Sonnet 7200 PCI programming - Page 143

marpla · 10 November 2018, 16:39

I've tried another version of Quake that hangs on this screen:

https://images90.fotosik.pl/71/9d95418af2392c76.jpg

Causes an error:

https://images91.fotosik.pl/72/b8e2721466e74f9a.jpg

Can anyone count cyberpi for 100,000? My time is 2 minutes 31 seconds

Edit:
I installed Lha_WOS, when I first time started the program, the shell normally displayed the menu, unfortunately when I did it the second time the menu was displayed in slow motion

The calculation time of cyberpi has not changed.

10 November 2018, 17:55

You have not original Voodoo 3 , try with 3dfx Voodoo 3 2000 -3000 or Radeon 9200-9250 PCI , I think there is problem , or weak power take a multimeter and check Voltage

marpla · 10 November 2018, 17:58

Unfortunately, I do not have another card and the voltages are fine.

Wrangler · 10 November 2018, 20:49

Quote:

Originally Posted by marpla

Can anyone count cyberpi for 100,000? My time is 2 minutes 31 seconds

Admittedly, this is on a 750FX overclocked to 1GHz

grelbfarlk · 11 November 2018, 02:30

Quote:

Originally Posted by Wrangler

Admittedly, this is on a 750FX overclocked to 1GHz

1m 19s on a 550MHz Rapture which is slower than that.

Hedeon · 11 November 2018, 06:40

Try voxelspace.

The stuff that seems to work is 68k calling ppc functions and not the ppc executables calling 68k functions.

Do you have mmu.library installed? What happens if you install it in libs: then run MuScan and then run ppc stuff?

marpla · 11 November 2018, 10:23

Yes, I have mmu.library installed. when I run muscan there is no difference, it runs slowly.

https://images89.fotosik.pl/71/2677aabd707a226f.jpg

Voxelspace the same, very slow.

https://images92.fotosik.pl/71/bff4480c0fef5148.jpg

11 November 2018, 13:34

marpla , do you use CyberGraphX with mediator ? why ?

Hedeon · 11 November 2018, 13:48

MMU setup looks wrong with everything mapped to blank.

marpla · 11 November 2018, 14:11

Quote:

Originally Posted by Michaell

marpla , do you use CyberGraphX with mediator ? why ?

https://github.com/Mediators/UnreliableGuide

All manuals so recommend. Is there another possibility?

marpla · 11 November 2018, 14:12

Quote:

Originally Posted by Hedeon

MMU setup looks wrong with everything mapped to blank.

How can I change this?

11 November 2018, 14:16

Quote:

Originally Posted by marpla

https://github.com/Mediators/UnreliableGuide

All manuals so recommend. Is there another possibility?

exactly where ? always for voodoo and mediator was picasso96 the best , I never heard about good working with cybergraphx

marpla · 11 November 2018, 14:24

Quote:

Originally Posted by Michaell

exactly where ? always for voodoo and mediator was picasso96 the best , I never heard about good working with cybergraphx

3.1.2 Graphics card

NOTE: These instructions are kept intentionally simple. For Radeon/Voodoo users, there are good installation guides in the MMCD/MM_CD_UP.

Install Picasso96 2.1b (from Aminet) and choose the Cybervision 3D card.
Once the installation is complete, open DEVS:Monitors/
Rename the CVision3D monitor to Radeon or Voodoo (or some other suitable name for your PCI graphics card)
Edit the tooltypes for the monitor
Change the BOARDTYPE value to the name of the graphics card driver (which live in LIBS:Picasso96/), e.g. Radeon

11 November 2018, 14:28

Marpla do you have picasso96 or cybergrapxh system ?

Wrangler · 12 November 2018, 20:51

In case you missed it, Stratagus for WOS with multiplayer enabled is now on Aminet. Have fun!

trixster · 13 November 2018, 14:14

Gone

starship · 13 November 2018, 23:06

Quote:

Originally Posted by grelbfarlk

1m 19s on a 550MHz Rapture which is slower than that.

1m 21s on sonnet 533mhz.

deling · 15 November 2018, 20:57

Hi what I do wrong ?

nexus · 15 November 2018, 20:58

you are using wrong version of pci.library
http://www.elbox.com/download/pci13.6/pci.library

deling · 15 November 2018, 21:25

Quote:

Originally Posted by nexus

you are using wrong version of pci.library
http://www.elbox.com/download/pci13.6/pci.library

Helped but now i have other problem after Init PPC amiga reboot and loadwb
Mouse not working system freeze

10 November 2018, 16:39	#2841
marpla Registered User Join Date: Nov 2018 Location: Poland Posts: 24	I've tried another version of Quake that hangs on this screen: https://images90.fotosik.pl/71/9d95418af2392c76.jpg Causes an error: https://images91.fotosik.pl/72/b8e2721466e74f9a.jpg Can anyone count cyberpi for 100,000? My time is 2 minutes 31 seconds Edit: I installed Lha_WOS, when I first time started the program, the shell normally displayed the menu, unfortunately when I did it the second time the menu was displayed in slow motion The calculation time of cyberpi has not changed. Last edited by marpla; 10 November 2018 at 17:31.

11 November 2018, 10:23	#2847
marpla Registered User Join Date: Nov 2018 Location: Poland Posts: 24	Yes, I have mmu.library installed. when I run muscan there is no difference, it runs slowly. https://images89.fotosik.pl/71/2677aabd707a226f.jpg Voxelspace the same, very slow. https://images92.fotosik.pl/71/bff4480c0fef5148.jpg Last edited by marpla; 11 November 2018 at 10:56.

13 November 2018, 14:14	#2856
trixster Guru Meditating Join Date: Jun 2014 Location: England Posts: 2,337	Gone Last edited by trixster; 14 November 2018 at 22:04.

15 November 2018, 20:57	#2858
deling Registered User Join Date: Sep 2017 Location: Moon Posts: 102	Hi what I do wrong ? Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card	keropi	MarketPlace	12	15 March 2017 02:48
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000)	kronuz	MarketPlace	0	16 June 2013 00:29
eBay : Sonnet Quaddoubler	alexh	MarketPlace	3	07 May 2013 00:50
Overlay problem on GeForce 7200	Leandro Jardim	support.WinUAE	1	10 August 2010 15:50
Prometheus PCI & Voodoo 3 PCI GFX Card	Slayer	support.Hardware	21	05 September 2006 10:57

10 November 2018, 17:55	#2842
Michaell Posts: n/a	You have not original Voodoo 3 , try with 3dfx Voodoo 3 2000 -3000 or Radeon 9200-9250 PCI , I think there is problem , or weak power take a multimeter and check Voltage

10 November 2018, 17:58	#2843
marpla Registered User Join Date: Nov 2018 Location: Poland Posts: 24	Unfortunately, I do not have another card and the voltages are fine.

11 November 2018, 06:40	#2846
Hedeon Semi-Retired Join Date: Mar 2012 Location: Leiden / The Netherlands Posts: 1,993	Try voxelspace. The stuff that seems to work is 68k calling ppc functions and not the ppc executables calling 68k functions. Do you have mmu.library installed? What happens if you install it in libs: then run MuScan and then run ppc stuff?

11 November 2018, 13:34	#2848
Michaell Posts: n/a	marpla , do you use CyberGraphX with mediator ? why ?

11 November 2018, 13:48	#2849
Hedeon Semi-Retired Join Date: Mar 2012 Location: Leiden / The Netherlands Posts: 1,993	MMU setup looks wrong with everything mapped to blank.

11 November 2018, 14:28	#2854
Michaell Posts: n/a	Marpla do you have picasso96 or cybergrapxh system ?

12 November 2018, 20:51	#2855
Wrangler Registered User Join Date: Sep 2015 Location: London, UK Posts: 414	In case you missed it, Stratagus for WOS with multiplayer enabled is now on Aminet. Have fun!

15 November 2018, 20:58	#2859
nexus Registered User Join Date: Aug 2017 Location: USA Posts: 728	you are using wrong version of pci.library http://www.elbox.com/download/pci13.6/pci.library

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)