ReAmiga 3000 Progress - Page 2

PR77 · 25 February 2019, 14:08

Quote:

Originally Posted by zero

Personally I enjoy doing layouts. It's quite a challenge to do by hand with such a complex board.

Fancy helping me with a layout? I don't get so much pleasure with laying out PCBs.

Chucky · 25 February 2019, 14:51

Quote:

Originally Posted by zero

The schematics are well understood though, so all the issues have been found now.

I'm just trying to understand the goal of the project. Is there a shortage of A3000 motherboards or something? Or is it just for fun?

Personally I enjoy doing layouts. It's quite a challenge to do by hand with such a complex board.

Well simply:

1. there are LOTS of dead A3000 out there due to batteryleakage. they need a pcb replacement to run nicly again. you can fix it with juperwires etc. but there is still shit from the battery slooowly eating more copper..

2. by doing this. we will also have data similiar to the AmigaPCB site, so you can follow up traces helping repairs being done

3. well why not. I need a new pcb. so I do it. if someone else have use for it.. doubleYAY!

1NOM155 · 25 February 2019, 15:15

After your tests Chucky I'll need one board 1:1 or a newer "Chucky" revision

zero · 26 February 2019, 10:05

Quote:

Originally Posted by PR77

Fancy helping me with a layout? I don't get so much pleasure with laying out PCBs.

Yes, I would enjoy that. PM me!

Wayne123 · 28 February 2019, 05:25

Very nice project, I too have a A3000 that could use a new motherboard.

Liqourice · 01 March 2019, 23:25

I wish I had that kind of patience.

appleiiguy · 02 March 2019, 14:20

My 3000 has battery damage also... Could use a MB swap. Wonder if the ReAmiga 3000 will have INT2 mod on the CPU slot...

Chucky · 02 March 2019, 14:21

Yes INT2 will be even on the 1:1 testcopy..
then what changes will be done on the ReAmiga one. that we havt to see.

lesta_smsc · 08 March 2019, 12:30

I know one person in particular is looking forward to the final result so he can start with restoring his A3000 collection... you do too Chucky

Chucky · 28 March 2019, 20:49

Here is a real sneakpeak of my A3000 project.
Here you can see components etc. Do check if you can find issues. (if you are brave enough to follow traces THEN I am impressed

)

Componentlocator:
http://www.hertell.nu/locatortest/lo...project=A3000D

Highresolution render:
http://www.hertell.nu/files/A3000Render.GIF

Chucky · 08 April 2019, 15:40

Arrived today!

Chucky · 08 April 2019, 15:42

Due to brain-meltdown I wrote the wrong revisionnumber on the board!

talybont · 08 April 2019, 16:08

I'm speechless, amazing work!

1NOM155 · 08 April 2019, 17:12

Quote:

Originally Posted by talybont

I'm speechless, amazing work!

indeed.

congrats Chucky

mech · 08 April 2019, 19:31

Nice work Chucky, what revision is it based on 9/02 9/03?

Chucky · 08 April 2019, 19:53

9/03..

wrong text on board

will be Rev 9.4 on release version

(as INT2 is done)

Magic · 09 April 2019, 04:04

Amazing!

@Chucky

I have a damaged A3000T motherboard that I might be willing to let you have in trade if you are interested.

Chucky · 09 April 2019, 07:38

Well I will NOT do a reverse of the tower pcb

1NOM155 · 10 April 2019, 17:59

Quote:

Originally Posted by Chucky

9/03..

wrong text on board

will be Rev 9.4 on release version

(as INT2 is done)

Chucky in your tests did you found anything to solve in the next revision?

regards

lesta_smsc · 10 April 2019, 18:12

Now the real test of putting components on and firing it up

09 April 2019, 04:04	#37
Magic Registered User Join Date: Aug 2007 Location: USA Posts: 360	Amazing! @Chucky I have a damaged A3000T motherboard that I might be willing to let you have in trade if you are interested. Last edited by Magic; 09 April 2019 at 04:09.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The ReAmiga 1200 Rev 1.0	Chucky	Hardware mods	60	18 August 2019 16:31
ACA2000 Progress?	Robbie	Amiga scene	7	17 December 2016 19:11
Work in progress.	Cowcat	Coders. General	7	18 February 2014 22:33
My A500+ progress so far.	Mogsy	Hardware pics	16	02 March 2013 09:20
My A1200 progress	ck1200	Hardware mods	19	07 October 2010 18:29

25 February 2019, 15:15	#23
1NOM155 Registered User Join Date: Apr 2015 Location: Lisbon Posts: 65	After your tests Chucky I'll need one board 1:1 or a newer "Chucky" revision

28 February 2019, 05:25	#25
Wayne123 Registered User Join Date: Sep 2015 Location: So. California, USA Age: 64 Posts: 62	Very nice project, I too have a A3000 that could use a new motherboard.

01 March 2019, 23:25	#26
Liqourice Registered User Join Date: Jul 2018 Location: Stockholm / Sweden Posts: 107	I wish I had that kind of patience.

02 March 2019, 14:20	#27
appleiiguy Registered User Join Date: Mar 2019 Location: Portland / USA Posts: 1	My 3000 has battery damage also... Could use a MB swap. Wonder if the ReAmiga 3000 will have INT2 mod on the CPU slot...

02 March 2019, 14:21	#28
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	Yes INT2 will be even on the 1:1 testcopy.. then what changes will be done on the ReAmiga one. that we havt to see.

08 March 2019, 12:30	#29
lesta_smsc Registered User Join Date: Feb 2012 Location: United Kingdom Posts: 3,175	I know one person in particular is looking forward to the final result so he can start with restoring his A3000 collection... you do too Chucky

28 March 2019, 20:49	#30
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	Here is a real sneakpeak of my A3000 project. Here you can see components etc. Do check if you can find issues. (if you are brave enough to follow traces THEN I am impressed ) Componentlocator: http://www.hertell.nu/locatortest/lo...project=A3000D Highresolution render: http://www.hertell.nu/files/A3000Render.GIF

08 April 2019, 15:40	#31
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	Arrived today!

08 April 2019, 15:42	#32
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	Due to brain-meltdown I wrote the wrong revisionnumber on the board!

08 April 2019, 16:08	#33
talybont Registered User Join Date: Oct 2016 Location: Norway Posts: 170	I'm speechless, amazing work!

08 April 2019, 19:31	#35
mech Registered User Join Date: Mar 2009 Location: texas,usa Posts: 235	Nice work Chucky, what revision is it based on 9/02 9/03?

08 April 2019, 19:53	#36
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	9/03.. wrong text on board will be Rev 9.4 on release version (as INT2 is done)

09 April 2019, 07:38	#38
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	Well I will NOT do a reverse of the tower pcb

10 April 2019, 18:12	#40
lesta_smsc Registered User Join Date: Feb 2012 Location: United Kingdom Posts: 3,175	Now the real test of putting components on and firing it up

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)