Genesis!

Heavyweight7t6 · 29 May 2006, 20:18

Howdies!
Just got my A4066 into my A4K! (along with toccata!)
Hit abit of a problem. I can ping my miggy from my peecee, but cannot browse the web!.

I have configured the A4066 with an IP of 192.168.0.88 the destination is set to 192.168.0.1, gateway is also set to 192.168.0.1 and subnet mask is set to 255.255.255.0 -

My router is atm assigning IP's - anyone know where im going wrong!

192.168.0.1 is the router btw..

keropi · 29 May 2006, 20:42

perhaps u need to check the router's firewall settings?

patrik · 29 May 2006, 20:53

The destination address should only be set for point-to-point interfaces, like serial PPP/SLIP, so remove that one.

You also need to set a nameserver, or else hostname-lookups will not work - meaning that you can only access hosts via ip-addresses. The ip of router will most likely work fine as most routers acts as a nameserver-forwarder. If not, use the regular nameserver(s) of your isp.

On your router, you might need to limit the range for the addresses it automatically assigns via dhcp and set the Amiga, which uses a static address to an address outside this range.

If you have done all this and it still isn't working, you can see if you can access the internet at all, by pinging the ip of www.google.com - 66.249.93.99. If that works, the only problem you are having is that your nameserver(s) aren't working.

jrom · 29 May 2006, 23:16

Yeah... sounds to me like you forgot to enter the DNS entries.

29 May 2006, 20:18	#1
Heavyweight7t6 Junior Member Join Date: Oct 2004 Location: Cardiff / Wales Age: 47 Posts: 161	Genesis! Howdies! Just got my A4066 into my A4K! (along with toccata!) Hit abit of a problem. I can ping my miggy from my peecee, but cannot browse the web!. I have configured the A4066 with an IP of 192.168.0.88 the destination is set to 192.168.0.1, gateway is also set to 192.168.0.1 and subnet mask is set to 255.255.255.0 - My router is atm assigning IP's - anyone know where im going wrong! 192.168.0.1 is the router btw..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Return to Genesis	shutter	request.Old Rare Games	7	31 October 2014 17:53
Genesis World	mai	request.Old Rare Games	2	15 August 2012 18:21
Land of Genesis + more	JohnnyBeGood	MarketPlace	11	11 November 2007 13:06
AMIGA VS Genesis	ST Dragon	Retrogaming General Discussion	38	23 March 2005 18:16
Land of Genesis	PiCiJi	request.Old Rare Games	4	28 September 2004 00:26

29 May 2006, 20:42	#2
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	perhaps u need to check the router's firewall settings?

29 May 2006, 20:53	#3
patrik Registered User Join Date: Jan 2005 Location: Umeå Age: 43 Posts: 922	The destination address should only be set for point-to-point interfaces, like serial PPP/SLIP, so remove that one. You also need to set a nameserver, or else hostname-lookups will not work - meaning that you can only access hosts via ip-addresses. The ip of router will most likely work fine as most routers acts as a nameserver-forwarder. If not, use the regular nameserver(s) of your isp. On your router, you might need to limit the range for the addresses it automatically assigns via dhcp and set the Amiga, which uses a static address to an address outside this range. If you have done all this and it still isn't working, you can see if you can access the internet at all, by pinging the ip of www.google.com - 66.249.93.99. If that works, the only problem you are having is that your nameserver(s) aren't working.

29 May 2006, 23:16	#4
jrom Wannabe asm coder ;) Join Date: May 2002 Location: The Netherlands Age: 47 Posts: 459	Yeah... sounds to me like you forgot to enter the DNS entries.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)