picasso 96?

06 November 2001, 17:21

anyone has an adf file of picasso 96?

CodyJarrett · 06 November 2001, 17:52

You can find Picasso 96 at the Aminet here:

http://uk.aminet.net/pub/aminet/gfx/board/Picasso96.lha
http://uk.aminet.net/pub/aminet/gfx/...casso96.readme

You can unpack it with LHA here:

http://uk.aminet.net/aminet/dirs/ami...rc/lha150r.run
http://uk.aminet.net/aminet/dirs/ami...lzxkeyfile.lha

There's no need to post in multiple sections of the board, as we will read all new messages.

06 November 2001, 21:48

thabk you for the links.I guess I'll have to do it under windows.Hope it works thanks again

Sorry for the multiple posts

Paul · 07 November 2001, 11:00

I have converted the lha of Picasso 96 into a zip file for you.

1. Download winzip file from the zone.
2. Open the winzip file in windows.
3. Click extract and select i.e. C:\Program Files\WinUAE\Harddrives
4. Click extract button.
5. Close winzip.
6. Run Winuae and load you config file.
7. Now click on Hard Drives tab.
8. Click Add Directory and select the Picasso96 directory [where you unziped the file to i.e. C:\Program Files\WinUAE\Harddrives\Picasso96] then give a volume name e.g. Picasso96 and click ok.
9. Goto configurations and save the new config.
10. Click O.K. to run workbench.
11. A new disk icon will show so click on it to open.
12. Run install.

N.B. Backup workbench before you attempt this. Also you can only use UAEGFX.

Paul · 07 November 2001, 11:07

Now in THE ZONE.

If you give up you can cheat by using AIAB

07 November 2001, 14:27

Thank you paul

for your efford and help. I admitt, it was difficult tom ake all those extractions. Well I; ll download your file and try it at once

Thanks again, oh by the way downloading AIAB and intalling it, prevents you from using other configurations or not?
Thanks again

RetroMan · 07 November 2001, 16:17

Quote:

Originally posted by akis
.... by the way downloading AIAB and intalling it, prevents you from using other configurations or not?

You can still use as much other configs as you wish to use

Paul · 07 November 2001, 16:29

On my system I have a config for AIAB.
A config with my own HD setup of WB 3.1.
Ians A500 config

And a basic A600HD config.

They all run with no problems, I just share the 2 games directories and the programs directory. So as RetroMany said.

Quote:

You can still use as much other configs as you wish to use

08 November 2001, 01:32

Thank you both for your help

I tried to install the picasso96 files,but something went wrong.When I tried to use a screen with the picasso, it said there were no mods or something,and it altered my workbench configuration so now everytime I boot up with an old HD conf file, in the beggining shows a screen that says something about picasoo not being able to find something and then boots up, which is a bit annoying and I will have to reinstall my workbench
Anyway I'll keep on trying till I find what I do wrong,but I will back up my files this time
Thank you both

Paul · 08 November 2001, 10:27

Are you using Winfellow? if you are then that your problem.

Picasso96 only works with Winuae.

Could you give AIAB a try at http://aiab.emuunlim.com/ as it will save you this Headache. This is a good package for beginners as it has step by step instructions on how to set it up. Also AIAB has Picasso96 included.

N.B. Remember to

1. back up everything.

2. You must use a KickStart 3 rom and have a Workbench 3.1 adf disk image to use AIAB.

If you were not using a KickStart 3 rom and Workbench 3.1 this could be another reason why you are having Picasso96 problems. I will have a try with WB 2.1 to verify this.

Paul · 08 November 2001, 10:49

This is what you get if you use Winfellow or if you use the wrong display drivers. You must only install the uaegfx driver.

Paul · 08 November 2001, 10:52

Yes just tested it, you can only use OS 3+

08 November 2001, 17:43

quote:
Are you using Winfellow?
Nop I use win UAE various versions
quote:
If you were not using a KickStart 3 rom and Workbench 3.1 this could be another reason why you are having Picasso96 problems.
Nop I do use kick 3.0 and workbench 3.1
I do get the first image you have attached Paul but under the winUAE, never used Winfellow. I must have used the wrong drivers,but for now I can't seem able to find the right one.
It's time to try the AIAB this time and I will get back with picasso96 after that.I won't give up!!

Thank you

Paul · 09 November 2001, 10:39

Just remembered something.

Check the 'Workbench:Devs/Monitors' dir and move the monitors into the storage dir.

You should leave just
Uaegfx
Pal
Ntsc

remove all other.

This should solve your problem if you do not want to use AIAB.

Let me know how you get on.

09 November 2001, 22:24

Thank you paul.I just succedded with the AIAB thing,now I will deal with the picasso, I used to get along well with my amiga untill I tried to put her in a tower,unfortunatelly,ruined.An emulator thing won't stop me

Thanks I'll keep you posted

Paul · 10 November 2001, 09:44

NO STOP:eek

There is NO need to install picasso 96 as AIAB has it preinstalled.

You Only need to Install picasso 96 if you decide to NOT use AIAB and start from scratch.

10 November 2001, 20:07

Ok Paul don't worry, first I'havent tried anything yet and decondly I have install AIAB in a total different folder which doesn't mix at all with the standard version of UAE (2 folders of the same progarmm one with AIAB), so when I'll try to install picasso96 will be in the one that there isn't the AIAB settings
Thank you

06 November 2001, 17:21	#1
akis Posts: n/a	picasso 96? anyone has an adf file of picasso 96?

07 November 2001, 11:07	#5
Paul RIP Friends Join Date: Sep 2005 Location: UK Posts: 2,157	Now in THE ZONE. If you give up you can cheat by using AIAB Last edited by Paul; 07 November 2001 at 15:17.

08 November 2001, 10:49	#11
Paul RIP Friends Join Date: Sep 2005 Location: UK Posts: 2,157	This is what you get if you use Winfellow or if you use the wrong display drivers. You must only install the uaegfx driver. Attached Thumbnails

08 November 2001, 10:52	#12
Paul RIP Friends Join Date: Sep 2005 Location: UK Posts: 2,157	Yes just tested it, you can only use OS 3+ Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Overclocking Picasso IV?	TjLaZer	support.Hardware	5	05 October 2018 19:01
picasso IV again	orange	support.Hardware	12	15 March 2011 08:23
Picasso IV and SD/FF	CrashMidnick	support.Hardware	5	12 July 2010 20:40
Who has a picasso IV?	alexh	support.Hardware	31	19 June 2007 10:23
Picasso II	Oscar Castillo	MarketPlace	3	10 February 2003 09:52

06 November 2001, 17:52	#2
CodyJarrett Global Moderator Join Date: Mar 2001 Location: UK Age: 46 Posts: 6,160	You can find Picasso 96 at the Aminet here: http://uk.aminet.net/pub/aminet/gfx/board/Picasso96.lha http://uk.aminet.net/pub/aminet/gfx/...casso96.readme You can unpack it with LHA here: http://uk.aminet.net/aminet/dirs/ami...rc/lha150r.run http://uk.aminet.net/aminet/dirs/ami...lzxkeyfile.lha There's no need to post in multiple sections of the board, as we will read all new messages.

06 November 2001, 21:48	#3
akis Posts: n/a	thabk you for the links.I guess I'll have to do it under windows.Hope it works thanks again Sorry for the multiple posts

07 November 2001, 11:00	#4
Paul RIP Friends Join Date: Sep 2005 Location: UK Posts: 2,157	I have converted the lha of Picasso 96 into a zip file for you. 1. Download winzip file from the zone. 2. Open the winzip file in windows. 3. Click extract and select i.e. C:\Program Files\WinUAE\Harddrives 4. Click extract button. 5. Close winzip. 6. Run Winuae and load you config file. 7. Now click on Hard Drives tab. 8. Click Add Directory and select the Picasso96 directory [where you unziped the file to i.e. C:\Program Files\WinUAE\Harddrives\Picasso96] then give a volume name e.g. Picasso96 and click ok. 9. Goto configurations and save the new config. 10. Click O.K. to run workbench. 11. A new disk icon will show so click on it to open. 12. Run install. N.B. Backup workbench before you attempt this. Also you can only use UAEGFX.

07 November 2001, 14:27	#6
akis Posts: n/a	Thank you paul for your efford and help. I admitt, it was difficult tom ake all those extractions. Well I; ll download your file and try it at once Thanks again, oh by the way downloading AIAB and intalling it, prevents you from using other configurations or not? Thanks again

08 November 2001, 01:32	#9
akis Posts: n/a	Thank you both for your help I tried to install the picasso96 files,but something went wrong.When I tried to use a screen with the picasso, it said there were no mods or something,and it altered my workbench configuration so now everytime I boot up with an old HD conf file, in the beggining shows a screen that says something about picasoo not being able to find something and then boots up, which is a bit annoying and I will have to reinstall my workbench Anyway I'll keep on trying till I find what I do wrong,but I will back up my files this time Thank you both

08 November 2001, 10:27	#10
Paul RIP Friends Join Date: Sep 2005 Location: UK Posts: 2,157	Are you using Winfellow? if you are then that your problem. Picasso96 only works with Winuae. Could you give AIAB a try at http://aiab.emuunlim.com/ as it will save you this Headache. This is a good package for beginners as it has step by step instructions on how to set it up. Also AIAB has Picasso96 included. N.B. Remember to 1. back up everything. 2. You must use a KickStart 3 rom and have a Workbench 3.1 adf disk image to use AIAB. If you were not using a KickStart 3 rom and Workbench 3.1 this could be another reason why you are having Picasso96 problems. I will have a try with WB 2.1 to verify this.

08 November 2001, 17:43	#13
akis Posts: n/a	quote: Are you using Winfellow? Nop I use win UAE various versions quote: If you were not using a KickStart 3 rom and Workbench 3.1 this could be another reason why you are having Picasso96 problems. Nop I do use kick 3.0 and workbench 3.1 I do get the first image you have attached Paul but under the winUAE, never used Winfellow. I must have used the wrong drivers,but for now I can't seem able to find the right one. It's time to try the AIAB this time and I will get back with picasso96 after that.I won't give up!! Thank you

09 November 2001, 10:39	#14
Paul RIP Friends Join Date: Sep 2005 Location: UK Posts: 2,157	Just remembered something. Check the 'Workbench:Devs/Monitors' dir and move the monitors into the storage dir. You should leave just Uaegfx Pal Ntsc remove all other. This should solve your problem if you do not want to use AIAB. Let me know how you get on.

09 November 2001, 22:24	#15
akis Posts: n/a	Thank you paul.I just succedded with the AIAB thing,now I will deal with the picasso, I used to get along well with my amiga untill I tried to put her in a tower,unfortunatelly,ruined.An emulator thing won't stop me Thanks I'll keep you posted

10 November 2001, 09:44	#16
Paul RIP Friends Join Date: Sep 2005 Location: UK Posts: 2,157	NO STOP:eek There is NO need to install picasso 96 as AIAB has it preinstalled. You Only need to Install picasso 96 if you decide to NOT use AIAB and start from scratch.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

10 November 2001, 20:07	#17
akis Posts: n/a	Ok Paul don't worry, first I'havent tried anything yet and decondly I have install AIAB in a total different folder which doesn't mix at all with the standard version of UAE (2 folders of the same progarmm one with AIAB), so when I'll try to install picasso96 will be in the one that there isn't the AIAB settings Thank you