HD not showing up in OS 3.9

B14ck W01f · 21 January 2015, 08:07

I just set up an OS3.9 system that is to have two hard drives. I have a 120MB Workbench drive (DH0

and a 8GB Work drive (DH1

. However, DH1: never shows up on the desktop, and using the Mounter program does not seem to do anything. Both my hard drives are RDB-enabled.

I have set up a similar system before with no problems, but I wasn't using Beta 4 back then. To be fair, I partitioned the WB drive under 3.1 and then installed it directly from that version.

EDIT: The last screenshot isn't really accurate. Since then, I deleted the existing file system and re-added FastFileSystem so that the identifier is 0x444F5301.

Toni Wilen · 21 January 2015, 08:27

Standard answer: winuaelog.txt needed. It shows much more (useful) information than screenshots. (load your config, paths panel -> full logging, start, boot to wb, wait 5 seconds, f12, paths panel, winuaelog.txt, attach it)

thomas · 21 January 2015, 08:42

Quote:

Originally Posted by B14ck W01f

I just set up an OS3.9 system that is to have two hard drives. I have a 120MB Workbench drive (DH0:) and a 8GB Work drive (DH1:). However, DH1: never shows up on the desktop

Probably the usual user error: you didn't check if the 120MB drive needs to save changes after adding the 8GB drive.

B14ck W01f · 21 January 2015, 09:30

Quote:

Originally Posted by Toni Wilen

Standard answer: winuaelog.txt needed. It shows much more (useful) information than screenshots. (load your config, paths panel -> full logging, start, boot to wb, wait 5 seconds, f12, paths panel, winuaelog.txt, attach it)

Done.

B14ck W01f · 21 January 2015, 10:09

Quote:

Originally Posted by thomas

Probably the usual user error: you didn't check if the 120MB drive needs to save changes after adding the 8GB drive.

Doh, I double-checked and forgot to do this. Thanks, thomas.

21 January 2015, 08:07	#1
B14ck W01f m68k all the way Join Date: Aug 2011 Location: Koalaland Posts: 523	HD not showing up in OS 3.9 I just set up an OS3.9 system that is to have two hard drives. I have a 120MB Workbench drive (DH0 and a 8GB Work drive (DH1. However, DH1: never shows up on the desktop, and using the Mounter program does not seem to do anything. Both my hard drives are RDB-enabled. I have set up a similar system before with no problems, but I wasn't using Beta 4 back then. To be fair, I partitioned the WB drive under 3.1 and then installed it directly from that version. EDIT: The last screenshot isn't really accurate. Since then, I deleted the existing file system and re-added FastFileSystem so that the identifier is 0x444F5301. Attached Thumbnails Last edited by B14ck W01f; 21 January 2015 at 08:13.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Not all Games showing	manic23	support.FS-UAE	11	31 March 2014 20:13
Why are my partitions not showing up?	-Acid-	Amiga scene	20	05 February 2013 14:43
Signature not showing on my posts	spanner	project.EAB	1	01 July 2012 18:28
WINUAE only showing 3 partitions	TronPlayer	support.WinUAE	0	12 November 2010 23:28
A500 not showing colour	Traquer	support.Hardware	11	29 August 2006 10:42

21 January 2015, 08:27	#2
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,505	Standard answer: winuaelog.txt needed. It shows much more (useful) information than screenshots. (load your config, paths panel -> full logging, start, boot to wb, wait 5 seconds, f12, paths panel, winuaelog.txt, attach it)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)