CDTV and MKL's ide

utri007 · 24 September 2015, 00:17

I just got MKL's ide adapter and I'm planning to use it with CDTV.

Just wondering, there is 2 wires, in Kipper2k's ide, this one has three /ovr /int2 /int6 do I need to connect all of them?

And could you please tell me where to get them on CDTV? Plese tell it to me like you would teaching a baby. I can't get them from diagnostic slot as my ram expasion sit there.

These signals : /ovr /int2 /int6

MKL's home page has gone long time ago.

I already have 3.1 kickstart, updated CDTV roms and 4mb ram expansion.

kipper2k · 24 September 2015, 04:40

Hi,

you will need to connect Int2 and ovr.

for the CDTV just look at the schematic for the signals, see what the ID of the connector is and then connect them to that place....

http://www.ianstedman.co.uk/Amiga/sc...chematics.html

(CN12 pins 11 and 13)

utri007 · 24 September 2015, 07:19

There is a tens of pictures in that archive. I haven't ever looked schematics, so I'm afraid it doesn't help.

I found this from amibay

It almost tells where to put those wires. This is a picture wich made me to get this board. It fits very nicely inside of CDTV.

Next I need to check what are those chips.

24 September 2015, 00:17	#1
utri007 mä vaan Join Date: Nov 2001 Location: Finland Posts: 1,653	CDTV and MKL's ide I just got MKL's ide adapter and I'm planning to use it with CDTV. Just wondering, there is 2 wires, in Kipper2k's ide, this one has three /ovr /int2 /int6 do I need to connect all of them? And could you please tell me where to get them on CDTV? Plese tell it to me like you would teaching a baby. I can't get them from diagnostic slot as my ram expasion sit there. These signals : /ovr /int2 /int6 MKL's home page has gone long time ago. I already have 3.1 kickstart, updated CDTV roms and 4mb ram expansion.

24 September 2015, 07:19	#3
utri007 mä vaan Join Date: Nov 2001 Location: Finland Posts: 1,653	There is a tens of pictures in that archive. I haven't ever looked schematics, so I'm afraid it doesn't help. I found this from amibay It almost tells where to put those wires. This is a picture wich made me to get this board. It fits very nicely inside of CDTV. Next I need to check what are those chips. Last edited by utri007; 03 March 2021 at 22:10.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zeus68k – Accelerator/IDE/RAM for the A500/2000/CDTV and others	mr.vince	News	806	07 July 2018 16:27
Is suggested to use both IDE peripherals on internal IDE channel of the 1200?	guybrush	support.Hardware	2	24 July 2015 10:52
WTB: CDTV laser, or CDTV drive, or CDTV	chiark	MarketPlace	15	09 February 2010 11:04
WTB: CDTV case / faulty CDTV / dead or alive	chiark	MarketPlace	7	26 September 2009 00:07
SCSI-IDE bridge + IDE to CF adapter - How can I make a backup?	Tuffy	New to Emulation or Amiga scene	2	02 April 2008 21:14

24 September 2015, 04:40	#2
kipper2k Registered User Join Date: Sep 2006 Location: Thunder Bay, Canada Posts: 4,323	Hi, you will need to connect Int2 and ovr. for the CDTV just look at the schematic for the signals, see what the ID of the connector is and then connect them to that place.... http://www.ianstedman.co.uk/Amiga/sc...chematics.html (CN12 pins 11 and 13)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)