california access malibu boot rom - Page 2

Toni Wilen · 16 April 2017, 15:57

Perfect. That is all, thanks again.

This was quite simple controller, emulation is done

roy bates · 16 April 2017, 16:00

cheers,glad ot help

thats another one down then

mark_k · 16 April 2017, 17:35

Are there any other boards in the unit? Maybe a RAM board? Pics would be nice if possible, since it seems to be pretty rare.

roy bates · 16 April 2017, 20:23

yes there is a ram board as well,it had 2mb of fastram.i have maxed it out to 8mbwhile i was doing the repair

ill take a few pictures,but please dont ask me to take out the cards,they have been out a few times now during the repair

roy bates · 16 April 2017, 20:44

mark_k · 16 April 2017, 21:38

Thanks for that! Interesting, looks like the RAM board is made by Expansion Systems (DataFlyer label on it). So a previous owner must have added that themself, rather than the RAM board coming with the main unit. (Unless Expansion System took over/acquired California Access???)

roy bates · 16 April 2017, 22:48

no idea ,but i do know both cards were added later

i dont think the ram board was made by the same manufacturer as the scsi card

the machine is a amiga 1500,which as you probably know came with two floppy drives and no expansions installed
motherboard is a issue 6 with 2.04

mark_k · 16 April 2017, 23:04

Ah OK. I was thinking the boards were in one of these bad boys.

roy bates · 16 April 2017, 23:37

hahaha,yes that would nice to work on

the odd thing i found with this setup is the boot partition on the harddrive is write protected...which is very odd,i definitely felt like adjusting that

mark_k · 17 April 2017, 18:25

By the way, if you ever get any random expansion cards in for repair again, you can usually dump their ROM(s) by running a program on the Amiga, no need to remove the chip(s) from the board. No need to boot from hard drive either.

roy bates · 17 April 2017, 22:22

that wouldnt be easier in this situation

nothing wrong with any of the cards,for me it was easier to remove the bootrom and read it out in a programmer directly
plus i would have to deal with transfers to a pc to upload it here

so,not really an option for me

Mclane · 20 April 2017, 14:59

Thanks for the work Roy, I'll probably never use it but its great to see people pitching in to help Toni..

Cheers mate!

Paul.

roy bates · 20 April 2017, 21:10

no probs

it was luck really,i happen to be browsing the net for the card itself for info along with jumper settings for the ram card etc

and happen to see the winuae site looking for the bootrom

B14ck W01f · 06 May 2017, 05:38

Roy Bates = Sardine 2.0

06 May 2017, 05:38	#34
B14ck W01f m68k all the way Join Date: Aug 2011 Location: Koalaland Posts: 517	Roy Bates = Sardine 2.0 Last edited by B14ck W01f; 06 May 2017 at 10:13.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EUAE on MacOSX PPC - no CD ROM access	Reth	support.OtherUAE	0	24 May 2015 01:59
i need rom... a4091 scsi boot rom	elmorcilla	support.WinUAE	10	22 August 2014 01:59
support for AROS boot rom	Worfje	support.WinFellow	16	16 November 2011 22:43
Malibu rom	tomse	support.Hardware	0	04 July 2010 11:09

16 April 2017, 15:57	#21
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 45 Posts: 24,636	Perfect. That is all, thanks again. This was quite simple controller, emulation is done

16 April 2017, 16:00	#22
roy bates Registered User Join Date: Apr 2011 Location: birmingham Age: 52 Posts: 2,824	cheers,glad ot help thats another one down then

16 April 2017, 17:35	#23
mark_k Registered User Join Date: Aug 2004 Location: Posts: 3,185	Are there any other boards in the unit? Maybe a RAM board? Pics would be nice if possible, since it seems to be pretty rare.

16 April 2017, 20:23	#24
roy bates Registered User Join Date: Apr 2011 Location: birmingham Age: 52 Posts: 2,824	yes there is a ram board as well,it had 2mb of fastram.i have maxed it out to 8mbwhile i was doing the repair ill take a few pictures,but please dont ask me to take out the cards,they have been out a few times now during the repair

16 April 2017, 20:44	#25
roy bates Registered User Join Date: Apr 2011 Location: birmingham Age: 52 Posts: 2,824

16 April 2017, 21:38	#26
mark_k Registered User Join Date: Aug 2004 Location: Posts: 3,185	Thanks for that! Interesting, looks like the RAM board is made by Expansion Systems (DataFlyer label on it). So a previous owner must have added that themself, rather than the RAM board coming with the main unit. (Unless Expansion System took over/acquired California Access???)

16 April 2017, 22:48	#27
roy bates Registered User Join Date: Apr 2011 Location: birmingham Age: 52 Posts: 2,824	no idea ,but i do know both cards were added later i dont think the ram board was made by the same manufacturer as the scsi card the machine is a amiga 1500,which as you probably know came with two floppy drives and no expansions installed motherboard is a issue 6 with 2.04

16 April 2017, 23:04	#28
mark_k Registered User Join Date: Aug 2004 Location: Posts: 3,185	Ah OK. I was thinking the boards were in one of these bad boys.

16 April 2017, 23:37	#29
roy bates Registered User Join Date: Apr 2011 Location: birmingham Age: 52 Posts: 2,824	hahaha,yes that would nice to work on the odd thing i found with this setup is the boot partition on the harddrive is write protected...which is very odd,i definitely felt like adjusting that

17 April 2017, 18:25	#30
mark_k Registered User Join Date: Aug 2004 Location: Posts: 3,185	By the way, if you ever get any random expansion cards in for repair again, you can usually dump their ROM(s) by running a program on the Amiga, no need to remove the chip(s) from the board. No need to boot from hard drive either.

17 April 2017, 22:22	#31
roy bates Registered User Join Date: Apr 2011 Location: birmingham Age: 52 Posts: 2,824	that wouldnt be easier in this situation nothing wrong with any of the cards,for me it was easier to remove the bootrom and read it out in a programmer directly plus i would have to deal with transfers to a pc to upload it here so,not really an option for me

20 April 2017, 14:59	#32
Mclane Old retro god. Join Date: Apr 2002 Location: Northolt, West London Age: 59 Posts: 690	Thanks for the work Roy, I'll probably never use it but its great to see people pitching in to help Toni.. Cheers mate! Paul.

20 April 2017, 21:10	#33
roy bates Registered User Join Date: Apr 2011 Location: birmingham Age: 52 Posts: 2,824	no probs it was luck really,i happen to be browsing the net for the card itself for info along with jumper settings for the ram card etc and happen to see the winuae site looking for the bootrom

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)