age: 43
Posts: 633
|
Why would I need a scandoubler?
|
29 June 2009, 23:30 | #5 |
PSPUAE DEV
|
|
29 June 2009, 23:43 | #6 |
Its hard being famous!
Join Date: Aug 2008
Location: Gateway to the dales, UK
Age: 43
Posts: 633
|
What does it do? Why would I need it? - My LCD does not flicker (according to the manual it has an integrated de-interlacer)
|
30 June 2009, 00:36 | #7 |
move.l #$c0ff33,throat
Join Date: Dec 2005
Location: Berlin/Joymoney
Posts: 6,863
|
|
30 June 2009, 00:40 | #8 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,789
|
|
30 June 2009, 01:00 | #9 |
Its hard being famous!
Join Date: Aug 2008
Location: Gateway to the dales, UK
Age: 43
Posts: 633
|
So what CPU command shall I add to my startup-sequence?
|
30 June 2009, 01:02 | #10 |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
What's the complete brand/name of your LCD TV? Is the image perfectly without flickering in 640x512 resolution and with RGB->SCART connection?
|
30 June 2009, 01:06 | #11 |
PSPUAE DEV
|
|
30 June 2009, 01:07 | #12 | |
Its hard being famous!
Join Date: Aug 2008
Location: Gateway to the dales, UK
Age: 43
Posts: 633
|
Quote:
The image is 100% rock steady - not a hint of flicker! Kind of like a (ever so slightly blurry) photograph! |
|
30 June 2009, 01:08 | #13 | |
PSPUAE DEV
|
Quote:
MagicTV works on CRT's fine, as I used to use it on my standard CRT TV all the time. It done the job fine. |
|
30 June 2009, 01:12 | #14 |
Its hard being famous!
Join Date: Aug 2008
Location: Gateway to the dales, UK
Age: 43
Posts: 633
|
Will skick work with my ROMs? they are from AF2008
|
30 June 2009, 01:20 | #15 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,789
|
If they work with WHDload - download Skick click on the icon, this will bring up a GUI and list avalible kickstarts
I think ill have to get an LCD - do games look good on the LCD? -do they blur when scrolling Try what StingRay said 'CPU cache burst' or type CPU ? for all commands ive only used this to help run a few CD32 games Last edited by Retro1234; 30 June 2009 at 01:28. |
30 June 2009, 01:44 | #16 | |
Its hard being famous!
Join Date: Aug 2008
Location: Gateway to the dales, UK
Age: 43
Posts: 633
|
Quote:
My advice with LCD is to get a 100Hz model - much smoother and less blurry. They are not quite as sharp as CRT when scrolling, but not exactly awful either I'll look into the CPU command - i guess if i softkick, I won't need to use FASTROM on that? How do I upgrade my ClassicWB install to OS3.5? Do I have all the software I need with my AF2008 CD? |
|
30 June 2009, 01:52 | #17 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,789
|
Ok cool - My brothers got an LCD ill test on his first. Let me know how it goes, ive never tried FASTROM but I could never get the Rom to load into fast with Skick and when the rom was in Chip I got a lot of slowdown You might not have these problems - but thats why I use 3.5 on 3.0 roms using SetVersion.
|
30 June 2009, 10:25 | #18 | |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
Quote:
PLEASE STOP TO REPORT LCDs DON'T FLICKER!!! I'm interested in a 15" / 17" / 19" LCD monitor to connect with an AMIGA RGB -> SCART cable able to display 640x256 AND 650x512 with 100% rock steady image on my basic A1200 (without scandoubler and/or flickerfixer). Perhaps I don't know/understand the meaning of "flicker", but I can confirm you that my LG LCD Monitor / TV has 99% rock steady image in 640x256 (100% is in 1084S / M1438S / M1538S Amiga monitor) and unfortunately everybody can see differences and flashing screen in 640x512. In this last resolution you can use it only for a few minutes. ...SO PLEASE STOP TO REPORT LCDs DON'T FLICKER!!! Probably it depends on the brand / model. Mine does in 640x512, so I'm searching for other models. About MagicTV I know it. It does the job but NOT enough fine (and it is limited in colours number). A 100% rock steady image is other... |
|
30 June 2009, 11:49 | #19 | |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,004
|
Quote:
On CRT TVs you could simply buy a 100Hz one and it would not flicker. There are 100Hz LCD TVs, too, but 100Hz technique for LCDs means something different than for CRTs. I don't know if 100Hz for LCD does automatically imply a deinterlacer. |
|
30 June 2009, 12:23 | #20 | ||
Its hard being famous!
Join Date: Aug 2008
Location: Gateway to the dales, UK
Age: 43
Posts: 633
|
Quote:
Which is why I said that my TV has built in de-interlacer according to the manual... Quote:
|
||
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
network performance tests | Schoenfeld | request.Other | 12 | 14 September 2023 17:01 |
Stuttering and slow performance | 8bitbob | support.WinUAE | 8 | 04 November 2012 21:42 |
PSPUAE Performance | tonyyeb | support.OtherUAE | 73 | 27 January 2011 16:45 |
performance issues in some games?! | trydowave | support.WinUAE | 3 | 09 January 2011 19:22 |
Which one would likely result in potentially better performance? | Maren | support.WinUAE | 3 | 02 January 2011 08:32 |
|
|