15 August 2016, 23:52 | #1 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
OS4.1FE SDK in WinUAE - Installer fails
hi there,
I try to see, if there is a way to install the 4.1FE SDK in WinUAE - but at around 13/29, when installing the Perl Contributions, it stops/hangs/crashes. My best try was 89% of Perl (13/29), most of the time, it hangs at around 9%... so no luck with that SDK in emulation? Any clues? Oh... I try to install into "Work", which is a "Folder-Harddrive", run WinUAE 3.3 as admin on a Win10 PC system. Cheers! |
16 August 2016, 10:25 | #2 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
Does anyone succesfully installed 4.1SDK, when running 4.1FE in emulator?
|
16 August 2016, 11:04 | #3 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,510
|
First test is to confirm if it only happens with directory harddrives.
|
16 August 2016, 11:51 | #4 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
Yes, I would love to try this! but I am not able to create a hdf file. even if I run WinUAE in administrator mode, I get strange "drives", like access denied [ST-01108439209-wdnih3d2e910i48r30 500GB] and buttons to create a hdf are greyed out.
Maybe if I can get a premade, empty and dynamic 2GB hdf file somewhere, I can try |
16 August 2016, 12:02 | #5 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,510
|
Sounds like you are trying to add physical harddrive, not hardfile.
|
16 August 2016, 13:05 | #6 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
hmmm, will check this... the HDF must be SCSI 1, right? RDB enabled?
|
16 August 2016, 14:44 | #7 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,510
|
RDB: Yes. SCSI ID: just like you would do it with real hardware: any ID that is not in use by other drives and controller itself.
|
16 August 2016, 14:59 | #8 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
Ok, I just got SCSI 0: for the OS4.1FE hdf-flie assigned. I dont know, how many devices one SCSI controller can operate, to be honest. could be from 1 to 10, depends on the number of physical interfaces, to plug devices in, I believe.
But maybe, I am wrong So ID "0" is in use right now - then I´ll use ID "1" for the 2nd hardfile Oh - and I need to format the harddisk in Amiga OS4.1 to use it, right? If I remember correct, you will not see new HDF´s mounted on WB, until they are formatted (maybe I am wrong here, too) ,hehehe |
16 August 2016, 15:58 | #9 | ||
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,510
|
Quote:
Quote:
|
||
16 August 2016, 19:00 | #10 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
Good, I went to the CD/Harddisk section, went "Add hardfile", set "RDB Mode" + dynamic size + 2000 MB and "create". I typed "Work.hdf" but got "Work.vhd" instead...
I went on, by mounting OS4.1 plus Install CD and opend the "Media Toolbox" from the installer. Cyberstorm.scsi got a new disk "DH1:" and I mada a partition, saved the changes to the disk, reboot - still no hdf (but a slightly bigger vhd file), no new harddisk on the amiga WB (but mounting options are selected in WinUae) guess, I am too stooooopid to get another hdf file up and running... edit: hmmm, I got it working now... seems a bit strange - so I will try to setup another disk and try to find the error Last edited by elowan; 16 August 2016 at 19:22. |
16 August 2016, 19:58 | #11 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
Ok, the fault was, if the 2nd harddsik file was configurated as "SCSI 1" - that leads to:
1. You can see DH1: in Media Tool and create a partition 2. You can create a filesystem 3. you can save the changes to the disk and reboot 4. the changes (partition and filesystem) are gone! To fix this, I simply selected "cyberstorm Accelerator" instead of SCSI for other devices, than DH0: Now, I can partition, create filesystem and the changes are stored. After reboot, I get a harddisk icon on Amiga WB, saying "unformatted". After quick formating, the device can be used *yeah* Now back to my original testing: Installing 4.1FE SDK to my new "Work" harddisk(file) and see, if it completes the install... will report back |
16 August 2016, 20:09 | #12 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
boom : OS4.1 SDK and Codebench are installed
So I think, there was a problem with the "Folder-Harddisk" methode, maybe some files have names, that were not working with the hosts conventions or something like that! Cheers! |
16 August 2016, 20:47 | #13 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,510
|
I assumed so.
Quote:
It is a bug but this is far too big test case. Someone needs to narrow this down to some single command or something. |
|
18 August 2016, 08:52 | #14 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
the issue was kind of random, sometimes is came up after 9%, somtimes after 89% of the perl install... sorry, I dont be helpful
|
18 August 2016, 19:17 | #15 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,510
|
Log probably would have shown at least some hints.
|
19 August 2016, 08:58 | #16 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
uhm, you mean the WinUAE dump file?
|
19 August 2016, 10:16 | #17 |
Registered User
Join Date: Dec 2012
Location: germany
Age: 49
Posts: 374
|
if you want to investigate, I can make another "folder-harddisk" and try to install SDK to that and get you a log (winUAE-dump)
|
19 August 2016, 10:18 | #18 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,510
|
I meant log before the crash, there may be some warnings or other messages.
Dump file most likely is not very useful (I expect crash to be inside PPC emulator), but attach it anyway (if it isn't too huge). |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
USB MIDI 4 ports under WINUAE (OS3.9/OS4.1FE) | psykicko | support.WinUAE | 11 | 27 March 2016 22:26 |
OS4.1FE screen resolution | gaspi | support.WinUAE | 3 | 09 December 2015 09:01 |
WinUAE 3.1. / OS4.1FE Classic - Remount install iso problems | esc | support.WinUAE | 4 | 20 June 2015 16:19 |
When laptop not in dock, winuae just hangs when starting OS4.1FE | jonssonj | support.WinUAE | 7 | 03 March 2015 18:08 |
WHDLoad Installer Fails | Techx | project.WHDLoad | 0 | 19 April 2009 06:25 |
|
|